JUMO LOGOSCREEN Bedienungsanleitung
JLOGOSCREEN nt
Paperless Recorder
with TFT display and
CompactFlash card
B 70.6580.1
Operating Instructions
08.06/00453819
Menu structure of the paperless recorder
vDevice manager, Chapter 7, Page 51
vMemory manager, Chapter 6, Page 47
vAlarm and event lists, Chapter 5, Page 43
vOperator level (visualization), Chapter 3, Page 23
vMemory presentation (History), Chapter 4, Page 39
Contents
1 Introduction 5
1.1 Preface .......................................................................................................... 5
1.2 Arrangement of the documentation ........................................................... 6
1.3 Typographical conventions ......................................................................... 8
2 Device description 11
2.1 Displays and controls ................................................................................ 12
2.2 Operating principle and graphic elements .............................................. 14
2.3 Operating example ..................................................................................... 18
2.4 Group and plant management (batches) ................................................. 20
3 Operator level (visualization) 23
3.1 Activate operator level ............................................................................... 23
3.2 Overview of header lines ........................................................................... 24
3.3 Curve presentation ..................................................................................... 25
3.4 Bar graph presentation .............................................................................. 26
3.5 Textual presentation ................................................................................... 27
3.6 Process diagram ........................................................................................ 28
3.7 Binary presentation .................................................................................... 28
3.8 Report .......................................................................................................... 29
3.9 Batches/plants ........................................................................................... 30
3.9.1 Current batches ............................................................................................ 30
3.9.2 Completed batches ...................................................................................... 32
3.9.3 Batch control through barcode reader ......................................................... 33
3.10 Counters and integrators .......................................................................... 36
3.11 Comment entry ........................................................................................... 37
4 Memory presentation (History) 39
Contents
5 Alarm and event lists 43
5.1 Call from one of the visualization modes ................................................. 44
5.2 Call from the memory presentation .......................................................... 46
5.3 Symbols ....................................................................................................... 46
6 Memory manager 47
7 Device manager 51
7.1 Logging in and logging off ......................................................................... 53
8 Entering text and values 55
8.1 Text entry ..................................................................................................... 55
8.1.1 Entering characters ...................................................................................... 55
8.1.2 Insert space .................................................................................................. 57
8.1.3 Delete character. .......................................................................................... 57
8.1.4 Move cursor. ................................................................................................. 57
8.1.5 Enter text from text list ................................................................................. 57
8.1.6 Finish entry ................................................................................................... 57
8.1.7 Reject entry .................................................................................................. 58
8.2 Entry via selection field .............................................................................. 58
8.3 Entering values ........................................................................................... 59
8.3.1 Whole numbers (integers) ............................................................................ 59
8.3.2 Real numbers (floating point) ....................................................................... 60
9 Index 61
5
1 Introduction
1.1 Preface
Please read these operating instructions before commissioning the
instrument. Keep the operating instructions in a place which is accessible to
all users at all times.
Please assist us to improve these operating instructions, where necessary.
Your comments will be appreciated.
H
If any difficulties should arise during commissioning, you are asked
not to carry out any manipulations that could endanger your rights
under the instrument warranty!
Please contact the nearest subsidiary or the head office in such a
case.
E
When returning modules, assemblies or components, the
regulations of EN 61340-5-1 and EN 61340-5-2 “Protection of
electronic devices from electrostatic phenomena” must be
observed. Use only the appropriate ESD packaging for transport.
Please note that we cannot accept any liability for damage caused
by ESD.
ESD=Electro Static Discharge
B
1 Introduction
6
1.2 Arrangement of the documentation
The documentation for this instrument is addressed to equipment
manufacturers (OEMs) and users with appropriate technical expertise. It
consists of the following parts:
Instrument documentation in printed form
B 70.6580.1 Operating Instructions
The operating instructions are an extract from the operating manual and cover
the basic operation of the paperless recorder.
B 70.6580.4 Installation Instructions
The installation instructions describe the installation of the recorder and the
connection of the supply and signal cables. The instructions also contain a list
of the technical data.
Instrument documentation in the form of PDF files
The “Instrument documentation in the form of PDF files” is on the CD that is
included in the delivery.
B 70.6580.0 Operating Manual
It contains information about commissioning, operation, parameterization and
configuration on the instrument.
B 70.6580.1 Operating Instructions
The operating instructions are an extract from the operating manual and cover
the basic operation of the paperless recorder.
B 70.6580.2.0 Interface Description (serial interfaces)
This provides information on communication (RS232, RS485) with supervisory
systems.
Interface Description (Ethernet interface)
This provides information on the connection of a paperless recorder to a
company-internal network. This description is integrated into B 70.6580.2.0
B 70.6580.2.3 Interface Description (PROFIBUS-DP interface)
This provides information on the connection of a paperless recorder to a
PROFIBUS-DP system.
7
1 Introduction
B 70.6580.4 Installation Instructions
The installation instructions describe the installation of the recorder and the
connection of the supply and signal cables. The instructions also contain a list
of the technical data.
B 70.6580.6 Setup Program
The manual describes the function of the setup program. The setup program is
available as an option.
T 70.6580 Data Sheet
The data sheet contains general information, the order details and the
technical data.
B 70.9701.0 PC evaluation software (PCA3000)
The operating manual describes the operation and the features of the PC
evaluation software.
The PC evaluation software serves to visualize and evaluate process data
(measurement data, batch data, messages ...). The process data can be read
in via the CompactFlash memory card, or made available through the PCC
software.
B 70.9702.0 PCA communications software (PCC)
The operating manual describes the operation and the features of the PCA
communications software.
The PCA communications software is responsible for the data transfer from
the paperless recorder to a PC, or across a network.
H
All documents are available for downloading at www.jumo.de
hStart the product search on the home page.
hEnter 70.6580 and start the search.
hSelect the paperless recorder
hSelect the download section
hDownload the PDF file.
1 Introduction
8
1.3 Typographical conventions
Warning signs
The signs for Danger and Caution are used in this manual under the following
conditions:
V
Danger
This symbol is used when there may be danger to personnel if the
instructions are ignored or not followed correctly!
A
Caution
This symbol is used when there may be damage to equipment or data if the
instructions are ignored or not followed correctly!
E
Caution
This symbol is used where special care is required when handling
components liable to damage through electrostatic discharge.
Note signs
H
Note
This symbol is used when your special attention is drawn to a remark.
v
Reference
This symbol refers to further information in other manuals, chapters or
sections.
abc1Footnote
Footnotes are remarks that refer to specific points in the text. Footnotes
consist of two parts:
A marker in the text, and the footnote text.
The markers in the text are arranged as continuous superscript numbers.
h
Action instruction
This symbol indicates that an action to be performed is described.
The individual steps are marked by this asterisk, e.g.
hRotate control knob
hPress control knob
9
1 Introduction
Presentation modes
Program
Manager
Screen texts
Texts that are displayed in the setup program are indicated by italic script.
Edit
!
Device data
Menu items
Menu items in the setup and instrument software referred to in this manual are
shown in italics. Menu name, menu item and submenu item are separated
from each other by “!”.
1 Introduction
10
Andere Handbücher für LOGOSCREEN
2
Inhaltsverzeichnis
Andere JUMO Projektionsfläche Handbücher
Beliebte Projektionsfläche Handbücher anderer Marken
FART PRODUKT
FART PRODUKT Standard SCREEN Bedienungsanleitung
Draper
Draper E Series Handbuch
Elite Screens
Elite Screens Elite Tripod Series Bedienungsanleitung
Laarhoven
Laarhoven Companion II Bedienungsanleitung
Renogy
Renogy RMS-LFPS-US Bedienungsanleitung
Da-Lite
Da-Lite ExecutiveElectrol Bedienungsanleitung
