Jet JSSG-10 Bedienungsanleitung
Slow Speed Wet Sharpener Accessories | 1
Slow Speed Wet Sharpener
jettools.com
JET now offers woodworkers advanced sharpening features
like torque adjustment for consistent pressure to the drive
shaft, variable dial speed control that maintains outer
wheel speed regardless of sharpening stone diameter, and
an oversized reservoir for better water management. This
combination of features is not available on any other system.
The JET Slow Speed Wet Sharpener is also equipped with a
tool storage tray and an assortment of eight accessories that
are sure to be our most popular.
Read on to see the full listing of features and accessories for
the JET Slow Speed Wet Sharpener.
MAINTENANCE KIT
ROTATIONAL BASE
(Shown Attached to Drawer
Base)
Stock No. 708022
Stock No. 708030
SLOW SPEED WET SHARPENER
•Enclosed Motor Housing keeps debris and water from interior
of tool
• Variable Dial Speed Control maintains outer wheel speed
regardless of sharpening stone diameter
• Torque Adjustment applies consistent pressure to drive shaft
• Oversized Water Tray has a ared top edge to capture more
water during sharpening
• Built-in Storage Tray provides a convenient place for
sharpening accessories
• Diameter Scale provides a quick reference of stone wheel
diameter
SLOW SPEED WET SHARPENER
STOCK NUMBER 708015
Model Number JSSG-10
Motor 1.8 Amps, 120V, 60Hz, 180W
Motor Speed (RPM) 90 – 150
Includes:
Slow Speed Wet Sharpener, 1 Leather Honing Wheel, 1 Stone
Grader, 1 Straight Edge Jig, 1 Angle Measuring Device,
1 Existing Angle Measuring Device, 1 Support Arm, Honing
Compound and Training DVD, and 1 Stone Wheel
Variable Dial
Speed Control
Sealed
On/Off
Switch
Rubber
Feet
Cord Wrap
Dual Storage
Trays
Ergonomic Carrying
Handle
Optional Drawer
Base
Storage Tray
Enclosed Motor
Housing
Oversized Water
Tray
Optional
Tool Rest
Optional
Support Arm
Torque
Adjustment
Slow Speed Wet Sharpener Accessories | 3
Stock No. 708026
SCISSOR JIG
• Mounts on the support arm and is used to
sharpen scissors and garden tools
Stock No. 708020
GOUGE JIG
• Mounts on the support arm and is used to
sharpen bowl gouges, spindle gouges and
V-tools
Stock No. 708041
EXISTING ANGLE MEASURING DEVICE
• Used to establish angle of a tool’s cutting
edge
Stock No. 708042
SLOW SPEED STONE WHEEL
• 10" diameter and 2" width provides ample
grinding surface area. Graded using the Dual
Surface Stone Grader and trued using the
Diamond Truing Tool.
SLOW SPEED WET SHARPENER ACCESSORIES
Stock No. 708024
MACHINE COVER
• Helps protect the machine when
stored or during transportation
Stock No. 708030
OPTIONAL BASE
• Quickly attaches
to the JET Slow
Speed Wet Sharp-
ener, and rotates 360°
for quick and easy posi-
tioning, postitive detents
every 90°
Stock No. 708022
MAINTENANCE KIT
• Bring out the best in
your JET® Slow Speed
Wet Sharpener by
using the convenient
maintenance kit.
Includes: brush,
magnet, marker, lighted
magnier, mineral oil,
belt dressing oil, parafn
wax and sand paper.
Slow Speed Wet Sharpener Accessories | 4
Stock No. 708019
KNIFE JIG
• Rests on the support arm and is used to
sharpen draw knives, pocket knives and
small cutlery up to 4" in length
Stock No. 708021
LONG KNIFE JIG
• Rests on the support arm and is used
to sharpenlarge knives and draw knives
over 4" in length
Stock No. 708017
STONE GRADER
• Dual surface Stone Grader dresses the wheel
for both ne and coarse sharpening
Stock No. 708018
DIAMOND TRUING TOOL
• Mounts on the support arm and is used to
true stone before and after use
Stock No. 708040
SUPPORT ARM EXTENSION
• Used in conjunction with the Support Arm,
creates a dual tool rest conguration allow-
ing for quick transition from sharpening to
honing
Stock No. 708039
SUPPORT ARM
• Mounts directly to the front and back of
the sharpener, can be used alone or in
conjunction with the wide assortment of
JET sharpening jigs
Stock No. 708031
AXE JIG
• Mounts on the support arm and is used to
sharpen axes and hatchets
Stock No. 708027
SIDE WHEEL GRINDING JIG
• Used in conjunction with the TR-1 tool rest
accessory to sharpen card scrapers
Stock No. 708043
LEATHER STROP WHEEL
• Removes burrs and polishes edges to
a razor sharpness. Use in conjunction
with honing compound
Slow Speed Wet Sharpener Accessories | 5
Stock No. 708032
PLANE CAMBER JIG
• Mounts on the support arm and is used to
camber planer blades up to 3" wide
Stock No. 708029
STRAIGHT EDGE JIG
• Mounts on the support arm and is used to
sharpen chisels, spokeshave blades and planer
blades
Stock No. 708025
CARVING TOOL JIG
• Rests on the support arm and is used
to sharpen small carving tools, small
gouges and small V-tools
Stock No. 708034
TOOL REST
• Mounts on the support arm; used to sharpen
scrapers, inshaves, scorps and any tools
requiring ...an angle like screw drivers and
scrapers
Stock No. 708033
ANGLE MEASURING DEVICE
• Used to establish the angle of the tool
beingsharpened in relation to the stone
wheel
Stock No. 708028
PROFILED LEATHER HONING WHEEL
• Constructed of genuine leather; ideal
for honing V-tools, gouges, and other
hard-to-reach areas
WMH TOOL GROUP
Elgin, IL 60123 U.S.A.
wmhtoolgroup.com
All Rights Reserved.
©2006 WMH TOOL GROUP, Inc.
Andere Handbücher für JSSG-10
2
Inhaltsverzeichnis
Andere Jet Elektrowerkzeuge Handbücher
Jet
Jet JJ-6HHDX Service-Handbuch
Jet
Jet J-1600R Service-Handbuch
Jet
Jet JDP-20VS-3 Service-Handbuch
Jet
Jet JCT-3620 Anwendungshandbuch
Jet
Jet JDP-15M Service-Handbuch
Jet
Jet J-1230R Service-Handbuch
Jet
Jet JJ-60S Bedienungsanleitung
Jet
Jet JAT-930 Anwendungshandbuch
Jet
Jet JWS-25X Betriebsanleitung
Jet
Jet JTM-1 Service-Handbuch
Jet
Jet JAT-101 Anwendungshandbuch
Jet
Jet JWJ-8CS Service-Handbuch
Jet
Jet SR-1650N Bedienungsanleitung
Jet
Jet IDP-15BV Bedienungsanleitung
Jet
Jet J-2500 Service-Handbuch
Jet
Jet BG-379 Service-Handbuch
Jet
Jet JJ-8CS Service-Handbuch
Jet
Jet JAT-910 Anwendungshandbuch
Jet
Jet JWP-12L Bedienungsanleitung
Jet
Jet FS-1636H Service-Handbuch
