JL Audio Stealthbox SB-T-TACDC12/10TW3 Bedienungsanleitung

INSTALLATION GUIDE

for the

SB-T-TACDC12/10TW3

SKU# 94557

2012 & Up Toyota Tacoma Double Cab

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your authorized

JL Audio dealer. The installation professionals employed by your dealer have the necessary tools

and experience to disassemble and reassemble your vehicle properly. If you prefer to perform your

own installation, please read this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox®be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

Continued on Next Page

SB-T-TACDC12/10TW3 INSTR_SKU# 011350

INSTALLATION

DIFFICULTY:

OUT

ESTIMATED TIME:

2 HOURS

SPECIFICATIONS

Enclosure Type: Sealed

Driver Type: 10TW3-D4

Nominal Impedance: 2 ohms

Continuous Power Handling: 400 watts (RMS method)

INCLUDED HARDWARE

(2) Brackets

(4) 1/4 - 20 x 1” Hex Bolt

(4) 1/4” Lock Washer

(4) 1/4” Flat Washer

(2) 1/4 - 20 U-Nut

SB-T-TACDC12/10TW3 INSTR_SKU# 011350

POWER RECOMMENDATION

JL Audio recommends high quality ampliers such as the JL Audio XD300/1v2. The diagram below shows the recommended crossover settings for the XD300/1v2. For a detailed description of the amplier settings,

consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.

CONNECTIONS

Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your Stealthbox® amplier. Other kits

are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for both channels of the amplier. JL Audio

recommends using 12AWG speaker wire for subwoofers.

Continued on Next PagePage 2 • JL Audio, Inc., 2016

Continued on Next Page

SB-T-TACDC12/10TW3 INSTR_SKU# 011350

Page 3 • JL Audio, Inc., 2016

STEP 4

On the backside of the rear panel, locate the two recessed

areas, then measure and mark 1” down the center from the

edge as shown. Drill a 1/8” pilot hole on the mark.

STEP 8

Slide a 1/4 - 20 U-Nut through each of the 3/4” holes and

align them with the 7/16” holes as shown.

STEP 3

Empty out the storage pocket. Remove the clips that hold in

the rear panel and remove the panel.

STEP 7

Drill 3/4” holes on the marks made in the previous step. Use

caution so as not to drill through the back of the cab.

STEP 2

Carefully unclip the seat bolt covers at the corners of the rear

seat backs. Unbolt and remove the seat backs.

STEP 6

Measure and mark 1” to the right of each pilot hole. Enlarge

the 1/8” pilot holes in both the metal and the plastic to 7/16”.

Use caution so as not to drill through the back of the cab.

STEP 1

Empty out the back seat of the vehicle and fold the seats

down.

STEP 5

Reinstall the panel. Drill through the pilot holes made in the

previous step to create pilot holes in the metal. Use caution

so as not to drill through the back of the cab. Remove the

panel again.

Before drilling, always make sure that you are not

going to be drilling into any gas lines, brake lines,

tires, transmission lines, electrical wiring, exhaust

systems or anything else that might cause a reduction

in your weekly pay.

Always wear eye protection when drilling!

SB-T-TACDC12/10TW3 INSTR_SKU# 011350

Page 4 • JL Audio, Inc., 2016

MID/HIGH FREQUENCY DRIVER FITMENT

A variety of JL Audio coaxial and component systems will t in the factory speaker locations of you vehicle.

Front Speaker Size / Location: 6x9”- Front Doors

Fits JL Audio Models: TR690-TXi, C2-690tx

Rear Speaker Size / Location: 6-1/2”- Rear Door

Fits JL Audio Models: TR650-CXi, TR650-CSi, C2-650x, C2-650,

C3-650, C5-650x, C5-650 & ZR650-CSi

All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered

trademarks of JL Audio, Inc.“Ahead of the Curve”and its respective logo is a trademark of JL Audio, Inc.

For more detailed information please visit us online at www.jlaudio.com.

(954) 443-1100

www.jlaudio.com

10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA

CONGRATULATIONS!

You have completed the installation for this model. Enjoy your new Stealthbox®!

STEP 12

Attach speaker cable to the Stealthbox® and place the

enclosure back into position. Secure the enclosure using a

pair of 1/4 - 20 x 1” Hex Bolts, 1/4” Lock Washers, and 1/4” Flat

Washers as illustrated.

ST EP 11

Pictured is a Bracket attached to the Stealthbox®.

STEP 10

Attach each Bracket to the threaded inserts in the top of the

enclosure using a 1/4 - 20 x 1” Hex Bolt, a 1/4” Lock Washer,

and a 1/4” Flat Washer as illustrated.

STEP 9

If an amplifier will be mounted into the recess in the front of

the Stealthbox®, set the enclosure into position and mark the

location of the wire channel. Remove the enclosure, and drill

a 1” hole in the panel. Reinstall the panel into the vehicle.

Note: This step is not necessary if the amplifier will be

mounted elsewhere.

Andere JL Audio Autoempfänger Handbücher

JL Audio

JL Audio Stealthbox SB-Y-YXZ1/10TW3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-D-MGACAB/10W6v3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-CAN-MVX3PASS/10TW3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-GM-AVAL2/12TW3 Handbuch

JL Audio

JL Audio Stealthbox SMS-B-X5E70 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-F-ESCP/10W1V3 Bedienungsanleitung

JL Audio

JL Audio 94537 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-D-CHLGR/12W3v3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-GM-3GSLVCNSL/10TW1 Bedienungsanleitung

JL Audio

JL Audio XR650-CXi Bedienungsanleitung

JL Audio

JL Audio Stealthbox Bedienungsanleitung

JL Audio

JL Audio stealthbox CB-C-CTS/10TW3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-J-GCHWK2/10W3v3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-HY-SANFES/10TW3 Bedienungsanleitung

JL Audio

JL Audio 94635 Bedienungsanleitung

JL Audio

JL Audio SB-F-EXPED Bedienungsanleitung

JL Audio

JL Audio StealthMod SMS-F150-SPRCRW/PREM Bedienungsanleitung

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

JVC

JVC KD-AHD69 Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung