XCD Edge Controller Driver User Guide Limited Warranty
D/N: XCDE458000-00, Revision B 3
Limited Warranty
Nanomotion Ltd. (hereinafter NM) warrants the product (other than software)
manufactured by it to be free from defects in material and workmanship for a period
of time of one year (except those parts normally considered as
consumable/expendable components such as motor conditioning brushes). The
warranty commences thirty (30) days from the date of shipment.
NM warrants those parts replaced under warranty for a period equal to the remaining
warranty coverage of the original part.
NM’s sole and exclusive obligation under this warranty provision shall be to repair, or
at its sole option exchange defective products or the relevant part or component, but
only if: (i) the Purchaser reports the defect to NM in writing and provides a description
of the defective product and complete information about the manner of its discovery
within ten (10) days of its discovery; (ii) NM has the opportunity to investigate the
reported defect and to determine that the defect arises from faulty material, parts or
workmanship; and (iii) the Purchaser returns the affected product to a location
designated by NM. These provisions constitute the exclusive remedy of the
Purchaser for product defects or any other claim of liability in connection with the
purchase or use of NM products.
This warranty policy applies only to NM products purchased directly from NM or from
an authorized NM distributor or representative.
This warranty shall not apply to (i) products repaired or altered by anyone other than
those authorized by NM; (ii) products subjected to negligence, accidents or damage
by circumstances beyond NM control; (iii) product subjected to improper operation or
maintenance (i.e. operation not in accordance with NM Installation Manuals and/or
instructions) or for use other than the original purpose for which the product was
designed to be used.
NM shall not in any event have obligations or liabilities to the Purchaser or any other
party for loss of profits, loss of use or incidental, increased cost of operation or delays
in operation, special or consequential damages, whether based on contract, tort
(including negligence), strict liability, or any other theory or form of action, even if NM
has been advised of the possibility thereof, arising out of or in connection with the
manufacture, sale, delivery, use, repair or performance of the NM products. Without
limiting the generality of the preceding sentence, NM shall not be liable to the
Purchaser for personal injury or property damages.
