Just Wireless BTK-729 Bedienungsanleitung

Bluetooth®headset

users Manual

BTK-729

Thank you for purchasing the Just Wireless Bluetooth® Headset. We hope you enjoy it. This manual

will get you started and help you to get familiar with the features of your headset. For those individuals

with the Bluetooth® Headset, in addition to all the other features, the unit supports a multipoint func-

tion to allow simultaneous connection of the Bluetooth® Headset with 2 mobile phones.

About your Just Wireless bluetooth heAdset

Your Just Wireless® Bluetooth® Headset lets you do the following functions, provided your mobile

phone can support it:

•Making a call

•Ending a call

•Answering calls

•Adjusting Volume

•Voice Command Dialing

•Redialing last number

•Placing a call on hold

•Call Waiting

•Rejecting a call

INTRODUCTION

BEFORE YOU BEGIN TO USE YOUR JUST WIRELESS®

BLUETOOTH®HEADSET, YOU MUST FULLY CHARGE AND PAIR

IT WITH YOUR MOBILE PHONE. PLEASE READ THE ENCLOSED

USERS MANUAL FOR EASY PAIRING INSTRUCTIONS.

SHOULD YOU NEED ASSISTANCE, PLEASE CALL 888-753-6957.

STOP

AND

READ

2 3

FEATURE DIAGRAM

1LED Indicator Light

a) Blue mode indicates active/standby.

•1 Flash every 5 seconds: Your Bluetooth®

Headset is not connected to your mobile

phone.

•1 Flash every 7 seconds: Your Bluetooth®

Headset is connected to your mobile phone.

b) Red mode indicates battery level.

•Flashing Red - Indicates low battery level.

•Solid Red - Indicates your Bluetooth®

Headset is being charged.

•

Solid Blue - The battery is fully charged.

c) Blue/Red Flashing Mode

•Your Bluetooth® Headset is in pairing

mode

Main Button

Volume Higher/Lower

4 Charging Port

5 Microphone

6Adjustable Ear Hook

6 Earphone

Adjustable

Ear Hook

Main Button

Microphone

Charging

Port

Volume

Higher/Lower

Earphone

LED Indicator

4 5

ChArging your heAdset

Your Just Wireless® Bluetooth® Headset comes with a built in rechargeable battery, and must be

fully charged before using. Use the supplied USB Cable to charge your headset by plugging it into the

charging jack shown below.

•The red LED light will ﬂash

when you have a low battery

level. It is suggested to

charge the headset at this time.

•The red light will illuminate solid red during charging and will turn solid blue

when fully charged. It will take approximately 1-2 hours to charge.

•Your headset cannot be used while charging.

turning the heAdset on And oFF

ON Mode: Press and hold down the Main Button for 3 seconds. Your headset will beep and the blue

LED light will ﬂash 4 times. Now your headset is on.

OFF Mode: Press and hold down the Main Button for 4 seconds. You headset will beep and the red

LED light will ﬂash 2 times. Now your headset is off.

Standby Mode: To save battery power, your headset will automatically change to standby mode

when not in use. The blue LED light will ﬂash every 7 seconds. The headset will automatically change

back to ON mode, when a call is incoming, or when the Main Button is pressed.

GETTING STARTED

6 7

PAiring And ConneCting your heAdset to your mobile Phone

Pairing is a process of linking the Bluetooth® Headset with your mobile phone. Before using your

Bluetooth® Headset, you must successfully pair it to your mobile phone. Your mobile phone must be

Bluetooth® compatible. If it is not, you will not be able to pair the headset to your mobile phone. Check the

users manual of your mobile phone to see if it is Bluetooth® compatible. Your mobile phone and headset

should not be more than 3 feet in distance when pairing.

Step 1 - Setting the headset into pairing mode: In the OFF mode, press and hold down the Main

Button for 9 seconds, until you see the LED light consecutively ﬂashing blue and red. Your Bluetooth®

Headset is now in pairing mode.

