JVC NX-BD3 Stücklistenhandbuch

LVT1886-003A

[B]

NX-BD3

This manual explains the network function of this system.

SEPARATE VOLUME

INSTRUCTIONS FOR NETWORK

FUNCTION

NX-BD3_network.book Page 1 Friday, August 8, 2008 9:28 AM

Information on DLNA

• DLNA CERTIFIED™ Audio/Video/Image Player

• This system complies with DLNA Guidelines 1.5.

• You can play back the following file types using the

network function of this system.

• You can also play back MPEG2 and AVCHD files

recorded on Everio.

• File may not be played back properly or the

playback function may be limited to the files even

though the type of playing back file is shown above.

Depending on the performance of the server and

network environment, image frames may drop and

sound may skip while playing back the file.

• “DLNA” stands for “Digital Living Network Alliance”.

Refer to the following website for details.

http://www.dlna.org/

CyberLink Media Server is a registered trademark along with other company and product names mentioned

in this publication, used for identification purposes and remain the exclusive property of their respective

owners.

DLNA and DLNA CERTIFIED are trademarks and/or service marks of Digital Living Network Alliance.

Microsoft, Windows, Windows XP and Windows Vista are registered trademarks or trademarks of Microsoft

Corporation in the United States and other countries.

MUSIC LPCM, MP3

VIDEO MPEG2, MPEG4 AVC

PICTURE JPEG

NX-BD3_network.book Page 1 Friday, August 8, 2008 9:28 AM

Table of contents

Introduction to the network function......................3

General flow chart for

the network function ............................................4

Computer..............................................................5

Networking device ................................................5

Connecting the main unit to the router .................6

Installing CyberLink Media Server........................7

Specifying the shared folders ...............................8

Starting CyberLink Media Server........................10

Occasions requiring

the IP address setup.......................................... 11

Determining the IP address of

the computer...................................................... 11

Assigning the IP address to

the main unit ...................................................... 13

Playing back files................................................ 16

Playing back music files ..................................... 17

Playing back video files ......................................18

Playing back picture files....................................19

Adding shared folders......................................... 20

Wakeup on LAN ................................................. 21

Connecting the main unit to

the computer directly .........................................21

Troubleshooting............................. 22

Introduction

Preparation

Connection

Installing CyberLink Media

Server

Confirming the connection to

the computer

Setting up the IP address

Playing back files stored on

the computer

Reference

NX-BD3_network.book Page 2 Friday, August 8, 2008 9:28 AM

Introduction

You can play back video, audio and still picture files

stored on your computer by setting up the network

with the computer and the main unit.

You must install CyberLink Media Server from the

bundled CD-ROM to your computer.

CyberLink Media Server is a software for sending

video, audio and still picture files stored on your

computer to the main unit.

The network can be easily set up without having to

manually configure the IP address of the main unit by

simply connecting a router with a DHCP function to

the main unit. The DHCP function of the router

automatically assigns the IP address to the main unit.

NOTE

• If the router does not have a DHCP function or you

do not use the DHCP function, you must assign the

IP address to the main unit manually.

• You can also use the network function by

connecting the main unit to the computer directly.

(Refer to page 21.)

You can play back the following file types using the

network function of this system.

• File may not be played back properly or the

playback function may be limited to the files even

though the type of playing back file is shown above.

Depending on the performance of the server and

network environment, image frames may drop and

sound may skip while playing back the file.

• If the source is changed to Network from the other

type of source while the disc tray is open, it closes

automatically.

Introduction to the network

function

Outline of the network function

Internet Modem Router

Computer

Environment in use

Main unit

File types compatible with this

system

MUSIC LPCM, MP3

VIDEO MPEG2, MPEG4 AVC

PICTURE JPEG

NX-BD3_network.book Page 3 Friday, August 8, 2008 9:28 AM

Set up the system following the flow chart shown below. The procedure for setting up the system differs

depending on your usage environment.

NOTE

To connect the main unit to the computer directly, refer to “Connecting the main unit to the computer directly”

on page 21.

General flow chart for the network function

Connect the main unit to the router connected to your computer.

Install CyberLink Media Server to your computer.

Specify the shared folders.

Start CyberLink Media Server, and then make sure that the main unit

recognizes CyberLink Media Server.

Does the main unit recognize

CyberLink Media Server?

Yes No

The IP address is assigned

automatically using the DHCP

function of the router.

Check the cable connection.

Does the main unit recognize

CyberLink Media Server?

Yes No

The IP address has to be set up

manually.

Exit CyberLink Media Server.

Find out the IP address of your

computer.

Assign the IP address to the

main unit.

