Jetter JVM-206-K00-O21 Montage- und Bedienungsanleitung
User Manual
JVM-206-K00-O21
Display
We automate your success.
60886309_00
Jetter AG
Graeterstrasse 2
71642 Ludwigsburg
Germany
Phone
Switchboard +49 7141 2550-0
Sales +49 7141 2550-531
Technical Hotline +49 7141 2550-444
E-mail
Technical Hotline [email protected]
Sales [email protected]
Translation of the original User Manual
Revision 1.00.1
Date of issue 8/2/2021
This document has been compiled by Jetter AG with due diligence, and based on the known
state of the art. Revisions and further development of our products are not automatically
mentioned in a reviewed document. Jetter AG shall not be liable for errors in form or content,
or for missing updates, as well as for damages or disadvantages resulting from such failure.
Jetter AG Table of contents
JVM-206-K00-O21 User Manual iii
Table of contents
1 Introduction ......................................................................................................................................... 5
1.1 Information on this document .......................................................................................................5
1.2 Typographical conventions...........................................................................................................5
2 Safety ................................................................................................................................................... 6
2.1 General information......................................................................................................................6
2.2 Purpose ........................................................................................................................................6
2.2.1 Usage other than intended ...............................................................................................6
2.3 Warnings used in this document ..................................................................................................6
3 Product Description............................................................................................................................ 7
3.1 Design ..........................................................................................................................................7
3.2 Product Features..........................................................................................................................8
3.3 Nameplate ....................................................................................................................................8
3.4 Scope of delivery..........................................................................................................................8
4 Technical specifications..................................................................................................................... 9
4.1 Dimensions...................................................................................................................................9
4.2 Display..........................................................................................................................................9
4.3 Pushbuttons .................................................................................................................................9
4.4 Processor Kernel........................................................................................................................10
4.5 Mechanical specifications...........................................................................................................10
4.6 Environmental conditions ...........................................................................................................10
4.7 Electrical properties....................................................................................................................11
4.8 EMC values ................................................................................................................................11
4.9 Ports and interfaces ...................................................................................................................12
4.9.1 ISOBUS interface ...........................................................................................................12
4.9.2 USB interface .................................................................................................................12
4.10 Inputs/outputs according to ISO11786:1995 ..............................................................................13
4.11 Acoustic signal generator ...........................................................................................................14
4.12 Real-time clock...........................................................................................................................14
5 Mechanical installation..................................................................................................................... 15
5.1 Allowed mounting orientations ...................................................................................................15
6 Electrical connection ........................................................................................................................ 16
6.1 8-pin M12 connector (male) .......................................................................................................17
6.2 8-pin M12 connector (female) ....................................................................................................17
7 Identification and Configuration...................................................................................................... 18
7.1 Operating System Update via USB ............................................................................................18
Jetter AG Table of contents
JVM-206-K00-O21 User Manual iv
7.2 Operating System Update via CAN............................................................................................19
8 Programming..................................................................................................................................... 20
8.1 System Menu .............................................................................................................................20
8.1.1 Reserved Object IDs ......................................................................................................20
8.1.2 Key Codes......................................................................................................................24
8.1.3 Physical keys (shortcuts)................................................................................................25
8.2 Updating the System Menu ........................................................................................................26
8.3 Font Selection in the System Menu............................................................................................26
9 Maintenance and repairs .................................................................................................................. 27
9.1 Maintenance, repairs and disposal.............................................................................................27
9.2 Storage and shipment ................................................................................................................27
10 Service ............................................................................................................................................... 28
10.1 Customer service .......................................................................................................................28
11 Spare parts and accessories ........................................................................................................... 29
11.1 Accessories ................................................................................................................................29
Jetter AG Introduction | 1
JVM-206-K00-O21 User Manual 5 / 32
1 Introduction
1.1 Information on this document
This document forms an integral part of the product and must be read and under-
stood prior to using it. It contains important and safety-related information for the
proper use of the product as intended.
Target groups This document is intended for specialists with appropriate qualifications.
Only competent and trained personnel is allowed to put this device into operation.
During the whole product life cycle, safe handling and operation of the device
must be ensured. In the case of missing or inadequate technical knowledge or
knowledge of this document any liability is excluded.
Availability of infor-
mation
Make sure this document is kept at the ready in the vicinity of the product
throughout its service life.
For information on new revisions of this document, visit the download area on our
website. This document is not subject to any updating service.
Start | Jetter - We automate your success.
For further information refer to the following information products:
■Version updates
Information about new versions of software products or of the operating sys-
tem of your device.
■JetSym software Online Help
Detailed description of software functions with application examples
1.2 Typographical conventions
This manual uses different typographical effects to support you in finding and
classifying information. Below, there is an example of a step-by-step instruction:
üThis symbol indicates requirements which have to be met before executing
the following action.
►This sign or a numbering at the beginning of a paragraph marks an action in-
struction that must be executed by the user. Execute the instructions one after
the other.
ðThe target after a list of instructions indicates reactions to, or results of these
actions.
INFO Further information and practical tips
In the info box you will find helpful information and practical tips about your prod-
uct.
Jetter AG Safety | 2
JVM-206-K00-O21 User Manual 6 / 32
2 Safety
2.1 General information
When placed on the market, this product corresponds to the current state of sci-
ence and technology.
In addition to the operating instructions, the laws, regulations and guidelines of
the country of operation or the EU apply to the operation of the product. The op-
erator is responsible for compliance with the relevant accident prevention regula-
tions and generally accepted safety rules.
2.2 Purpose
2.2.1 Usage other than intended
Do not use the device in technical systems for which a high level of fail-safety is
required.
Machinery Directive This device is no safety-related part as per Machinery Directive 2006/42/EC, and
must, therefore, not be used for safety-relevant applications. This device is NOT
intended for the purpose of personal safety, and must, therefore, not be used to
protect persons.
2.3 Warnings used in this document
DANGER High risk
Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING Medium risk
Indicates a potential hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION Low risk
Indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
NOTICE Material damage
Indicates a situation which, if not avoided, could result in malfunctions or material
damage.
Jetter AG Product Description | 3
JVM-206-K00-O21 User Manual 7 / 32
3 Product Description
The entry-level HMI JVM-206-K00-O21 has a display that can be operated intu-
itively. Thanks to its Limited-ISOBUS-UT functionality it works together with
ISOBUS controllers. Communication takes place via the ISOBUS protocol.
3.1 Design
8
1
23456
7
9
Fig.1: Design
1Power button 2ISB button
3Programmable softkey 4Home button to exit the current
menu
5ESC button to exit the edit mode 6Up/Down buttons for navigation
within the system menu
7OK button to open the edit mode 8F1 … F12
Programmable softkeys
9TFT touch display
Jetter AG Product Description | 3
JVM-206-K00-O21 User Manual 8 / 32
3.2 Product Features
■5" touch display, high resolution
■12 softkeys
■Navigation buttons, ISB and power button
■2 digital inputs for tractor speed
■1 digital rear PTO speed input
■1 three-point digital input
■1 three-point analog input
■1 digital input for ignition signal
■Real time clock (RTC), battery-backed
■Limited-ISOBUS-UT
■16 MB flash memory
■Limited TECU function
■Calibration function for tractor speed signal
■Limited FS function
■Update via USB
■System menu customizable
3.3 Nameplate
2
3
1
54
6
7
Fig.2: Nameplate
1Logo 2Barcode
3Serial number 4Type designation
5CE logo 6Revision number
7Part number
3.4 Scope of delivery
Scope of delivery Item number Quantity
JVM-206-K00-O21 10001905 1
Jetter AG Technical specifications | 4
JVM-206-K00-O21 User Manual 9 / 32
4 Technical specifications
This chapter contains information on electrical and mechanical data, as well as
on operating data of the JVM-206-K00-O21.
4.1 Dimensions
198
138
R6
37,7
43,2
Fig.3: Dimensions in mm
4.2 Display
Category Description
Type TFT screen with touch function
Resolution 800 x 480 pixels
Size 5"
Background lighting LED, typically 500 cd/m2, dimmable
Horizontal viewing angle In each direction 70°
Vertical viewing angle 50° from above, 70° from below
Tab.1: Technical data - Display
4.3 Pushbuttons
Category Description
Number of membrane
keys
19 keys + power key
Background lighting Dimmable
Adjustable between
0 ... 100%
Typical service life 1,000,000 operations
Tab.2: Technical data - Keyboard
Key Behaviour ■Power ON/OFF: Press and hold for one second to turn the device on/off.
■ISB: Press and hold for one second to send the ISB message.
Jetter AG Technical specifications | 4
JVM-206-K00-O21 User Manual 10 / 32
4.4 Processor Kernel
Parameter Description
CPU STM32F4
FLASH 16 MB
SDRAM 8 MB
Tab.3: Processor Kernel
4.5 Mechanical specifications
Parameter Description Standards
Weight
Enclosure specifications
Material Plastic
Vibration resistance 10 Hz ... 150 Hz, 6 h ISO 16750-3
Shock resistance
Type of shock Half-sine wave ISO 16750-3
Intensity and duration 50 g for 18 ms
Number and direction 10 shocks in the directions of all three spatial axes
Tab.4: Mechanical specifications
4.6 Environmental conditions
Parameter Description Standards
Operating temperature -20°C ... +70°C ISO 16750-4
Climatic conditions Humid heat
Storage temperature -30°C ... +70°C ISO 16750-4
DIN EN 60068-2-1
DIN EN 60068-2-2
Air humidity 5 … 95 %
Degree of protection IP65 with mating connector plugged in
IP20 without mating connector
Tab.5: Environmental conditions
Inhaltsverzeichnis
Andere Jetter Monitor Handbücher