Step 2 - Setting the mobile phone into pairing or “discover” mode: Follow your mobile phone’s

instruction manual. Although it is different on all types of mobile phone brands and models, it usually

involves going to the “set up”, “connect” or “Bluetooth®” menu on your mobile phone, and selecting the

option “discover” or “add” a Bluetooth® device.

Step 3 - Completing the pairing: Your mobile phone will search for your Bluetooth® Headset. The LED

indicator light must continue to consecutively ﬂash blue and red while your mobile phone is searching

for your Bluetooth® Headset. If it isn’t ﬂashing blue/red repeat step 1 above. When your mobile phone

ﬁnds Bluetooth® Headset, you will need to accept your Bluetooth® Headset by pressing “Pair”, “Yes” or

“OK” on your mobile phone and then conﬁrm using the passkey or PIN number 0000. The headset and

mobile phone are now paired and the LED light on the headset will now ﬂash blue 2 times consecutively.

You will only have to pair your Bluetooth® Headset to your mobile phone once. After this process has

been completed you can use the Bluetooth® Headset only with its paired mobile phone. Repeat steps

1-3 if pairing was unsuccessful.

8 9

Step 4 - Connecting: Most phones require an additional step to “connect” to a Bluetooth® Headset.

Follow the instructions in your mobile phone users manual. Once connected, your Bluetooth® Headset

LED light will ﬂash 1 time every 5 seconds.

If either the Bluetooth® Headset unit or your mobile phone is turned off, most mobile phones will allow you

to automatically connect back to your Bluetooth® Headset once your headset or mobille phone is turned

back on. However with some mobile phones, you will need to manually reconnect. Your mobile phone’s

users manual will guide you through these set up instructions.

Step 5 - Pairing and Connecting to a Second Phone: For those individuals with the Bluetooth®

Headset, it supports a multipoint function to allow simultaneous connection of the headset with 2 mobile

phones. Once you have paired and connected your Bluetooth® Headset to the 1st mobile phone, as per

the instructions above in steps 1-4, to pair and connect your Bluetooth® Headset to a second phone,

place your Bluetooth® Headset in the off mode and repeat the instructions above in steps 1-4.

Please note that if the Bluetooth® Headset is connected with 2 mobile phones and there is an incoming

or outgoing phone call on either phone, the other mobile phone will be temporarily disconnected with the

headset. Once the call is ﬁnished the Bluetooth® Headset will automatically reconnect with the mobile

phone that was temporarily disconnected.

10 11

HOW TO USE THE FEATURES

AnsWering CAlls

•Tap the Main Button of your headset to answer an incoming call.

•For the Bluetooth® Headset, depending on your phone’s capability, when answering the call from your

phone’s keypad you may need to tap the main button 2 times to transfer from the phone to the

Bluetooth® Headset. To transfer back, tap the main button twice again.

mAking CAlls

•When you make a call from your mobile phone, the call will automatically transfer to your headset.

AdJusting volume

•While on a call, press the volume button to increase or decrease the volume on the headset.

voiCe CommAnd diAling

•Tap the Main Button, and after the “BEEP” speak loudly and clearly your desired name.

Some phones do not support this feature.

•When the Headset is connected to 2 mobile phones, the voice dialing feature will be

available only to the mobile phone that the was connected to ﬁrst.

rediAling lAst number

•Double tap the Main Button of your headset until you hear a short tone. Some phones do not support

this feature.

•When connected to two phones, the Bluetooth® Headset will only re-dial the call of the mobile phone that

the Bluetooth® Headset was ﬁrst connected to.

12 13

PlACing A CAll on hold

•Hold the volume button on your Bluetooth® Headset for 3 seconds until you hear a beep.

To resume your conversation hold the volume button again until your hear a beep. Your mobile phone must

support this feature.

CAll WAiting

•Yourheadsetwillindicatethatthereisanincomingcallbybeeping.Torejecttheincomingcall,press

and hold main button for 3 seconds. To answer the incoming call and keep the current call on hold,

tap the main button. To answer the incoming call and hang up the current conversation, double tap

the main button.

•Ifyouareontwocalls,youcanswitchbackandforthbetweencalls.Toswitchbackandforthwithout

hanging up, tap the main button. To switch back and forth with hanging up on the current call, double

tap the main button.

trAnsFerring A CAll

•

Headset to phone: Tap the main button twice when you are on the phone call. Then, the

phone call will transfer from

your Bluetooth®

headset to your mobile phone.

•

Phone to Headset: Tap the main button twice to transfer back to your

Bluetooth®

headset.

reJeCting A CAll

•Press and hold down the main button of your Bluetooth®

headset

until a short tone is heard in

approximately 4 seconds and then release the main button. Depending on your mobile phone settings,

the call will either go to voice mail or the person calling will hear a busy signal.

ending A CAll

•Tap the main button to your headset to end an active call.

right or leFt eAr Fitting

•The Just Wireless® Bluetooth® Headset is ready to wear on your right ear.

If you prefer to use it on your left ear, rotate the ear hook to the other side of the headset.

14 15

QUESTION: I hear static noises.

RESPONSE: 1. Your headset may be too far away from your mobile phone. Your headset should be

within 30 feet of your mobile phone.

2. Your battery may need to be charged.

QUESTION: I cannot hear anything inside my headset.

RESPONSE: 1. Increase the volume level on the headset.

2. Conﬁrm that the headset is paired to your mobile phone.

3. Conﬁrm that the mobile phone is connected to the headset. If it does not

connect, follow the pairing procedures once again.

TROUBLESHOOTING

QUESTION: I have pairing or connecting problems, even though my mobile phone indicates

otherwise.

RESPONSE: You may have deleted the Bluetooth® Headset set up proﬁle from

your mobile phone.

Follow the pairing instructions once again.

QUESTION: Will anything cause interference with my conversation when I am using the

Bluetooth® Headset?

RESPONSE: Appliances such as cordless phones and wireless networking equipment may cause

interference with your conversation. To minimize any interference please keep the

Bluetooth® Headset away from other devices that use or produce radio waves.

iF you need AdditionAl helP

Call us toll free at 888-753-6957 and ask to speak to our technical assistance department.

Be sure to have the users manual for your mobile phone before calling.

16 17

liFetime WArrAntystoring your bluetooth heAdset

•Always store your Just Wireless® Bluetooth® Headset with the power OFF and make sure it is safely

protected.

•Avoid storage at high temperatures (above 40°C/104°F) such as in a hot vehicle or in direct sunlight.

(Storage at high temperatures can reduce performance and battery life)

•Keep the headset or any of its supplied parts from getting wet.

Just Wireless will repair or replace this product if, due to defective parts or workmanship, it does not

perform as specified. This warranty covers only repair or replacement of the product itself. This warranty

is extended to the original consumer purchaser only. Specifically exempt from this warranty are limited-life

consumable components subject to normal wear and tear, such as microphone windscreens, ear cushions,

ear tips, decorative finishes, batteries, and other accessories. In no event does this warranty extend to

instances where the product is damaged through uses for which it was not intended, misuse, mishandling,

removal and/or reinstallation, neglect, accident or tampering. In no event shall Just Wireless be liable for

any indirect, incidental or consequential damages, or lost profits arising out of or related to this product,

or the performance or breach thereof, even if Just Wireless has been advised of the possibility thereof.

Just Wireless liability to customer, if any, shall in no event exceed the total of the purchase price. Some

states do not permit the exclusion or limitation of incidental or consequential damages, therefore, sections of

the above limitation or exclusion may not apply to you. This warranty is in lieu of any other warranty, expressed

or implied, including, but not limited to, any warranty of merchantability or fitness for any particular purpose.

Any representations or promises inconsistent, or in addition to this warranty are unauthorized and shall not be

binding upon Just Wireless. Please contact Just Wireless by phone at 888-753-6957 or by email

[email protected] for return instructions.

Inhaltsverzeichnis

Andere Just Wireless Headset Handbücher

Just Wireless

Just Wireless BTK-722 Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

Doro

Doro Flexus HS2005 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung