Juniper JSA7800 Montageanleitung

Juniper Secure Analytics 7800 Hardware

Guide

Published

2020-06-29

Juniper Networks, Inc.

1133 Innovation Way

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in

the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks

are the property of their respective owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right

to change, modify, transfer, or otherwise revise this publication without notice.

Juniper Secure Analytics 7800 Hardware Guide

The information in this document is current as of the date on the title page.

YEAR 2000 NOTICE

Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related

limitations through the year 2038. However, the NTP application is known to have some difficulty in the year 2036.

END USER LICENSE AGREEMENT

The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with)

Juniper Networks software. Use of such software is subject to the terms and conditions of the End User License Agreement

(“EULA”) posted at https://support.juniper.net/support/eula/. By downloading, installing or using such software, you

agree to the terms and conditions of that EULA.

Table of Contents

About the Documentation | vii

Documentation and Release Notes | vii

Documentation Conventions | vii

Documentation Feedback | x

Requesting Technical Support | x

Self-Help Online Tools and Resources | xi

Creating a Service Request with JTAC | xi

Overview

JSA7800 System Overview | 13

JSA7800 Appliance Description | 13

Benefits of the JSA7800 Appliance | 13

JSA7800 Appliance Transceiver Interface | 14

Field-Replaceable Units on the JSA7800 Appliance | 15

JSA7800 Chassis | 15

JSA7800 Appliance Front Panel Description | 16

JSA7800 Appliance Back Panel Description | 18

Cooling System and Airflow in a JSA7800 Device | 21

Fan Module Status | 21

Site Planning, Preparation, and Specifications

JSA7800 Site Guidelines and Requirements | 24

General Site Installation Guidelines for the JSA7800 Appliance | 24

JSA7800 Appliance Physical Specifications | 25

JSA7800 Appliance Rack Requirements | 26

Additional Hardware Requirements | 27

iii

Initial Installation and Configuration

JSA7800 Installation Overview | 30

Overview of Installing the JSA7800 Appliance in a Rack | 30

Tools and Parts Required for Installing the JSA7800 Appliance | 30

Installing the JSA7800 in a Rack | 31

Installing the JSA7800 Appliance | 31

Installing the JSA7800 Appliance Using Front-and-Rear-Mounting Flush to a Rack | 34

Connecting the JSA7800 to Power | 38

Connecting the JSA7800 Appliance to Ground | 38

Connecting the JSA7800 Appliance to a DC Power Source | 39

Connecting the JSA7800 Appliance to a Management Device | 40

Configuring the JSA7800 | 42

Configuring Basic Settings on the JSA7800 Appliance | 43

Accessing the JSA Interface | 45

Maintaining Components

Maintaining the JSA7800 RAID Array | 48

Maintaining JSA7800 Power System | 48

Maintaining the JSA7800 Power Supply | 49

Replacing an AC Power Supply on the JSA7800 Appliance | 50

Replacing AC Power Supply Cables on the JSA7800 Appliance | 50

Replacing a DC Power Supply on the JSA7800 Appliance | 51

Replacing DC Power Supply Cables on the JSA7800 Appliance | 52

Troubleshooting Hardware

Contacting Juniper Networks Technical Assistance Center | 55

Safety and Compliance Information

Definitions of Safety Warning Levels | 58

General Safety Guidelines and Warnings | 61

Restricted Access Warning | 63

Qualified Personnel Warning | 66

Prevention of Electrostatic Discharge Damage | 66

Warning Statement for Norway and Sweden | 68

Fire Safety Requirements | 68

Fire Suppression | 68

Fire Suppression Equipment | 68

Installation Instructions Warning | 70

Chassis Lifting Guidelines for the JSA7800 Appliance | 70

Ramp Warning | 71

Rack-Mounting and Cabinet-Mounting Warnings | 72

Grounded Equipment Warning | 78

Laser and LED Safety Guidelines and Warnings | 78

General Laser Safety Guidelines | 79

Class 1 Laser Product Warning | 80

Class 1 LED Product Warning | 81

Laser Beam Warning | 82

Radiation from Open Port Apertures Warning | 83

Maintenance and Operational Safety Guidelines and Warnings | 84

Battery Handling Warning | 85

Jewelry Removal Warning | 86

Lightning Activity Warning | 88

Operating Temperature Warning | 89

Product Disposal Warning | 91

Action to Take After an Electrical Accident | 92

General Electrical Safety Guidelines and Warnings | 92

AC Power Electrical Safety Guidelines | 93

AC Power Disconnection Warning | 95

DC Power Electrical Safety Guidelines | 96

DC Power Disconnection Warning | 98

DC Power Grounding Requirements and Warning | 100

DC Power Wiring Sequence Warning | 102

Multiple Power Supplies Disconnection Warning | 105

TN Power Warning | 106

Agency Approvals for the JSA7800 Appliance | 106

Compliance Statements for EMC Requirements for the JSA7800 Appliance | 107

Canada | 108

European Community | 108

Japan | 109

Korea | 109

United States | 109

FCC Part 15 Statement | 110

Compliance Statements for Acoustic Noise for the JSA7800 Appliance | 110

About the Documentation

IN THIS SECTION

Documentation and Release Notes | vii

Documentation Conventions | vii

Documentation Feedback | x

Requesting Technical Support | x

Use this guide to install hardware and perform initial software configuration, routine maintenance, and

troubleshooting for JSA7800.

After completing the installation and basic configuration procedures covered in this guide, refer to the

JSA software documentation for information about further software configuration. See Juniper Secure

Analytics.

Documentation and Release Notes

To obtain the most current version of all Juniper Networks®technical documentation, see the product

documentation page on the Juniper Networks website at https://www.juniper.net/documentation/.

If the information in the latest release notes differs from the information in the documentation, follow the

product Release Notes.

Juniper Networks Books publishes books by Juniper Networks engineers and subject matter experts.

These books go beyond the technical documentation to explore the nuances of network architecture,

deployment, and administration. The current list can be viewed at https://www.juniper.net/books.

Documentation Conventions

Table 1 on page viii defines notice icons used in this guide.

vii

Table 1: Notice Icons

DescriptionMeaningIcon

Indicates important features or instructions.Informational note

Indicates a situation that might result in loss of data or hardware

damage.

Caution

Alerts you to the risk of personal injury or death.Warning

Alerts you to the risk of personal injury from a laser.Laser warning

Indicates helpful information.Tip

Alerts you to a recommended use or implementation.Best practice

Table 2 on page viii defines the text and syntax conventions used in this guide.

Table 2: Text and Syntax Conventions

ExamplesDescriptionConvention

To enter configuration mode, type

the configure command:

user@host> configure

Represents text that you type.Bold text like this

user@host> show chassis alarms

No alarms currently active

Represents output that appears on

the terminal screen.

Fixed-width text like this

•A policy term is a named structure

that defines match conditions and

actions.

•Junos OS CLI User Guide

•RFC 1997, BGP Communities

Attribute

•Introduces or emphasizes important

new terms.

•Identifies guide names.

•Identifies RFC and Internet draft

titles.

Italic text like this

viii

Table 2: Text and Syntax Conventions (continued)

ExamplesDescriptionConvention

Configure the machine’s domain

name:

[edit]

root@# set system domain-name

domain-name

Represents variables (options for

which you substitute a value) in

commands or configuration

statements.

Italic text like this

•To configure a stub area, include

the stub statement at the [edit

protocols ospf area area-id]

hierarchy level.

•The console port is labeled

CONSOLE.

Represents names of configuration

statements, commands, files, and

directories; configuration hierarchy

levels; or labels on routing platform

components.

Text like this

stub <default-metric metric>;Encloses optional keywords or

variables.

< > (angle brackets)

broadcast | multicast

(string1 |string2 |string3)

Indicates a choice between the

mutually exclusive keywords or

variables on either side of the symbol.

The set of choices is often enclosed

in parentheses for clarity.

| (pipe symbol)

rsvp { # Required for dynamic MPLS

only

Indicates a comment specified on the

same line as the configuration

statement to which it applies.

# (pound sign)

community name members [

community-ids ]

Encloses a variable for which you can

substitute one or more values.

[ ] (square brackets)

[edit]

routing-options {

static {

route default {

nexthop address;

retain;

}

Identifies a level in the configuration

hierarchy.

Indention and braces ( { } )

Identifies a leaf statement at a

configuration hierarchy level.

; (semicolon)

GUI Conventions

Table 2: Text and Syntax Conventions (continued)

ExamplesDescriptionConvention

•In the Logical Interfaces box, select

All Interfaces.

•To cancel the configuration, click

Cancel.

Represents graphical user interface

(GUI) items you click or select.

Bold text like this

In the configuration editor hierarchy,

select Protocols>Ospf.

Separates levels in a hierarchy of

menu selections.

>(bold right angle bracket)

Documentation Feedback

We encourage you to provide feedback so that we can improve our documentation. You can use either

of the following methods:

•Online feedback system—Click TechLibrary Feedback, on the lower right of any page on the Juniper

Networks TechLibrary site, and do one of the following:

•Click the thumbs-up icon if the information on the page was helpful to you.

•Click the thumbs-down icon if the information on the page was not helpful to you or if you have

suggestions for improvement, and use the pop-up form to provide feedback.

•E-mail—Send your comments to [email protected]. Include the document or topic name,

URL or page number, and software version (if applicable).

Requesting Technical Support

Technical product support is available through the Juniper Networks Technical Assistance Center (JTAC).

If you are a customer with an active Juniper Care or Partner Support Services support contract, or are

Andere Handbücher für JSA7800

Inhaltsverzeichnis

Andere Juniper Firewall Handbücher

Juniper

Juniper NetScreen-50 Montageanleitung

Juniper

Juniper JSA7800 Einrichtungshandbuch

Juniper

Juniper NetScreen-50 Bedienungsanleitung

Juniper

Juniper NETSCREEN-200 SERIES Montageanleitung

Juniper

Juniper NetScreen-25 Bedienungsanleitung

Juniper

Juniper NetScreen-5GT Wireless Bedienungsanleitung

Juniper

Juniper NS-5400-P00A-S00 Bedienungsanleitung

Juniper

Juniper SRX5600 Bedienungsanleitung

Juniper

Juniper NetScreen-204 Bedienungsanleitung

Juniper

Juniper JATP400 Einrichtungshandbuch

Juniper

Juniper NETSCREEN-5XT Bedienungsanleitung

Juniper

Juniper Advanced Threat Prevention Appliance Installationshandbuch

Juniper

Juniper JATP700 Einrichtungshandbuch

Juniper

Juniper JSA3500 Bedienungsanleitung

Juniper

Juniper NetScreen-5GT Wireless Bedienungsanleitung

Juniper

Juniper NetScreen-5000 Series Bedienerhandbuch

Beliebte Firewall Handbücher anderer Marken

Cisco

Cisco S190 Bedienungsanleitung

Fortinet

Fortinet FortiGate Voice Series Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 2300 Bedienungsanleitung

SecureLogix

SecureLogix ETM System Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVX538 Bedienungsanleitung

Lanner

Lanner FW-8877 Bedienungsanleitung

Huawei

Huawei USG6000 Series Installations- und Betriebshandbuch

H3C

H3C SecPath F5000-AI-15 Bedienungsanleitung

Nexcom

Nexcom DNA 1150 Bedienungsanleitung

Fortinet

Fortinet FortiGate-60 series Bedienungsanleitung

Cisco

Cisco 3110 Handbuch

Draytek

Draytek Vigor2860 Series Bedienungsanleitung

Lanner electronics

Lanner electronics FW-7650 Series Bedienungsanleitung

Swisscom

Swisscom Internet Backup Bedienungsanleitung

SonicWALL

SonicWALL NSa 5700 Bedienungsanleitung

DPtech

DPtech FW1000 SERIES Bedienungsanleitung

FEITIAN

FEITIAN MultiPass FIDO Bedienungsanleitung

EBLOCKER

EBLOCKER PRO Bedienungsanleitung