Juhui JH-TX162 Bedienungsanleitung

JH-TX162

Auto-scan Type

Multi-frequency

Face to face copy

Up to 4 different remotes in 1

NEW UNIVERSAL

REMOTE CONTROL

www.juhuico.com

FIXED CODE

DUPLICATING PROCEDURES

1.While pressing the button 1 of the remote, press 4 times the button 2.

2.Release both buttons. Now the led of the remote emits a quick flash every 2 sec.

3.Place the original remote control in front of the remote , at about 2-3 cm of distance (as shown in the picture

below).

4.Press and retain pressing the button of the original remote control that you want to copy until the remote's led

will change frequency of flashing (faster than before), as confirm of the correct copy of the code.

5.While the LED is flashing, press the button of the JH-TX162 where you want to store ,the remote'code just

copied, until the led will turn off.

6.The copy has happened with success, verify on the automation the orderly functioning of the new remote control.

Note:

•If the LED will flash only 3 times and then will turn off, it means that the code hasn‘t been copied well. In this case

repeat the operation from the point 1.

•The memory of the remote is completely re-writable.

•To duplicate a second button, repeat the operation from the point 1.

Best position for duplication

www.juhuico.com

ROLLING SIMPLE

DUPLICATING PROCEDURES

1.While pressing the button 1 of the remote , press 4 times the button 2.

2.Release both buttons. Now the led of the remote emits a quick flash every 2 sec.

3.Place the original remote control in front of the remote , at about 2-3 cm of distance (as shown in the picture

below).

4.Press and retain pressing the button of the original remote control that you want to copy until the remote's led

will change frequency of flashing (faster than before), as confirm of the correct copy of the code.

5.While the LED is flashing, press the button of the JH-TX162 where you want to store, the remote'code just

copied, until the led will turn off.

6. The copy has happened with success.

7.Proceed with the remote control recognition on the receiver by the procedure (verify the models list - see

5-6-7 pages) or follow the producer's methods.

Note:

•If the LED will flash only 3 times and then will turn off, it means that the code hasn't been copied well. In this case

repeat the operation from the point 1.

•The memory of the remote is completely re-writable.

•To duplicate a second button, repeat the operation from the point 1.

To activate the remote control on the receiver for models marked with proceed as below:

1. First of all you must be closed to the automation.

2. Press and retain pressed the programmed button for about 10 sec, when the LED start to flash, release the button.

3. Wait until the LED will turn off. The operation has been done, now you can use your new remote control.

To activate on the receiver all the others models: Refer to the instructions of the original model.

NOTE: The seed code of the remote can be emitted as below:

1.Press the buttons 1 and 2 simoultaneously for 8 sec. and release them when the LED start to flash

2.While the LED is flashing press the button with the seed code needed.

ATTENTION!! Every kind of receiver can have the “radio-mode” disarmed. In this cases will be necessary insert the new remotes controls with the “manual procedures”

AMC

AMC:Automatic matching code

www.juhuico.com

1.While pressing the button 1 of the remote, press 4 times the button 2.

2.Release both buttons. Now the LED of the remote emits a quick flash every 2 sec.

3.Place the original remote control in front of the remote, at about 2-3 cm of distance

4.Press and retain pressed the button of the original remote control that you want to copy until the remote's led will turn on

with a fix light and then emits a double flash every 2 sec.

5.Transmit now the seed code of the original remote control (by pressing the rear hide button or the buttons 1 and 2

simultaneously in the new models)

6. Now the LED will flash quickly, press the button of the remote where you want to store the code just copied, until the

LED will turn off.

7.Now activate the procedure to insert the new remote control on the receiver.

ATTENTION, PLEASE: Verify that the remote control to be copied is a MASTER.

Pressing any button, the LED should issue a double flash rather than switch on immediately as a fixed light.

1.While pressing the button 1 of the JH-TX162, press 4 times the button 2.

2.Release both buttons. Now the LED of the JH-TX162 emits a quick flash every 2 sec.

3.Place the original remote control to clone in front of the JH-TX162 at a distance of 2-3 cm.

4.Press and retain pressed the original remote control button that you want to copy until the LED JH-TX162 switches on a fixed light and then It stars to emit a double flash every

2 seconds.

5.Predispose the FAAC/GENIUS remote control for the emission of the seed code (by pressing simultaneously the buttons 2 and 3)

6.While the FAAC/GENIUS LED is flashing, place it in front of the JH-TX162, at about 2-3 cm of distance and press the button that you want to copy until the remote’s led will

change frequency of flashing (faster than before), as confirm of the correct copy of the code.

To activate the remote control on the receiver for models

marked with proceed as below :

1. First of all you must be closed to the automation

2. Press and retain pressed the programmed button for about

10 sec, when the LED start to flash, release the button..

3. Wait until the LED will turn off. The operation has been

done, now you can use your new remote control .

To activate on the receiver all the others models:

Refer to the instructions of the original model.

NOTE: The seed code of the JH-TX162 can be emitted as

below:

1. Press the buttons 1 and 2 simoultaneously for 8 sec. and

release them when the LED star to flash.

2. While the LED is flashing press the button with the seed

code needed.

ATTENTION!! Every kind of receiver can have the “radio-

mode” disarmed. In this cases will be necessary insert the

new remotes controls with the “manual procedures”.

BFT AMC

AMC

AMC:Automatic matching code

www.juhuico.com

To activate the remote control on the receiver for models

marked with proceed as below :

1. First of all you must be closed to the automation

2. Press and retain pressed the programmed button for about

10 sec, when the LED start to flash, release the button..

3. Wait until the LED will turn off. The operation has been

done, now you can use your new remote control .

To activate on the receiver all the others models:

Refer to the instructions of the original model.

NOTE: The seed code of the JH-TX162 can be emitted as

below:

1. Press the buttons 1 and 2 simoultaneously for 8 sec. and

release them when the LED star to flash.

2. While the LED is flashing press the button with the seed

code needed.

ATTENTION!! Every kind of receiver can have the “radio-

mode” disarmed. In this cases will be necessary insert the

new remotes controls with the “manual procedures”.

1.While pressing the button 1 of the remote, press 4 times the button 2.

2.Release both buttons. Now the LED of the remote emits a quick flash every 2 sec.

3.Place the original remote control in front of the remote , at about 2-3 cm of distance.

4.Press and retain pressed the button of the original remote control that you want to copy until the remote's led will turn on

with a fix light and then emits a double flash every 2 sec.

5.Press and retain pressed once again the same button of the original remote control.

6.Now the LED will flash quickly, press the button of the remote where you want to store the code just copied, until the LED

will turn off.

7.Now activate the procedure to insert the new remote control on the receiver.

433-868

AMC

AMC:Automatic matching code

www.juhuico.com

ACM

TX2, TX2 COLOR, TX4

ADYX

TE4433H BLUE, 433-HG BRAVO

AERF

COMPACT, HY-DOM, MERCURI B, MERCURI C,

SABUTON, MARS, SATURN, ST3/N, TERRA, TMP-1,

TMP-2, UNITECH

ALLMATIC

BROWN, BROWN RED, BRO.OVER, PASS,

MINIPASS, TECH3

APERIO

GO, GO PRO, GO MINI

APERTO (Sommer)

TX02-434-2,TX02-868-2 BLUE,4025 TX02-868-2,4022

TX02-434-2, 4020-TX03-434,TX-03-868-4,4013,TX03-

434-4

APRIMATIC

TR2/TR4, TM4, TXM

ATA

PTX4 BLUE, PTX4 PINK

AVIDSEN

104251, 104250, 104250 OLD, 104250

RED, 104257, 104350, 654250

BALLAN

FM400, FM400E,FM404B,4013

BENINCA

TO. GO. WV, TWV, ROLLKEY, APPLE, LOT WCV,

CUPIDO, TO.GO. QV, IO,

LOT2WCV,LOT1W,LOT2W,LOT4W,LOT1WM,LOT2W

M, T2W,T4W,APPLE

BESIDE

BEZAP,HIT

BFT

MITTO, MITTO M ( MITTO2M/MITTO4M), MITTO RCB

(MITTO RCB02/RCB04), MITTO A (MITTO 2A/MITTO

4A), MITTO B, TRC(TRC2/TRC4), GHIBLI, MURALE,

KLEIO,TE01,TE02,TE04,RB4 MURALE

CAME

T431,T434,TOP432A,TOP434A,TOP432,TAM432SA,TO

P432NA

CARDIN

TRQ S449

(TRQ449100/TRQ449200/TRQ449300/TRQ449400),

TRQ S449 GREEN (PRECODE),

TXQ S449 (TXQ449200/TXQ449300/TXQ449400), TXQ

S449 GREEN, TRQ S486 (TRQ486200/TRQ486400),

TXQ S486 (TXQ486200/TXQ486400), S437 TX,

XRADO,S449,S476TX2,S476TX, S486

CASALI

JA33 AMIGO, GENIUS/CASALI A252RC

AMC:Automatic matching code

AMC

www.juhuico.com

CASIT

ERTS92B,ERTS92T,ERTS476D,ERTS20DQ,ERTS476D,

ERTS476Q

CELISA

S10 1, S10 2

CENTURION

CLASSIC,NOVA,SMART

CHAMBERLAIN/LIFT

MASTER/ MOTOR LIFT

953ESTD, 371 LM, 971 LM, 84330E, 94334CE,

94333E/94334E/94335E, 9747E, 1A5639-7, 1A5477,

1A6487, 132B2372, 94330EML/9333EML/94335EML,

84330EML/84333EML/84335EML, 8747EML

CLEMSA

MUTANCODE, T, T-8, E-CODE N, MASTERCODE MV

CPS

TCP3,CPS1,TCP3,CPS2,TCP3,CPS4,TCP3

DASPI

HAPPY2,POPS 2, ZERO RC( ZERO 2RC,ZERO 4RC)

DEA SYSTEM

TR MIO,133 1,433 2,433 4,GENIE,PUNTO S2, PUNTO

278, GOLDR, GENIE R 273, GENIE R-GT2N

DELMA

MIXARD 433 1, MIXARD 433 2,KING 433 2

DICKERT

MAHS433 01, MAHS433 04

DITEC

GOL,GOL4C,BIXLS2,BIXLP2,BIXAG4, BIXLG

DOITRAND

MPSTF2E,JAUNE

DOORMATIC

SAW

DOORHAN

TRANSMITTER 4

DUCATI

TSAW1,TSAW2,TSAW3,124,TE2

ECOSTAR

RSE,RSC,RSZ

ELBE

501,502,504,502A,504A

ERREKA

IRIS, ROLLER 2, ROLLER 433, ROLLER 868,

SOL433, SOL868, VEGA 433, VEGA 868

ELCA

IRIS,ASTER 2,ASTER

1000,ASTER 1001

AMC:Automatic matching code

AMC

www.juhuico.com

FAAC

XT4 433 RC,TE433HG

TM1 433 DS,TM2 433 DS,TM3 433

DS,433L2,433L4,TM22 433 SLP,TM4 433 SLP, TML

433SLH, TML 868 SLH, DL 868 SLH, XT 868SLH, XT

433 SLH, T 868 SLH, T 433 SLH, XT 433 RC,

FADINI

JUBI-SMALL,433 M2, ASTRO 433-2,ASTRO 433-

4,JUBI2/JUBI4

FERPORT

TAC1,TAC2,TAC4,TAC 1K,TAC 2K,TAC 4K,TAC2KR

GIBIDI

OPEN TMB, OPEN OUT, AU1600, AU1600

WOOD, AU1680, AU1680 WOOD, DOMINO

GULLIVER

MDW

GENIUS

BRAVO TE4433H, ECHO

GENIE

GITR-3, GIT, GICT390, GIFT390-1, G3T-BX, G1T-BX,

GM3T, GICTD, GIFTD

GIBIDI

AUO1590,AU1600,DOMI-NO AU1680 WOOD,GIBIDI

AU1610,AU1810,AUO3000,DTC 4334

HORMANN

HSM2,HSM4

JCM

NEO, TWIN, GO, GO PORTIS, GO NORTON

JAY

UBEI X1SL1,UBET 11,UBET 21,UBET 31,UBET

41,UBET 61

KBLUE

ETH-TEL01

KEY

900TXB-42R,SUB44,TXB-44R,TXG-44R

KING GATES

STYLO, CLIPPER

KLING

KUA, KUA E, KUA S

LABEL

SPYCO,RJW4E

LEB

TMW

LINCE

LR2035

LIFE

FIDO

AMC:Automatic matching code

AMC

JA332 AMIGO 2 868,JA334 AMIGO

4, AMIGOLD 2/AMIGOLD 4,

KILO 2/KILO 4 433 JLC,

KILO2/KILO4 868 JL

www.juhuico.com

LINEAR

MCT-11, ACT-21, ACT-22, STING RAY ACT-31,

STING RAY ACT-34B

MHOUSE

TX4

TX1,TX2,TX3

MARATEC

D101,D12,DIGITAL302,DIGITAL304

MERLIN/PROLIFT

M230T(PROLIFT),M430R(PROLIFT)

MERLIN2.0

E945M,E943M,E940M

MERLIN/PROLIFT

M842(GREENREMOTE),M832(GREEN

REMOTE),M844(GREEN REMOTE),C945,C940,C943

MHOUSE

TX4,TX3,GTX4

MOOVO

MT4G

MONSEIGNEUR

ARC

NICE

SMILO,FLOR-S,VERY-VR, INTI,FLO2,FLO4, FLOR-S

ERA, ONE (ON), ON ERA, ERGO, PLANO, ONE (ON

FM)

NORTON

NEO, TXCD, GO NORTON, GO

MINI NORTON

NOVOTECNICA

BIXL2

NOVOTRON 502-504-512MIX43-2,MTR40-2,MCHS43-

2,MHS43(2-4),MNHS433(2-4), MCHS, MINI-

NOVOTRON 504, MICRO-NOVOTRON 502, MICRO-

NOVOTRON 504, MICRO-NOVOTRON 31, MICRO-

NOVOTRON 51, MINI-NOVOTRON 30, MINI-

NOVOTRON 50, MNHS

NOVOFERM

NOLOGO

ECO DIP

NORMSTAHL

T433

O & O

T.COM,TWIN,TX,TWIN,TX2/TX4(NEO),T.COM R4-

2/T.COM R4-4, T.COM R8-2/T.COM R8-4,

OG62,OG64

OPENOUT

TMQ

PECCININ

TX MENBRANA

AMC:Automatic matching code

AMC

www.juhuico.com

PORTAMATIC

MPH01,MPH02

PRASTEL

TC2E(4E),SLIM,BFOR,MPSTP2E,MPSTF2,MPSTF4,M

PSTF2RE, MPSTF4RE,,MPSTP2E,MPSTP2E BLUE,

MTE(MT4E,MT2E),TRQ-P(TRQ4P,TRQ2P),

MPSTLE(MPSTL-1E,MPSTL-2E,MPSTL-4E)

PROEM

ER4C4ACS

PROGET

ETY_433N2,ETY_433N4

PROTECO

TX433,EUROMATIC

PUJOL

MARTE,P215, TWIN, VARIO, VARIO MARS, VARIO

OCEAN, NEO

QUASAR

433

RIB

LITHIO

ROPER

NEO, GO ROPER, GO MINI ROPER

SABUTOM

BROOVER, BROSTAR

SEA

SMART DIP

SEAV

BE HAPPY RS(BE-HAPPY-RS1,BE-HAPPY-RS2,BE-

HAPPY-RS3),BE-SMART RSX, BE-HAPPY RH1,BE-

HAPPY RH2,BE-HAPPY RH3

SECULUX

NEO

SILVELOX

Mhz 2007, QUARZ SAW

SIMINOR

CVXNL, MITTO, SIM433

SECURVERA

SV R2C,SV R4C,SV R6C

SERAI

OG/52,OG54,OG82,OG84,OG/28,OG48,OG62,OG64

SIMINOR

S433(2T-4T),ER2C4ACS,ER4C4ACS

SOMFY

STAGNOLI

KALLISTO, VENUS AV223

AMC:Automatic matching code

AMC

TELIS 1 RTS/TELIS 4 RTS

AMC

KEYTIS 2 NS/KEYTIS 4 NS,KEYGO 4

RTS,SOMFY 433-NLT4 BEIGE, SOMFY

433-NLT2 RTR, SOMFY TX2 433MHZ

Andere Juhui Fernbedienung Handbücher

Juhui

Juhui JH-TX278 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung