Joy-it ARD MEGA2560PRO Bedienungsanleitung

ARD_MEGA2560PRO

Arduino Mega 2560 compatible microcontroller, not an original Arduino

1. GENERAL INFORMATION

Dear customer,

thank you for choosing a Joy-IT product. Our board is a high quality small

form factor replica and compatible to the Arduino Mega 2560 but it is not an

original Arduino. The „MegaPRO Board“ is the right microcontroller board

for those who need many pins in a small form factor.

The ATMega2560 microcontroller oers you enough performance for your

ideas and projects. It is 101.52 x 53.3 mm in size and has more connections

than others with 54 digital in- / outputs and 16 analog inputs.

2. TECHNICAL SPECIFICATIONS

3. PINOUT

Model

EAN

Microcontroller

Input voltage

Digital IO

Analog IO

DC current IO

DC current 3.3 V

Storage

SRAM

EEPROM

Clock Speed

Dimensions

ARD_MEGA2560PRO

4250236812366

ATmega2560

6 - 9 V at VIN

54 of which 15 PWM

20 mA

50 mA

256 KB

(8 KB for Bootloader)

8 KB

4 KB

16 MHz

55 x 38 mm

microUSB Port

Reset-Button

Analog-Inputs

ICSP

Digital IO‘s

D2-D31

Power supply

Reset, AREF

TX, RX

Digital IO‘s

D32 - D53

If you start programming the Joy-IT ARD_Mega2560PRO, you have to install

a development environment and the drivers for the associated operating

system on your computer which is going to be used for programming.

The recommended development environment is the “Arduino IDE“ which

is released by the Arduino manufacturer as an open source soware. This

soware is aimed at beginners, due to concept and structure. It is

compatible to the Joy-IT ARD_Mega2560PRO and has next to the

development environment also the required drivers which make it

possible to start immediately.

The download for this soware can be found with the following link:

https://www.arduino.cc/en/Main/Soware

5. SOFTWARE SETUP

Aer installing the soware, the appropriate microcontroller board must be

set up in the programming environment. To do this follow the next two steps.

1. Select [Tools → Board] choose “Arduino / Genuino Mega or

Mega 2560“

4. SOFTWARE-INSTALLATION

2. Select [Tools → Port] choose the port marked with

„(Arduino / Genuino Mega or Mega 2560)

7. SUPPORT

We are also there for you aer your purchase. If any questions remain open

or problems arise, we are also available by e-mail, telephone and ticket

support system.

E-Mail: servic[email protected]

Ticket-System: http://support.joy-it.net

Phone: +49 (0)2845 98469 – 66 (10 - 17 clock)

For more information visit our website:

www.joy-it.net

SIMAC Electronics GmbH

Pascalstr. 8, 47506 Neukirchen-Vluyn

Published: 22.01.2021

Our information and redemption obligation according to

the electro-law (ElektroG)

Symbol on electrial and electronic products :

This crossed-out bin means that electrical and electronic products do not

belong into the household waste. You must hand over your old appliance to

a registration oice. Before you can hand over the old appliance, you must

remove used batteries and accumulators which are not enclosed by the

device.

Return options :

As the end user, you can hand over with the purchase of a new device your

old appliance (which has essentially the same functions as the new one) free

of charge for disposal. Small devices which do not have outer dimensions

greater than 25 cm can be submitted independently of the purchase of a

new product in normal household quantities.

Possibility of restitution at our company location during our opening

hours:

Simac GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn

Possibility of restitution nearby :

We send you a parcel stamp with which you can send us your old appliance

free of charge. For this possibility, you must contact us via e-mail at

servic[email protected] or via telephone.

Information about packaging:

Please package your old appliance safe during transport. Should you not

have a suitable packaging material or you do not want to use your own

material, you can contact us and we will send you an appropriate package.

6.FURTHER INFORMATION

Dieses Handbuch passt für folgende Modelle

Andere Joy-it Mikrocontroller Handbücher

Joy-it

Joy-it BOARD R3 DIP Bedienungsanleitung

Joy-it

Joy-it ARD MEGA2560R3 Bedienungsanleitung

Joy-it

Joy-it ARD MEGA2560R3 Bedienungsanleitung

Joy-it

Joy-it DIGISPARK Bedienungsanleitung

Joy-it

Joy-it PRO MICRO Bedienungsanleitung

Joy-it

Joy-it ARD_Mega2560R3 Bedienungsanleitung

Joy-it

Joy-it ARDUINO NANO V3 Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung