Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M... Installationshandbuch

JUNOSe™Software

for E Series™Broadband Services Routers

Command Reference A to M

Release 11.0.x

Juniper Networks, Inc.

1194 North Mathilda Avenue

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Published: 2010-01-11

Juniper Networks, the Juniper Networks logo, JUNOS, NetScreen, ScreenOS, and Steel-Belted Radius are registered trademarks of Juniper Networks, Inc. in

the United States and other countries. JUNOSe is a trademark of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or

registered service marks are the property of their respective owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or

otherwise revise this publication without notice.

Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed

to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347,

6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.

JUNOSe™Software for E Series™Broadband Services Routers Command Reference Guide A to M

Release 11.0.x

Writing: Subash Babu Asokan, Krupa Chandrashekar, Megha Shaseendran, Mark Barnard, Diane Florio, Bruce Gillham, Sarah Lesway-Ball, Brian Wesley

Simmons, Fran Singer, Chander Aima, Poornima Goswami, Hema Priya J, Sairam Venugopalan

Editing: Benjamin Mann

Illustration: Nathaniel Woodward

Cover Design: Edmonds Design

Revision History

January 2010—FRS JUNOSe 11.0.x

The information in this document is current as of the date listed in the revision history.

YEAR 2000 NOTICE

Juniper Networks hardware and software products are Year 2000 compliant. The JUNOS Software has no known time-related limitations through the year

2038. However, the NTP application is known to have some difficulty in the year 2036.

ii ■

END USER LICENSE AGREEMENT

READ THIS END USER LICENSE AGREEMENT (“AGREEMENT”) BEFORE DOWNLOADING, INSTALLING, OR USING THE SOFTWARE. BY DOWNLOADING,

INSTALLING, OR USING THE SOFTWARE OR OTHERWISE EXPRESSING YOUR AGREEMENT TO THE TERMS CONTAINED HEREIN, YOU (AS CUSTOMER

OR IF YOU ARE NOT THE CUSTOMER, AS A REPRESENTATIVE/AGENT AUTHORIZED TO BIND THE CUSTOMER) CONSENT TO BE BOUND BY THIS

AGREEMENT. IF YOU DO NOT OR CANNOT AGREE TO THE TERMS CONTAINED HEREIN, THEN (A) DO NOT DOWNLOAD, INSTALL, OR USE THE SOFTWARE,

AND (B) YOU MAY CONTACT JUNIPER NETWORKS REGARDING LICENSE TERMS.

1. The Parties. The parties to this Agreement are (i) Juniper Networks, Inc. (if the Customer’s principal office is located in the Americas) or Juniper Networks

(Cayman) Limited (if the Customer’s principal office is located outside the Americas) (such applicable entity being referred to herein as “Juniper”), and (ii)

the person or organization that originally purchased from Juniper or an authorized Juniper reseller the applicable license(s) for use of the Software (“Customer”)

(collectively, the “Parties”).

2. The Software. In this Agreement, “Software”means the program modules and features of the Juniper or Juniper-supplied software, for which Customer

has paid the applicable license or support fees to Juniper or an authorized Juniper reseller, or which was embedded by Juniper in equipment which Customer

purchased from Juniper or an authorized Juniper reseller. “Software”also includes updates, upgrades and new releases of such software. “Embedded

Software”means Software which Juniper has embedded in or loaded onto the Juniper equipment and any updates, upgrades, additions or replacements

which are subsequently embedded in or loaded onto the equipment.

3. License Grant. Subject to payment of the applicable fees and the limitations and restrictions set forth herein, Juniper grants to Customer a non-exclusive

and non-transferable license, without right to sublicense, to use the Software, in executable form only, subject to the following use restrictions:

a. Customer shall use Embedded Software solely as embedded in, and for execution on, Juniper equipment originally purchased by Customer from Juniper

or an authorized Juniper reseller.

b. Customer shall use the Software on a single hardware chassis having a single processing unit, or as many chassis or processing units for which Customer

has paid the applicable license fees; provided, however, with respect to the Steel-Belted Radius or Odyssey Access Client software only, Customer shall use

such Software on a single computer containing a single physical random access memory space and containing any number of processors. Use of the

Steel-Belted Radius or IMS AAA software on multiple computers or virtual machines (e.g., Solaris zones) requires multiple licenses, regardless of whether

such computers or virtualizations are physically contained on a single chassis.

c. Product purchase documents, paper or electronic user documentation, and/or the particular licenses purchased by Customer may specify limits to

Customer’s use of the Software. Such limits may restrict use to a maximum number of seats, registered endpoints, concurrent users, sessions, calls,

connections, subscribers, clusters, nodes, realms, devices, links, ports or transactions, or require the purchase of separate licenses to use particular features,

functionalities, services, applications, operations, or capabilities, or provide throughput, performance, configuration, bandwidth, interface, processing,

temporal, or geographical limits. In addition, such limits may restrict the use of the Software to managing certain kinds of networks or require the Software

to be used only in conjunction with other specific Software. Customer’s use of the Software shall be subject to all such limitations and purchase of all applicable

licenses.

d. For any trial copy of the Software, Customer’s right to use the Software expires 30 days after download, installation or use of the Software. Customer

may operate the Software after the 30-day trial period only if Customer pays for a license to do so. Customer may not extend or create an additional trial

period by re-installing the Software after the 30-day trial period.

e. The Global Enterprise Edition of the Steel-Belted Radius software may be used by Customer only to manage access to Customer’s enterprise network.

Specifically, service provider customers are expressly prohibited from using the Global Enterprise Edition of the Steel-Belted Radius software to support any

commercial network access services.

The foregoing license is not transferable or assignable by Customer. No license is granted herein to any user who did not originally purchase the applicable

license(s) for the Software from Juniper or an authorized Juniper reseller.

4. Use Prohibitions. Notwithstanding the foregoing, the license provided herein does not permit the Customer to, and Customer agrees not to and shall

not: (a) modify, unbundle, reverse engineer, or create derivative works based on the Software; (b) make unauthorized copies of the Software (except as

necessary for backup purposes); (c) rent, sell, transfer, or grant any rights in and to any copy of the Software, in any form, to any third party; (d) remove

any proprietary notices, labels, or marks on or in any copy of the Software or any product in which the Software is embedded; (e) distribute any copy of

the Software to any third party, including as may be embedded in Juniper equipment sold in the secondhand market; (f) use any ‘locked’or key-restricted

feature, function, service, application, operation, or capability without first purchasing the applicable license(s) and obtaining a valid key from Juniper, even

if such feature, function, service, application, operation, or capability is enabled without a key; (g) distribute any key for the Software provided by Juniper

to any third party; (h) use the Software in any manner that extends or is broader than the uses purchased by Customer from Juniper or an authorized Juniper

reseller; (i) use Embedded Software on non-Juniper equipment; (j) use Embedded Software (or make it available for use) on Juniper equipment that the

Customer did not originally purchase from Juniper or an authorized Juniper reseller; (k) disclose the results of testing or benchmarking of the Software to

any third party without the prior written consent of Juniper; or (l) use the Software in any manner other than as expressly provided herein.

5. Audit. Customer shall maintain accurate records as necessary to verify compliance with this Agreement. Upon request by Juniper, Customer shall furnish

such records to Juniper and certify its compliance with this Agreement.

■iii

6. Confidentiality. The Parties agree that aspects of the Software and associated documentation are the confidential property of Juniper. As such, Customer

shall exercise all reasonable commercial efforts to maintain the Software and associated documentation in confidence, which at a minimum includes

restricting access to the Software to Customer employees and contractors having a need to use the Software for Customer’s internal business purposes.

7. Ownership. Juniper and Juniper’s licensors, respectively, retain ownership of all right, title, and interest (including copyright) in and to the Software,

associated documentation, and all copies of the Software. Nothing in this Agreement constitutes a transfer or conveyance of any right, title, or interest in

the Software or associated documentation, or a sale of the Software, associated documentation, or copies of the Software.

8. Warranty, Limitation of Liability, Disclaimer of Warranty. The warranty applicable to the Software shall be as set forth in the warranty statement that

accompanies the Software (the “Warranty Statement”). Nothing in this Agreement shall give rise to any obligation to support the Software. Support services

may be purchased separately. Any such support shall be governed by a separate, written support services agreement. TO THE MAXIMUM EXTENT PERMITTED

BY LAW, JUNIPER SHALL NOT BE LIABLE FOR ANY LOST PROFITS, LOSS OF DATA, OR COSTS OR PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES,

OR FOR ANY SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, THE SOFTWARE, OR ANY JUNIPER OR

JUNIPER-SUPPLIED SOFTWARE. IN NO EVENT SHALL JUNIPER BE LIABLE FOR DAMAGES ARISING FROM UNAUTHORIZED OR IMPROPER USE OF ANY

JUNIPER OR JUNIPER-SUPPLIED SOFTWARE. EXCEPT AS EXPRESSLY PROVIDED IN THE WARRANTY STATEMENT TO THE EXTENT PERMITTED BY LAW,

JUNIPER DISCLAIMS ANY AND ALL WARRANTIES IN AND TO THE SOFTWARE (WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE), INCLUDING

ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. IN NO EVENT DOES JUNIPER

WARRANT THAT THE SOFTWARE, OR ANY EQUIPMENT OR NETWORK RUNNING THE SOFTWARE, WILL OPERATE WITHOUT ERROR OR INTERRUPTION,

OR WILL BE FREE OF VULNERABILITY TO INTRUSION OR ATTACK. In no event shall Juniper’s or its suppliers’or licensors’liability to Customer, whether

in contract, tort (including negligence), breach of warranty, or otherwise, exceed the price paid by Customer for the Software that gave rise to the claim, or

if the Software is embedded in another Juniper product, the price paid by Customer for such other product. Customer acknowledges and agrees that Juniper

has set its prices and entered into this Agreement in reliance upon the disclaimers of warranty and the limitations of liability set forth herein, that the same

reflect an allocation of risk between the Parties (including the risk that a contract remedy may fail of its essential purpose and cause consequential loss),

and that the same form an essential basis of the bargain between the Parties.

9. Termination. Any breach of this Agreement or failure by Customer to pay any applicable fees due shall result in automatic termination of the license

granted herein. Upon such termination, Customer shall destroy or return to Juniper all copies of the Software and related documentation in Customer’s

possession or control.

10. Taxes. All license fees payable under this agreement are exclusive of tax. Customer shall be responsible for paying Taxes arising from the purchase of

the license, or importation or use of the Software. If applicable, valid exemption documentation for each taxing jurisdiction shall be provided to Juniper prior

to invoicing, and Customer shall promptly notify Juniper if their exemption is revoked or modified. All payments made by Customer shall be net of any

applicable withholding tax. Customer will provide reasonable assistance to Juniper in connection with such withholding taxes by promptly: providing Juniper

with valid tax receipts and other required documentation showing Customer’s payment of any withholding taxes; completing appropriate applications that

would reduce the amount of withholding tax to be paid; and notifying and assisting Juniper in any audit or tax proceeding related to transactions hereunder.

Customer shall comply with all applicable tax laws and regulations, and Customer will promptly pay or reimburse Juniper for all costs and damages related

to any liability incurred by Juniper as a result of Customer’s non-compliance or delay with its responsibilities herein. Customer’s obligations under this

Section shall survive termination or expiration of this Agreement.

11. Export. Customer agrees to comply with all applicable export laws and restrictions and regulations of any United States and any applicable foreign

agency or authority, and not to export or re-export the Software or any direct product thereof in violation of any such restrictions, laws or regulations, or

without all necessary approvals. Customer shall be liable for any such violations. The version of the Software supplied to Customer may contain encryption

or other capabilities restricting Customer’s ability to export the Software without an export license.

12. Commercial Computer Software. The Software is “commercial computer software”and is provided with restricted rights. Use, duplication, or disclosure

by the United States government is subject to restrictions set forth in this Agreement and as provided in DFARS 227.7201 through 227.7202-4, FAR 12.212,

FAR 27.405(b)(2), FAR 52.227-19, or FAR 52.227-14(ALT III) as applicable.

13. Interface Information. To the extent required by applicable law, and at Customer's written request, Juniper shall provide Customer with the interface

information needed to achieve interoperability between the Software and another independently created program, on payment of applicable fee, if any.

Customer shall observe strict obligations of confidentiality with respect to such information and shall use such information in compliance with any applicable

terms and conditions upon which Juniper makes such information available.

14. Third Party Software. Any licensor of Juniper whose software is embedded in the Software and any supplier of Juniper whose products or technology

are embedded in (or services are accessed by) the Software shall be a third party beneficiary with respect to this Agreement, and such licensor or vendor

shall have the right to enforce this Agreement in its own name as if it were Juniper. In addition, certain third party software may be provided with the

Software and is subject to the accompanying license(s), if any, of its respective owner(s). To the extent portions of the Software are distributed under and

subject to open source licenses obligating Juniper to make the source code for such portions publicly available (such as the GNU General Public License

(“GPL”) or the GNU Library General Public License (“LGPL”)), Juniper will make such source code portions (including Juniper modifications, as appropriate)

available upon request for a period of up to three years from the date of distribution. Such request can be made in writing to Juniper Networks, Inc., 1194

N. Mathilda Ave., Sunnyvale, CA 94089, ATTN: General Counsel. You may obtain a copy of the GPL at http://www.gnu.org/licenses/gpl.html, and

a copy of the LGPL at http://www.gnu.org/licenses/lgpl.html.

15. Miscellaneous. This Agreement shall be governed by the laws of the State of California without reference to its conflicts of laws principles. The provisions

of the U.N. Convention for the International Sale of Goods shall not apply to this Agreement. For any disputes arising under this Agreement, the Parties

hereby consent to the personal and exclusive jurisdiction of, and venue in, the state and federal courts within Santa Clara County, California. This Agreement

constitutes the entire and sole agreement between Juniper and the Customer with respect to the Software, and supersedes all prior and contemporaneous

iv ■

agreements relating to the Software, whether oral or written (including any inconsistent terms contained in a purchase order), except that the terms of a

separate written agreement executed by an authorized Juniper representative and Customer shall govern to the extent such terms are inconsistent or conflict

with terms contained herein. No modification to this Agreement nor any waiver of any rights hereunder shall be effective unless expressly assented to in

writing by the party to be charged. If any portion of this Agreement is held invalid, the Parties agree that such invalidity shall not affect the validity of the

remainder of this Agreement. This Agreement and associated documentation has been written in the English language, and the Parties agree that the English

version will govern. (For Canada: Les parties aux présentés confirment leur volonté que cette convention de même que tous les documents y compris tout

avis qui s'y rattaché, soient redigés en langue anglaise. (Translation: The parties confirm that this Agreement and all related documentation is and will be

in the English language)).

■v

vi ■

Abbreviated Table of Contents

About the Documentation xxxix

Part 1 Commands, A to M

Chapter 1 Command Reference Topics 3

Chapter 2 A Commands 21

Chapter 3 B Commands 211

Chapter 4 C Commands 347

Chapter 5 D Commands 473

Chapter 6 E Commands 553

Chapter 7 F Commands 607

Chapter 8 G Commands 645

Chapter 9 H Commands 661

Chapter 10 I Commands 677

Chapter 11 K Commands 1127

Chapter 12 L Commands 1131

Chapter 13 M Commands 1243

Part 2 Index

Index 1425

Abbreviated Table of Contents ■vii

viii ■

JUNOSe 11.0.x Command Reference Guide A to M

Table of Contents

About the Documentation xxxix

E Series and JUNOSe Documentation and Release Notes ..........................xxxix

Audience ..................................................................................................xxxix

E Series and JUNOSe Text and Syntax Conventions ..................................xxxix

Obtaining Documentation .............................................................................xli

Documentation Feedback ..............................................................................xli

Requesting Technical Support ........................................................................xli

Self-Help Online Tools and Resources ....................................................xlii

Opening a Case with JTAC ......................................................................xlii

Part 1 Commands, A to M

Chapter 1 Command Reference Topics 3

Using the no Version Versus the default Version of Commands ......................3

Deprecated Commands ...................................................................................4

Filtering show Commands ...............................................................................4

Interface Types and Specifiers .........................................................................5

Chapter 2 A Commands 21

aaa accounting acct-stop on-aaa-failure .........................................................22

aaa accounting acct-stop on-access-deny .......................................................23

aaa accounting broadcast ..............................................................................24

aaa accounting commands ............................................................................25

aaa accounting default ..................................................................................26

aaa accounting duplication ............................................................................27

aaa accounting exec ......................................................................................28

aaa accounting immediate-update .................................................................29

aaa accounting interval .................................................................................30

aaa accounting statistics ................................................................................31

aaa accounting suppress null-username ........................................................32

aaa accounting vr-group ................................................................................33

aaa authentication default .............................................................................34

aaa authentication enable default ..................................................................35

aaa authentication login ................................................................................36

aaa authorization ...........................................................................................37

aaa authorization config-commands ..............................................................38

Table of Contents ■ix

aaa delimiter .................................................................................................39

aaa dhcpv6-delegated-prefix delegated-ipv6-prefix ........................................40

aaa dns ..........................................................................................................41

aaa domain-map ...........................................................................................42

aaa duplicate-address-check ..........................................................................43

aaa intf-desc-format include ..........................................................................44

aaa ipv6-dns ..................................................................................................45

aaa ipv6-nd-ra-prefix framed-ipv6-prefix .......................................................46

aaa local database .........................................................................................47

aaa local select database ...............................................................................48

aaa local username ........................................................................................49

aaa new-model ..............................................................................................50

aaa parse-direction ........................................................................................51

aaa parse-order .............................................................................................52

aaa profile .....................................................................................................53

aaa qos downstream-rate ..............................................................................54

aaa route-download .......................................................................................55

aaa route-download now ...............................................................................56

aaa route-download suspend .........................................................................57

aaa service accounting interval ......................................................................58

aaa subscriber limit per-port .........................................................................59

aaa subscriber limit per-vr .............................................................................60

aaa timeout ...................................................................................................61

aaa tunnel assignment-id-format ...................................................................62

aaa tunnel calling-number-format .................................................................63

aaa tunnel calling-number-format-fallback ....................................................66

aaa tunnel client-name ..................................................................................68

aaa tunnel-group ...........................................................................................69

aaa tunnel ignore ..........................................................................................70

aaa tunnel nas-port-method ..........................................................................71

aaa tunnel password .....................................................................................72

aaa tunnel switch-profile ...............................................................................73

aaa tunnel tx-connect-speed-method .............................................................74

aaa user accounting interval ..........................................................................75

aaa virtual-router ...........................................................................................76

aaa wins ........................................................................................................77

access-class in ...............................................................................................78

access-list ......................................................................................................79

accounting .....................................................................................................80

adapter accept ...............................................................................................81

adapter disable ..............................................................................................82

adapter enable ..............................................................................................83

adapter erase ................................................................................................84

address ..........................................................................................................85

address area ..................................................................................................86

address authentication key ............................................................................87

address authentication-key ............................................................................88

address authentication message-digest ..........................................................89

address authentication mode ........................................................................90

address authentication-none .........................................................................91

address bfd-liveness-detection .......................................................................92

x■Table of Contents

JUNOSe 11.0.x Command Reference Guide A to M

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Juniper Software Handbücher

Juniper

Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CATEGORY OFFENSE INVESTIGATION GUIDE REV... Bedienungsanleitung

Juniper

Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1 Bedienungsanleitung

Juniper

Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV... Bedienungsanleitung

Juniper

Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - MULTICAST ROUTING CONFIGURATION GUIDE... Bedienungsanleitung

Juniper

Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV... Bedienungsanleitung

Juniper

Juniper JUNOSE 11.2.X IP SERVICES Bedienungsanleitung

Juniper

Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M... Installationshandbuch

Juniper

Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE... Bedienungsanleitung

Juniper

Juniper JUNOS SPACE 2.0 - RELEASE NOTES Bedienungsanleitung

Juniper

Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CATEGORY OFFENSE INVESTIGATION GUIDE REV... Bedienungsanleitung

Juniper

Juniper JUNIPER CARE SERVICES Bedienungsanleitung

Juniper

Juniper JUNOS SPACE SDK Installationsanleitung

Juniper

Juniper JUNOSE SOFTWARE 10.3.2 - S 9-29-2010 Bedienungsanleitung

Juniper

Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION... Bedienungsanleitung

Juniper

Juniper JUNOS PULSE 2.0 RELEASE NOTES Bedienungsanleitung

Juniper

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE... Bedienungsanleitung

Juniper

Juniper JUNOSE 11.1.X MULTICAST ROUTING Bedienungsanleitung

Juniper

Juniper CARE PLUS Bedienungsanleitung

Juniper

Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M... Installationshandbuch

Juniper

Juniper IDP OS 5.1R1 - S REV 1 Bedienungsanleitung

Juniper

Juniper SECURITY THREAT RESPONSE MANAGER - APPLICATION CONFIGURATION GUIDE REV... Bedienungsanleitung

Juniper

Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CATEGORY OFFENSE INVESTIGATION GUIDE REV... Bedienungsanleitung

Juniper

Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Bedienungsanleitung

Juniper

Juniper JUNOSE 10.3.1 - S 3-19-2010 Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung