Juniper EX Series Bedienungsanleitung

Andere Handbücher für EX Series

15

Dieses Handbuch passt für folgende Modelle

1

Andere Juniper Schalten Handbücher

Juniper

Juniper EX4650 Series Montageanleitung

Juniper

Juniper EX2200 Series Bedienungsanleitung

Juniper

Juniper EX8208 Bedienungsanleitung

Juniper

Juniper EX2200 Series Bedienungsanleitung

Juniper

Juniper QFX3600 Bedienerhandbuch

Juniper

Juniper QFX10002 Montageanleitung

Juniper

Juniper QFX5210 Bedienungsanleitung

Juniper

Juniper EX8208 Bedienungsanleitung

Juniper

Juniper EX4600 Bedienungsanleitung

Juniper

Juniper EX2200 Series Bedienungsanleitung

Juniper

Juniper QFX10008 Bedienungsanleitung

Juniper

Juniper QFX5100-48T Bedienungsanleitung

Juniper

Juniper QFX3600 Bedienerhandbuch

Juniper

Juniper EX3200 Series Bedienungsanleitung

Juniper

Juniper EX4200 Series Bedienungs- und Sicherheitshinweise

Juniper

Juniper EX2500 Bedienungsanleitung

Juniper

Juniper NFX350 Montageanleitung

Juniper

Juniper EX Series Bedienungsanleitung

Juniper

Juniper EX8200 Series Bedienungsanleitung

Juniper

Juniper EX9200 Series Installationsanleitung

Juniper

Juniper EX8200 Series Bedienungsanleitung

Juniper

Juniper EX8208 Bedienungsanleitung

Juniper

Juniper EX4500 Series Montageanleitung

Juniper

Juniper EX3300 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Removing an EX8208 Switch from a Rack or Cabinet Using a Mechanical Lift

Because of the switch's size and weight, we strongly recommend using a mechanical

lift to remove the switch. For instructions on removing a switch without using a

mechanical lift, see Removing an EX8208 Switch from a Rack or Cabinet Without

Using a Mechanical Lift.

Before you remove the switch using a lift:

■Ensure that the rack or cabinet is stable and secured to the building.

■Ensure that there is enough space to place the removed switch in its new location

and along the path to the new location.

■Read General Safety Guidelines and Warnings for EX Series Switches, with

particular attention to Chassis Lifting Guidelines for EX8200 Switches.

■Ensure that the switch has been safely powered off (see Powering Off an EX8200

Switch) and that you have unplugged (disconnected) the power cords to the

power supplies.

■Ensure that you have disconnected any cables or wires attached to the switch

ports.

CAUTION: When removing more than one switch from a rack or cabinet, remove

the switch in the top of the rack or cabinet first and proceed to remove the rest of

the switches from top to bottom.

Ensure that you have the following parts and tools available to remove the switch:

■A mechanical lift

■A Phillips (+) screwdriver, number 2 or number 3, depending on the size of

your rack mounting screws

To remove the switch using a lift (see Figure 1):

1. Use the appropriate Phillips (+) screwdriver to remove the 24 mounting screws

that attach the chassis front-mounting brackets to the rack or cabinet.

2. Move the lift to the rack and position it so that its platform is centered about 0.5

in. (1.27 cm) below the bottom of the switch chassis and as close to it as possible.

3. Carefully slide the switch from the adjustable mounting brackets attached to the

rack onto the lift.

4. Use the lift to transport the switch to its new location.

Removing an EX8208 Switch from a Rack or Cabinet Using a Mechanical Lift ■1

Figure 1: Removing an EX8208 Switch Chassis Using a Mechanical Lift

Related Topics ■Removing an EX8208 Switch from a Rack or Cabinet Without Using a Mechanical

Lift

Published: 2009-07-15

2■Removing an EX8208 Switch from a Rack or Cabinet Using a Mechanical Lift