JUMPtec superMOPSpro Bedienungsanleitung
superMOPSpro Copyright JUMPtec Industrielle Computertechnik AG Page: 1of 93
superMOPSpro
Technical Manual
Rev. 2.2
JUMPtec
Industrielle Computertechnik AG
Brunnwiesenstraße 16
94469 Deggendorf/ Germany
PN of Manual: 96035-0003-00-0
Manual Rev.: 2.2
File: P487m222.DOC
Table of Contents
superMOPSpro Copyright JUMPtec Industrielle Computertechnik AG Page: 2of 93
Table of Contents
Table of Contents ............................................................................................................................2
User Information..............................................................................................................................4
Trademarks ...........................................................................................................................4
General .................................................................................................................................4
Warranty................................................................................................................................5
Introduction......................................................................................................................................6
superMOPSpro......................................................................................................................6
Features................................................................................................................................6
Connector Overview........................................................................................................................9
Block Diagram.......................................................................................................................9
Connector Arrangement.........................................................................................................10
Connector Tables ..................................................................................................................11
Memory and I/O Information............................................................................................................12
Memory Map .........................................................................................................................12
I/O Map .................................................................................................................................15
Interrupts...............................................................................................................................16
DMA......................................................................................................................................16
Working with the superMOPSpro ...................................................................................................17
Introduction............................................................................................................................17
Description of the RTC - CMOS-Setup Menu.........................................................................18
Description of superMOPSpro Extended Setup......................................................................24
Up-/Downgrading a SDisk DIMM Module...............................................................................27
Restrictions of SDisk Usage...................................................................................................27
Watchdog User Interface.......................................................................................................28
Peripheral Interfaces........................................................................................................................29
DC Power Connector (X3)......................................................................................................29
Keyboard, Reset, Battery, Speaker (X9).................................................................................29
Parallel Port (X6)...................................................................................................................31
Serial Ports (X7,X8)...............................................................................................................32
Floppy Connector (X4)...........................................................................................................35
IDE Connector for 2,5" Hard Disk (X10).................................................................................35
Feature Connector (X5) .........................................................................................................36
Ethernet Connector (X11) ......................................................................................................37
RS485 Option........................................................................................................................37
IRDA interface.......................................................................................................................38
I2C-Bus..................................................................................................................................38
The JIDA (JUMPtec Intelligent Device Architecture) Standard......................................................40
Network Operation...........................................................................................................................46
Overview...............................................................................................................................46
Installation.............................................................................................................................48
Diagnostics Overview............................................................................................................68
Technical Support..................................................................................................................72
Setup Utility...........................................................................................................................74
Specifications ..................................................................................................................................76
Mechanical Specifications......................................................................................................76
Physical Dimensions..............................................................................................................76
Electrical Specifications.........................................................................................................77
Environmental Specifications.................................................................................................77
PC/104-Bus Specification of superMOPS..............................................................................78
Signal Description ...........................................................................................................................81
PC/104 Overview ..................................................................................................................81
Address / Data Signal Group..................................................................................................81
Table of Contents
superMOPSpro Copyright JUMPtec Industrielle Computertechnik AG Page: 3of 93
Control Signal Group.............................................................................................................82
Special Function Signal Group...............................................................................................84
Data Conversion and Swapping.............................................................................................86
DMA Timing Specification .....................................................................................................89
Bus-Master Exchange Operation ...........................................................................................90
REFRESH* Signal Timing .....................................................................................................90
PC/104 Stack Characteristics ..........................................................................................................91
Mechanical dimensions of standard PC/104 modules ............................................................91
Self stacking system (Standard) with superMOPSpro ............................................................92
Customized System with superMOPSpro...............................................................................92
History..............................................................................................................................................93
User Information
superMOPSpro Copyright JUMPtec Industrielle Computertechnik AG Page: 4of 93
User Information
Copyright 1996 JUMPtec Industrielle Computertechnik GmbH.
In this document JUMPtec Industrielle Computertechnik GmbH will also be referred to by the short
form "JUMPtec".
The information in this document has been carefully checked and is believed to be accurate and
reliable. However, no responsibility is assumed for inaccuracies. Furthermore, JUMPtec reserves the
right to make changes to any portion of this manual to improve reliability, function or design.
JUMPtec does not assume any liability for any product or circuit described herein.
Trademarks
AT and IBM are trademarks of International Business Machines
XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corporation.
Microsoft is a registered trademark of Microsoft Corporation.
Intel is a registered trademark of Intel Corporation.
All other products and trademarks mentioned in this manual are trademarks of their respective
owners.
The reproduction, transmission or use of this document or its contents is not permitted without
expressed written authority.
Offenders will be liable for damages. All rights created by patent grant or registration of a utility model
or design, are reserved.
(C) JUMPtec GmbH 1993
General
For the circuits, descriptions and tables indicated no responsibility is assumed as far as patents or
other rights of third parties are concerned.
The information in the Technical Descriptions describes the type of the boards and shall not be
considered as assured characteristics.
The reproduction, transmission or use of this document or its contents is not permitted without
express written authority. Offenders will be liable for damages. All rights, including rights created by
patent grant or registration of a utility model or design, are reserved.
User Information
superMOPSpro Copyright JUMPtec Industrielle Computertechnik AG Page: 5of 93
Warranty
Each board is carefully and thoroughly tested before being shipped. If, however, problems should
occur during the operation, please check your user specific settings of all boards included in your
system. This is often the source of the fault. If a board is defective, it can be sent to your supplier for
repair. Please take care of the following steps:
1. The board returned should correspond to the factory default settings since a test is
only possible under this settings.
2. Upon receipt of the board, please be aware that your user specific settings could
have been changed during the repair and tests.
Within the guarantee, the repair is free as long as the guarantee conditions were kept. If no fault has
been found, you will be charged with the test cost due to the high test expenditure. Repairs outside
the guarantee period will be charged.
This JUMPtec product is warranted against defects in material and workmanship for our guaranteed
warranty period from the date of shipment. During the warranty period, JUMPtec will, at its option,
either repair or replace products which prove to be defective.
For warranty service or repair, the product must be returned to a service facility designated by
JUMPtec.
The foregoing warranty shall not apply to defects resulting from improper or inadequate maintenance
or handling by the customer, unauthorized modification or misuse, operation outside of the
environmental specifications for the product, or improper installation or maintenance.
JUMPtec will not be responsible for any defects or damages due to a faulty JUMPtec product other
than the products supplied by JUMPtec.
Introduction
superMOPSpro Copyright JUMPtec Industrielle Computertechnik AG Page: 6of 93
Introduction
superMOPSpro
The superMOPSpro integrates the complete functionality of an 80486 SX/DX motherboard with CPU,
System-BIOS, 4 Mbyte to 20MByte DRAM, keyboard-controller, real time clock and additional
peripheral functions like COM1, COM2, LPT1, floppy-interface, IDE-harddisk-interface, watchdog,
silicon disk and Ethernet access. The system runs with CPU clock speeds from 33MHz to 133MHz
(”DX5”). The superMOPSpro incorporates the following features:
Features
Supported Processors
Type Internal Clock Notes
80486SX, 33 MHz many 486 processor types are or
80486DX 33 MHz will be not be available anymore
80486DX2-66 66 MHz in the future
80486DX4-100 100 MHz
80486DX5-133 133 MHz
Memory Configurations, onboard and additional S.O.DIMM
Onboard S.O.DIMM Total
4 MB -4 MB
4 MB 4 MB 8 MB
4 MB 16 MB 20 MB
for self-upgrade only use modules with:
support of fast page mode, no EDO-DRAM
one page mode (no 8 MB modules)
DRAMs with support of CAS only refresh
5V-modules (no 3.3V types)
(refer also to JUMPtec specification X00560.DOC)
Introduction
superMOPSpro Copyright JUMPtec Industrielle Computertechnik AG Page: 7of 93
Silicon Disk as a BIOS Compatible Bootable Hard Disk
Onboard SDISK-DIMM Total
0.9 MB -0.9 MB
0.9 MB 1 MB 1.9 MB
0.9 MB 2 MB 2.9 MB
0.9 MB 4 MB 4.9 MB
0.9 MB 8 MB 8.9 MB
Serial Ports, COMA and COMB (user configurable)
Base Adresses Port Definition
220h user
228h user
238h user
2E0h user
2E8h COM4
2F8 COM2
338 user
3E8 COM3
3F8 COM1
Parallel Port, LPT uni- or bi-directional (user configurable)
Base Adresses Port Definition
278
378
3BC
Floppy-Interface
via a flat foil connector
Standard IDE-Hard Disk-Interface
via a 2mm 44 pin 2.5” hard disk connector
Watchdog
implemented in the extended BIOS
FLASH-BIOS (AMI)
Introduction
superMOPSpro Copyright JUMPtec Industrielle Computertechnik AG Page: 8of 93
Real Time Clock
Keyboard-Controller
EEPROM for CMOS-SETUP
IRDA-Support
I²C-Bus Interface
Ethernet 10BaseT (Twisted Pair)
RS485 prepared
PC/104-Format
90 * 95 mm (4,5" x 3,7") with the PC/104 Bus
5V only power supply
Full ISA electrical characteristics like timing and DC-characteristics
Low power CMOS technology with 12mA driver capacity (=half of ISA-bus)
Connector Overview
superMOPSpro Copyright JUMPtec Industrielle Computertechnik AG Page: 9of 93
Connector Overview
Block Diagram
VLSI
Chipset
Watchdog
SMC
I/O-Controller
80486SX
to
AMD 5x86
Silicon Disk
Dynamic
RAM
Keyboard
Real Time
Clock
Serial
COM A Serial
COM B Parallel
LPT Floppy
Interface Harddisk
Interface
PC/104
Bus
Ethernet
Connector Overview
superMOPSpro Copyright JUMPtec Industrielle Computertechnik AG Page: 10 of 93
Connector Arrangement
FLOPPY FEATURE
COM A
LPT
KBD
COM B
IDE
Ethernet
POWER PC/104
S.O.DIMM
The pin 1 of any connector is marked with a rectangular pad at the bottom side of the board and with
a mark of the same kind in this drawing (showing the top view of the board).
The S.O.DIMM socket for memory and BIOS compatible flash disk consists of two ”slots”. The lower
one is for upgrade of memory. The upper one is only for flash disk usage.
Inhaltsverzeichnis
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
