JJC RM-E2 Bedienungsanleitung

JJC RM-E2

Infrared Remote Control Instruction

Thank you for purchasing JJC RME2 Infrared Remote Control, for the best performance,

please read this instruction carefully before use.

zTo use RM-E2 Remote Control

1. For the first time use, please pull out the plastic separator (if your remote control has it) at

the battery holder.

2. Mount the camera on a tripod (recommended) or place the camera on a stable, level

surface.

3. Press the button and rotate main command dial until (delayed remote) or (quick response

remote) is displayed in the control panel.

4. Aim the transmitter on the remote control at the infrared receiver on the camera (usually

within +/- 20 degree of the lens axis, from the left to the right and from the top to the

bottom) and press the shutter-release button on the remote control (when using the

remote outdoors, make sure that the subject is not backlit and that the line of site

between the transmitter and the infrared receiver is not blocked by the lens or other

obstacles).

5. How the camera focuses and shoots depends on the option selected for your camera's

custom setting. For further information, check your camera's manual.

6. Infrared cannot be seen by human eyes. So you will see no visible light from the LED on

the front end of the remote control when operating.

zTo Replace the Battery

1. The remote control is powered by a three-volt CR2025 lithium battery which is

already included in.

2. After sliding the latch in the direction shown to unlatch the battery holder, remove the

holder.

3. Remove the battery from the battery holder.

4. Insert a fresh battery with the face marked "+" on top.

5. Slide the battery holder into the remote until the latch clicks into place.

zSpecification

z100% compatible with Nikon MLL3 infrared remote controls..

zEasytoreplace CR2025 lithium battery.

zOperating temperature: 5 °C to 40 °C (40 °F to 105 °F).

zTypical Battery Life: up to 3 years, 20,000 exposures.

1 When the remote control is not in used for an extend period of time, please remove

the battery from the remote control.

2 Do not leave the remote control in any places exposed to excessive heat, humidity

3 Do not leave remote control on or near a television, refrigerator, or other appliance

with a magnetic field.

4 If the remote control gets wet, wipe it with a dry towel as soon as possible.

5 Do not use organic solvents, such as alcohol or paint thinner when cleaning the

remote control.

Compatible with NIKON Cameras

D3000 D5000 D90 D80 D70s

Digital SLR D70 D60 D50 D40 D40x

Film SLR F65 F75 N65 N75

Coolpix 9000 8800 8400 P6000

LiteTouch 150ED 140ED 130ED 110S 100W

Nuvis Nuvis S

Inhaltsverzeichnis

Andere JJC Fernbedienung Handbücher

JJC

JJC TM-Series Bedienungsanleitung

JJC

JJC JM-II Series Bedienungsanleitung

JJC

JJC SR-F2W Bedienungsanleitung

JJC

JJC TM-Series Bedienungsanleitung

JJC

JJC RM-E4 Bedienungsanleitung

JJC

JJC JF-U1 Bedienungsanleitung

JJC

JJC TM Series Bedienungsanleitung

JJC

JJC JM-II Series Betriebshandbuch

JJC

JJC RM-E5 Bedienungsanleitung

JJC

JJC WT-868 Bedienungsanleitung

JJC

JJC SR-RC4 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung