Joy-it VIEW 13 Bedienungsanleitung
JOY-IT VIEW 13
13,3‘‘ portable monitor with touchscreen
1. INFORMATION
Dearest Costumer,
Thank you very much for choosing our product.
In following, we will introduce you to what to observe while starting up and
using this product.
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.
The Joy-View was designed for the USB-type-C interface and inherits a
high-quality touchscreen besides the Full-HD-resolution. Many more devi-
ces like gaming consoles are supported with an additional Mini-HDMI-port.
With the enclosed smart case the Joy-View is not only protected on every
transport. Further, due to its pedestal, the case also oers a safe and upright
stand feature. In addition, the JOY-View has very low weight. That is why it
suits perfect for mobile use.
2.SAFETY INSTRUCTIONS
MOUNTING THE MONITOR
Please make sure the monitor is placed on stable ground and no cables get
in the way, otherwise there is a danger of injuries. Please consider when pla-
cing the monitor on another device, this devide must be able to withstand
the weight, otherwise this can result to damages of the device.
SWITCH OFF IN DANGER
In case the monitor shows unusal happenings like smoke or smells, please
switch it o immediately and remove the power supply. Continued use may
lead to re or electric shock.
NEVER OPEN CASE
The monitor contains parts which are exposed to power. Opening the case
may lead to re or electric shock.
NEVER INSERT FOREIGN OBJECTS INTO MONITOR
You should never insert foreign objects or liquids into the monitor. Should
this happen, please switch it o and disconnect from electricity. It can lead
to re or electric short circuits.
REMOVE CABLES BEFORE TRANSPORT
Please remove cables before tranportation. Otherwise this may lead to re
or short circuits.
DO NOT EXPOSE TO WATER
Any contact to water or even splash water can lead to re or electric shocks.
ORIGINAL POWER SUPPLY
While using a foreign power supply, it may lead to damages of the device or
re.
NEVER OPEN UP POWER SUPPLY UNIT
Opening the power supply unit may lead to electric shocks or re.
PLUGGING AND UNPLUGGING
You should always pull only on the plugs for plugging and unplugging, ot-
herwise the wirings can be damaged which may lead to danger of re or
electric shocks.
DO NOT DAMAGE CABLES
Please be aware to not damage the cable in any way and to protect it against
exposures like pressure or tractive, because this may lead to re or short
circuits.
ENVIRONMENTAL CONDITIONS
You should not use the monitor among extreme temperatures, high humidi-
ty or very dusty air, because it may lead to re, short circuits or damages to
the device.
3. TECHNICAL SPECIFICATIONS
Resolution 1920 x 1080
Breadth
Refresh rate
Brightness
Contrast
Color space
Sight angle
Screentype
Aspect ratio
Backgroundlight
Power supply
Loudspeaker
Inputs
Outputs
Operating temperature
Case
5 - 9 mm
60 Hz
300 nit
800 : 1
16.7M, NTSC 72%,
sRGB bis zu 100%
178 °
TFT IPS LCD
16 : 9
LED
PD 5 - 20 V, Type-C USB 3.0
double loudspeaker 8Ω2W
Mini HDMI, Type-C, PD
3,5 mm headpone jack
0 - 50 °C
Aluminium alloy
DO NOT TOUCH PLUG WITH WET HANDS
In case you touch the plug with wet hands, it may lead to re or electric
shocks.
4. SCOPE OF DELIVERY
1x Monitor
1x Mini HDMI to HDMI
Cable (1,5m)
1x USB A to USB Type-C
Cable (1m)
1x Smart Case
1x HDMI to mini HDMI
Adaptor
1x Type-C to Type-C Cable
(1m)
1x Power Supply (5V/2A)
1. POWER
Press and hold down: switching the monitor on/o
Press shortly: 1. Open the signal source menue
2. Close or return in the OSD Menue
2. + / MENU / -
Push the button (MENU) to open the OSD Menue
→ + / - to move through the menue
→ Push the button (MENU) to choose an option
Push up the button towards + to open the brightness menue
→ + / - for brighter/ darker
Push down the button towards - to open the volume menue
→ + / - for volum up and volume down
3. PD
Type-C port (supported PD) for power connection
4. HDMI
Mini-HDMI port for image transmission
5. Type-C
Type-C port for image transmisson, touchscreen and power
6. HP Headphones
port for audio output → 3,5 mm headphone jack
4.HDMI
5.Type-C
6.Loudspeaker
1.POWER
2.+ / Menue / -
3.PD
5. FUNCTIONALITY OF BUTTONS & INTERFACES
6. ON-SCREEN DISPLAY MENUE
BRIGHTNESS
CONTRAST
ECO
DCR
Setting of display's brightness
Setting of display's contrast
Adjusts the brightness for an activity
Rises the contrast for low display brightness
ASPECT Changes the format ( 16:9 & 4:3)
COLOR TEMP.
RED
GREEN
BLUE
Contains 3 user-dened color modes, cool and warm
Changes the blue shade in the picture
Changes the green shade in the picture
Changes the blue shade in the picture
LANGUAGE Chooses language in the On-screen display menue
OSD H. POS.
OSD V. POS.
OSD TIMER
TRANSPARENCY
Horizontal orientation of the OSD position
Vertical orientation of the OSD position
Sets the durance of OSD open inactively
Sets the transparency of the OSD
IMAGE AUTO
ADJUST
COLOR AUTO
ADJUST
RESET
AUTO
POWERDOWN
HDR MODE
Automatical orientation of the image
Automatical color temperature adjustment
Resets the settings to factory default
Automatic display power o when time limit is reached
Selection of HDR mode
SIGNAL SOURCE
LOW BLUE LIGHT
VOLUME
Chooses the input signal (HDMI or Type-C)
Chooses LOW BLUE LIGHT Mode (25, 50, 75, 100)
Adjusts the volume
7. SETTING OF THE MONITOR
1. Attach the smart case to the monitor.
CAUTION:
You have to x the smart case proper to the horizontal lying monitor, other-
wise it may fall over or drop.
2. Connect the monitor with your device and connect to electricity.
Hereto, you can use dierent methods.
A
Connecting the monitor without Touchscreen
1. Connect the monitor to electricity with the power supply or
with a power bank via USB type-A to USB type-C.
2. Connect the monitor with your device using the HDMI Cable.
power supply
PD
Mini HDMI
HDMI
1
2
Devices with HDMI or mini-HDMI connection are for example PC,
Laptop, Raspberry Pi, Xbox One, Xbox 360, Macbook Pro, Nintendo
Switch, Playstation 3, Playstation 4 etc.
Connecting the Monitor with Touchscreen
1. Connect the monitor with your laptop or Raspberry Pi using the
HDMI cable.
2. Connect your monitor with your laptop or Raspberry Pi also
using the USB A to USB Type-C cable.
power supply
PD
raspberry pi board
Mini HDMI
HDMI
Type-A
Type-C
1
2
Please note that the touchscreen is only able to work if it is connec-
ted with a Windows 7 / 8 / 10 laptop or a Raspberry Pi.
In case the monitor is not provided with enough power by the
USB-A port of your device, please connect it with a power sup-
ply additionally. The Type-C (not PD) port of the monitor still
needs to be connected with your laptop or Raspberry Pi via
the USB A port for operating the touch feature.
One Cable Connection for specic devices
Connect the monitor with your laptop/ tablet/ Android smartphone
using the USB Type-C cable.
In case the monitor is not supported with enough power by the
USB Type-C port, it may lead to image interferences or inter-
ruptions.
Type-C
Type-C
power supply
PD
Please check, whether the USB Type-C port of your laptop / tablet / smart-
phone supports Type-C image transmission and if your Type-C cable is a
USB 3.1 Gen 2 Type-C cable.
Devices which support USB Type-C port (Examples):
Game consols
Huawei
Nintendo Switch Tablet
Samsung
Mate 10, Mate 10 Pro, Mate 20 Pro
Mate 20 X, Mate 20, Mate 20 RS
P20 Pro, P20, P30, P30 Pro
MateBook 13, MateBook X Pro
MateBook X, MateBook E
Apple
Galaxy S8, Galaxy S8+, Galaxy S9
Galaxy S10, Galaxy Tab S4, Galaxy Tab A
Galaxy Book 2, Galaxy Tab S3
Galaxy Book, Notebook 9 Pro
Notebook 7 Spin, Notebook 9
Notebook Flash
iPad Pro (2018), MacBook, MacBook Pro
MacBook Air, iMac, iMac Pro
Microso Surface Book 2
Asus VivoBook Flip, ROG STRIX Hero Edition
ROG Zephyrus M GM501GS
ROG STRIX Scar Edition, ZenBook Pro 15
ZenBook S, ROG STRIX,
ROG STRIX GL503VDUH73
Dell XPS9380, XPS 13 9370, Inspiron 13
Inspiron 15, Alienware 17
Alienware 15 R4, Latitude 5590, G3 17
Inspiron 7777
HP Pavilion x360, ENVY x360, ENVY x2
Pavilion 15-CC610MS
Pavilion 15-CX0051MS
ENVY x2 Detachable 12-E068MS
ENVY Notebook 17-U193MS
Pavilion Gaming Desktop 790-0021
Pavilion 24-XA0031
Lenovo Legion Y7000, Miix 630, Ideacentre 730S
Flex 14 81EM000LUS
Flex 14 81EM000KUS
Flex 5 81 CA0013US, Ideapad 720S
Flex 5 81CA0016US
8. SUPPORT
We of course support you aer the purchase.
Should you have any questions or encounter problems, please feel free to
contact us via e-mail, phone und ticket support system.
E-mail: servic[email protected]
Ticket-System: http://support.joy-it.net
Phone: +49 (0)2845 98469 – 66 (10 - 17 o'clock)
For further information, please visit our website:
www.joy-it.net
www.joy-it.net
Simac Electronics Handel GmbH
Pascalstr. 8 47506 Neukirchen-Vluyn
Veröentlicht: 27.06.2019
PRODUCT RECOMMENDATION
The Joy-Pi is an experimental case based on the Raspberry Pi
3B/3B+/4B and is ideal for the entry into electrical engineering
and programming. The sophisticated case system oers a
perfect all-in-one environment and puts an end to many ddly
small parts solutions and cable chaos on the worktable.
The Joy-Pi is also very suitable for school projects, as you
can simply switch it o and close it at the end of the lesson
and then continue working on the project in the next lesson.
Another advantage of the case is its great mobility and
compactness. This allows you to take it with you wherever you
go and explore the Raspberry Pi universe with friends.
www.joy-it.net
SIMAC Electronics GmbH
Pascalstr. 8, 47506 Neukirchen-Vluyn
RB-JOY-PI EXPERIMENTAL AND EDUCATION CASE
▶21 stations for beginners as well as for advanced users
▶With 7" touchscreen display
▶Case contains many sensors and interactive modules
Inhaltsverzeichnis
Andere Joy-it Touch-Screen Handbücher
Beliebte Touch-Screen Handbücher anderer Marken
Elecro Engineering
Elecro Engineering Poolsmart Plus Montageanleitung
Johnson Controls
Johnson Controls IQ4 HUB Bedienungsanleitung
Elo TouchSystems
Elo TouchSystems ET2270L Bedienungsanleitung
Elo TouchSystems
Elo TouchSystems ET1002L Bedienungsanleitung
Elo TouchSystems
Elo TouchSystems 3201L Bedienungsanleitung
Duratec
Duratec S15 Bedienungsanleitung