The setup is complete.

Now you can enjoy playback of files stored on the computer!

Page 6

Page 7

Page 8

Page 10

Page 6

Page 11

Page 13

Page 11

Page 16

NX-BD3_network.book Page 4 Friday, August 8, 2008 9:28 AM

Preparation

Set up your computer and network environment as

follows.

You must install CyberLink Media Server from the

bundled CD-ROM to your computer for playing back

files stored on the computer with this system.

Operating system

• Requirement: Microsoft Windows Vista Home

basic/Premium SP1, Windows XP Home Edition

SP2/SP3, Windows XP Professional SP2/SP3,

Windows XP Media Center Edition 2005

Processor

• Requirement: A 2.6 GHz processor, such as an

Intel Pentium 4 or Advanced Micro Devices (AMD)

processor

• Recommendation: A 3.2 GHz processor or faster

Network Interface Card

• Requirement: Ethernet (802.3) or WiFi (802.11n or

802.11g) network adapter

VGA

• Requirement: Intel, nVidia or ATI VGA card with

64 MB VRAM

Make sure that there is an available LAN terminal on

the router.

Also, make sure that there is an available Ethernet

cable (straight-through cable, not supplied). This

cable is used for connecting the router and the main

unit as shown on page 6.

NOTE

• To connect the main unit to the computer directly,

refer to “Connecting the main unit to the computer

directly” on page 21.

Computer

System Requirements

Random Access Memory (RAM)

• Requirement :512 MB

• Recommendation :1 GB

Free hard disk space

• Requirement: :1 GB

• Recommendation :5 GB

Networking device

Internet Modem Router

Computer

Environment in use

NX-BD3_network.book Page 5 Friday, August 8, 2008 9:28 AM

Connection

This part explains the procedure for connecting the

main unit to the computer via a router with an

Ethernet cable and confirming that the connection is

completed properly.

NOTE

• Before following this procedure, connect the main

unit, speakers and a TV referring to the main

volume of the operation manual for this system.

• To connect the main unit to the computer directly,

refer to “Connecting the main unit to the computer

directly” on page 21.

This part explains the procedure for connecting the

main unit to the computer linked to the Internet via a

router.

• The diagram shown above has been simplified by

omitting the connection of the main unit, speakers

and a TV. Refer to the main volume of the operation

manual for connecting the devices shown above.

• The diagrams of the Internet and modem are

omitted in the later explanations.

* Use a shielded twisted-pair (STP) Ethernet cable.

1Connect one end of the Ethernet

cable (straight-through cable, not

supplied) to the LAN terminal on the

router.

2Connect the other end of the

Ethernet cable to the LAN terminal

on the main unit.

Connecting the main unit to

the router

Internet Modem Router

To the LAN

terminal on the

router

Ethernet cable

(straightthrough

cable,

not supplied)*

Computer

NX-BD3_network.book Page 6 Friday, August 8, 2008 9:28 AM

Installing CyberLink Media Server

The example TV and computer screenshots used in

this manual may differ from the actual screen displays.

CyberLink Media Server is a software for sending

video, audio and still picture files stored on your

computer to the main unit. This part explains the

procedure for installing CyberLink Media Server from

the bundled CD-ROM to the computer.

NOTE

• Make sure you close all anti-virus and other

applications running on your computer before

starting installation.

• This manual explains operations with the English

version of both Windows XP and CyberLink Media

Server as examples. Follow the explanation

referring to the actual operations of your language

version.

• Log onto the computer with administrative rights

(Administrators).

• After installing CyberLink Media Server from the

supplied CD-ROM, it is recommended that you

upgrade CyberLink Media Server to enable you to

utilize the latest functions. Refer to the website

http://www.victor.co.jp/english/download/index-e.html

for upgrading CyberLink Media Server.

(On the computer)

1Start up Windows, and place the

CyberLink Media Server Software

CDROM into your computer’s CD-

ROM drive.

2Click [Next].

3Click [Yes].

The license agreement is displayed.

4You can specify the location to

install.

After finishing this step, install CyberLink Media

Server following the actual displayed

explanations.

5Confirm that the “CyberLink Media

Server” icon is displayed on the

desktop.

You have finished installing CyberLink Media

Server.

Installing CyberLink Media

Server

NX-BD3_network.book Page 7 Friday, August 8, 2008 9:28 AM

(Continued on the next page.)

This part explains the procedure for selecting the

default folders (“My Videos”, “My Pictures” and “My

Music”) as examples.

(On the computer)

1Double-click the “CyberLink Media

Server” icon on the desktop.

CyberLink Media Server starts.

2Select the check boxes next to “My

Videos”, “My Pictures” and “My

Music”, and click [Apply].

NOTE

• To select folders other than the default folders, refer

to “Adding shared folders” on page 20.

• You can store files of different types in one folder.

For example, even when video files and still picture

files are stored in the “My Music” folder, you can

play back those files.

• You must make appropriate individual settings

when virus scan or firewall software has been

installed.

• It may take a while to show the file if you select a

folder with too many contents in.

3Click [View Sharing].

4Confirm that the names of the

shared folders are displayed on the

list.

Before proceeding to the next step, follow

“Playing back files stored on the computer” on

page 16 Steps 1 - 3.

5Click [Access Control].

Specifying the shared folders

NX-BD3_network.book Page 8 Friday, August 8, 2008 9:28 AM

6Click “ ” button to change

“Unauthorized” to “Authorized”,

then click [Apply].

Check the “MAC ADDRESS”. (Refer to

“Assigning the IP address to the main unit” on

page 13.)

NOTE

• Selecting the check box for “Allow new devices to

automatically connect” enables the main unit to

access when the setting is “Unauthorized”.

(For security, this check box has been set to clear in

default settings.)

• To stop sharing a folder

Clear the check box next to it and click [Apply].

• To go back to the previous screen

Click “ ” in the upper left portion of the screen.

• To exit CyberLink Media Server

Click “ ” in the upper right portion of the screen.

• Before deleting a shared folder or file on the

connected computer, cancel folder/file sharing on

CyberLink Media Server.

• Right-click the “ ” icon in a task tray, then select

“Sharing Service Off”.

NX-BD3_network.book Page 9 Friday, August 8, 2008 9:28 AM

Andere Handbücher für NX-BD3

Inhaltsverzeichnis

Andere JVC Heimkinosystem Handbücher

JVC

JVC SP-THD5S Bedienungsanleitung

JVC

JVC TH-S9 Bedienungsanleitung

JVC

JVC TH-A85 Series Bedienungsanleitung

JVC

JVC TH-S77 Bedienungsanleitung

JVC

JVC TH-A35 Bedienungsanleitung

JVC

JVC TH-M508 Bedienungsanleitung

JVC

JVC TH-A25 Bedienungsanleitung

JVC

JVC TH-P3 Bedienungsanleitung

JVC

JVC TH-M303AS Bedienungsanleitung

JVC

JVC LVT2099-029A Bedienungsanleitung

JVC

JVC TH-LB2-B Bedienungsanleitung

JVC

JVC TH-M45 - Progressive Scan Home Theater... Bedienungsanleitung

JVC

JVC TH-A10 Bedienungsanleitung

JVC

JVC TH-A9 Bedienungsanleitung

JVC

JVC TH-C6 Bedienungsanleitung

JVC

JVC LVT1112-001A Bedienungsanleitung

JVC

JVC SP-WA30 Bedienungsanleitung

JVC

JVC TH-G31 Bedienungsanleitung

JVC

JVC TH-A5R Bedienungsanleitung

JVC

JVC LVT0858-001A Bedienungsanleitung

JVC

JVC RX-ES9SL Bedienungsanleitung

JVC

JVC TH-M45 - Progressive Scan Home Theater... Bedienungsanleitung

JVC

JVC SP-PWV70 Bedienungsanleitung

JVC

JVC SP-PWS5 Bedienungsanleitung

Beliebte Heimkinosystem Handbücher anderer Marken

Samsung

Samsung HT-ES4200K Bedienungsanleitung

Harman Kardon

Harman Kardon HS 100 Bedienungsanleitung

Samsung

Samsung HT-P10 Bedienungsanleitung

Philips

Philips HTS5131 Betriebsanleitung

Goodmans

Goodmans GDVD19SWS Bedienungsanleitung

Moxi

Moxi media center Bedienungsanleitung

Samsung

Samsung HT-EM35 Bedienungsanleitung

LG HE903PAW Bedienungsanleitung

Bose

Bose SoundTouch 520 Bedienungsanleitung

Sony

Sony BDV-N990W Bedienungsanleitung

Manta

Manta GK-500 Bedienungsanleitung

Sharp

Sharp SBW800 Bedienungsanleitung

Philips

Philips HTS3541 Bedienungsanleitung

LG LHT799 Bedienungsanleitung

Samsung

Samsung HT-TWZ415 Bedienungsanleitung

Loewe

Loewe REFERENCE 52 SL FHD+ 200 NMP Bedienungsanleitung

Samsung

Samsung AH68-02166R Bedienungsanleitung

RCA

RCA 600-Watt Bedienungsanleitung