JVC HV-53PRO Bedienungsanleitung

INSTRUCTIONS

REAR PROJECTION TELEVISION

HV-53PRO

Contents

Safety precautions

Cautions on screen treatment

Setting up your TV

TV buttons and functions

Remote control buttons

and functions

Using the TV's menu

Basic operation

PICTURE SETTING menu

PICTURE FEATURES menu

SOUND SETTING menu

FEATURES menu

INSTALL menu

Additional preparation

Troubleshooting

Specifications

. . . . . . . . . . . . 2

. . . 3

. . . . . . . . . . . . 4

. . . . . . . 7

. . . 8

. . . . . . . . . . . 16

. . . . . . . . . . . . . 16

. . . . 17

. . . 18

. . . . . . 20

. . . . . . . . . . . 21

. . . . . . . . . . . . . 23

. . . . . . . . . 27

. . . . . . . . . . . . . . 30

. . . . . . . . . Back cover

LCT1078-001A_p01-15 11/2/01, 2:11 PM1

Black

Thank you for buying this JVC colour television.

To make sure you understand how to use your new TV, please read this manual thoroughly

before you begin.

Safety precautions

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSETHIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION:

TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE

USE OF THIS TV.

1 Operate only from the power source indicated on the

rear of the TV.

2 Avoid damaging the power cord and mains plug.When

unpluging the TV, grasp the mains plug. Do not pull on

the power cord.

3 Never block or cover the ventilation openings.

Never install the TV where good ventilation is

unattainnable.

When installing this TV, leave spaces for ventilation around the TV of more than the minimum dis-

tances as shown.

4 Do not allow objects or liquid into the cabinet openings.

5 In the event of a fault, unplug the unit and call a service technician.

Do not attempt to repair it yourself or remove the rear cover.

6 If you are not going to use this TV for a long preriod of time, be sure to disconnect the AC plug from

the AC soket.

7 This TV set is mounted on casters which make it easier to move.However, when positioning or

moving the TV, observe the following cautions:

--- Do not position theTV on a slanting or unstable place.

--- Do not use excessive force, which could damage the TV, or even overterm the TV, breaking it and

possibly injuring someone.

--- To avoid overturning the TV, which could injure someone, secure it in place using the method

described next page.

--- Before moving the TV, unplug the plug from the AC socket, and be sure to disconnect ALL of the

cables connecting the TV to external device.

--- There must be at least 8 mm between the bottom of theTV and the floor.

When moving the TV, make sure that the bottom of theTV does not scrape along the floor.

In addition, be careful when moving the TV across thick carpets, bumps in the floor, or other

changes in floor level (such as at the edges of carpets). Be especially careful that the TV or the

caster wheels do not eatch on anything.If the TV falls over, the TV will break and could injure

someone.

15mm

15mm10mm

10mm

LCT1078-001A_p01-15 11/2/01, 2:11 PM2

Black

To prevent theTV from falling over:

Use the two small plastic loops on the back of the TV

set, and connect them to a wall or column using two

secure wires or strong cords.

•The wire or strong cord, and wall ring (or similar

attachment), are not supplied with this TV set. Use

commonly available items, but make sure that they are

strong.

•The thread or wire should be straight.

•Make sure that the wire or strong cords is taut and

securety attached to a wall ring (or similar attachment).

Cautions on screen treatment

Screen Burn:

Screen burn will only happen if you misuse theTV, and therefore damage from screen burn is not

covered by the warranty.Screen burn happens when images remain on the screen without moving for

an extended period of time.Screen burn can occur in any projection television made by any

manufacturer.

You may have seen screen burn on ATM bank machines.People who use “screen savers” on their

computer monitors are saving their monitors from screen burn.Especially for projectionTV’s screen burn

is caused by programmes or images displayed when the TV has a high CONTRAST or BRIGHTNESS

setting.

•Do not play video games, computer programme, or similar programmes that have fixed or repetitive

images.

•Keep contrast and brightness low --- especially on teletext programmes, news programmes, business

reports, and home-shopping (or similar) programmes.To adjust contrast and brightness, see page 17.

•Do not leave fixed images on the screen for long time.

Screen Cleaning:

Your projection television screen is fragile and should be handled with exterme care, especially if you

are forced to touch the screen directly --- i.e.when cleaning it. Be careful not to scratch the screen with

jewellery or fingernails.

The following products will DAMAGETHE SCREEN. Do not use then under any circumstances.

•AMMONIA. NEVER use deterrgents that contain ammonia !

•AEROSOLS AND CHEMICALS. NEVER use aerosol or chemical cleaners !

•GLASS AND WINDOWS CLEANERS. NEVER use glass or windows cleaners !

To clean the screen:

Clean the screen

only

with a solution consisting of water and mild dish detergent.

1. Add two to three drops of detergent to one quart of water.

2. Take a soft cloth (such as a cotton tee-shirt), dampen the cloth with the soapy solution, and

gently

wipe the screen from top to bottom.

3. Gently wipe off any soap left on the screen.

Plastic loop

Wire or

strong

cord

LCT1078-001A_p01-15 11/2/01, 2:11 PM3

Black

CAUTION

•Turn off all the epuipment including the TV before

connecting anything.

Connecting the aerial and VCR

•Aerial cable is not supplied. Use a good quality

75-ohm coaxial cable.

•Read the manual that came with the VCR before

connecting.

If not connecting a VCR (see fig.A) :

Connect an aerial cable to the aerial socket

on this TV .

If connecting a VCR (see fig.B) :

1 Connect the aerial cable to the aerial input

socket on the VCR, and connect the VCR

and TV with another aerial cable.

2 Connect the VCR's VIDEO OUT (video

output) jack and the TV's VIDEO jack with

a video cable.

To connect a VCR to the TV with an S-VIDEO cable:

Connect the VCR's S-VIDEO OUT (S-VIDEO output)

connector and TV's S connector with an S-VIDEO

cable A, instead of connecting with a video cable.

3 Connect the VCR's VIDEO OUT (audio L/R

output) jacks and the TV's AUDIO jacks (L/

MONO and R) with an audio cable.

•If the VCR's audio output is in mono, connect the

VCR's AUDIO OUT (audio output) jack and the

TV's AUDIO L/MONO jack with an audio cable.

•You can use the AV COMPU LINK function if your

VCR has an AV COMPU LINK terminal. For details,

see “Connecting AV COMPU LINK Supported

Devices” on page 29.

2 Connecting the power cord

Connect the mains plug to the AC outlet.

3 Putting the batteries into the

Remote control

Use two AA/R6 batteries.

Insert the batteries from the end, making sure the

and polaritiles are correct.

•Follow the warnings printed on the batteries.

•If the remote control does not work properly,

replace the batteries.

•The batteries we supply are only for setting up and

testing your TV. Please replace them as soon as

necessary.

Setting up your TV

Fig.A

L/MONO

AUDIO

L/MONO

RAUDIO

C Y/VIDEO

VIDEO

VIDEO-2

VIDEO

OVER

VIDEO-3/

COMPONENT

VIDEO-1

OUTPUT

AVCOMPULINK

Back of the TV

Fig.B

Back of the TV

L/MONO

AUDIO

L/MONO

RAUDIO

C Y/VIDEO

VIDEO

VIDEO-2

VIDEO

OVER

VIDEO-3/

COMPONENT

VIDEO-1

OUTPUT

AVCOMPU LINK

LCT1078-001A_p01-15 11/2/01, 2:11 PM4

Black

4 Making the initial settings

When the TV is first turned on, it enters the initial setting mode,

and the JVC logo is displayed.

1 Press the main power button on the TV

The TV is turned on, and the JVC logo appears.

•If the power lamp on the TV lights red and does not change

to green, your TV is in the standby mode. Press the POWER

button on the remote control to turn the TV on.

•If the JVC logo does not appear, your TV has already been

turned before. In this case,use the "LANGUAGE" and

"AUTO PROGRAM" functions to make the initial settings.

For details, see "INSTALL menu" on page 23.

2 Press the MENU/OK button

The LANGUAGE menu appears. You can choose a

language for the on-screen language.

3 Press the

buttons to choose ENGLISH.

Then press the MENU/OK button.

The AUTO PROGRAM function starts. The TV channels you

receive are automatically stored in the programme numbers

list.

•To cancel the AUTO PROGRAM function, press the

DISPLAY button.

4 After the TV channels have been stored in the

programme number (PR) list, the EDIT menu

appears.

•You can proceed to edit the programme numbers

list using the EDIT/MANUAL function. For details, see

"EDIT/MANUAL" on page 23.

•If a TV cannel you want to view is not stored in the

programme numbers list, you can register it using the

MANUAL function. For details, see "EDIT/MANUAL" on

page 23.

Setting up your TV

CH/CC

PR ID

INSERT

DELETE

MANUAL

MOVE

EDIT

:EXIT

:OK

: ACK

DISP

: ACK

:OK

DISP

CH 10

AUTO PROGRAM

20%

:EXIT

:OK

: ACK

DISP

ZOOM

MULTI

MUTING

NEXTPIP

POSITION

FREEZE MENU/

SWAP

SUB-P

PIP

TEXT

STROBE

DISPLAY

RETURN

TV/VIDEO

BASS

PICTURE

MODE

POWER

SPATIALIZER

456

789

COLOUR

SYSTEM

SOUND TV/TEXT

HOLD MODE REVEAL SIZE

SUBPAGE STORE CANCEL INDEX

Main power button

POWER lamp

LCT1078-001A_p01-15 11/2/01, 2:12 PM5

Black

Setting up your TV

•The AUTO PROGRAM function does not store a TV

channel to the programme number 0 (AV).

5 If you do not need to use the EDIT/

MANUAL function, press the MENU/OK

button to close the EDIT menu.

5 Adjusting CRT colour convergence

This TV has three color projection tubes : one for

red, one for green and one for blue. When mixed

together in the proper proportion, the output of

these three colour tubes can produce any colour.

To produce these colour, however, the beams must

be precisely aligned over each other so that the

colours can be mixed. The produce of aligning

these picture beams is called “convergence”.

•Colours may become saparated after the TV has

been moved, or over a long period of time if

regularly subjected to low level vibrations.If the

colours become saparated, please perform the

ajustment below again.

1 Press the MENU/OK button.

The main menu appears.

PICTURE SETTING

PICTURE FEATURES

SOUND SETTING

FEATURES

INSTALL

:EXIT

:OK

: ACK

DISP

2 Press the

buttons to choose PICTURE

FEATURES menu. Then press the MENU/

OK button.

DIGITAL VNR

DigiPure

PULL DOWN

COLOUR SYSTEM

ZOOM

DIGITAL CONVERGENCE

AUTO

PICTURE FEATURES

:EXIT

:OK

: ACK

DISP

3 Press the

buttons to choose DIGITAL

CONVERGENCE. Then press the MENU/

OK button.

The convergence adjustment screen

appears with crosses (+) displayed in 9 locations.

Before the convergence

is adjusted After the convergence

is adjusted

Locations where the crosses appear in 3 colours:

Convergence adjustment is required. Perform

steps 4 and 5.

Locations where the crosses are white:

The convergence is adjusted correctly.

•If all the crosses are white, no convergence

adjustment is needed.

4 Use the number buttons on the remote

control to select the location to be

adjusted.

The locations of the crosses correspond to the

positions of the number buttons on the remote

control. A box appears around the selected cross.

1 2

4 5 6

7 8 9

5 Adjust the three coloured crosses until

they overlap and appears as a single

(white) cross.

1. Press the NEXT button to change the colour of the

box to the colour of the cross you want to adjust

(red or blue).

•You cannot adjust the green cross.

2. Use the

and

buttons to adjust the

position of the cross.

To cancel the adjustments before completing the

procedure:

Press the DISPLAY button.

6 Press the MENU/OK button to end the

convergence adjustment procedure.

•If you do not use the TV controls for roughly one

minute, the convergence adjustment screen

automatically disappears.

Now, the setting up is complete.

Please enjoy your new JVC TV!

LCT1078-001A_p01-15 11/2/01, 2:12 PM6

Black

Turn the main power on

Press the main power button 1.

The POWER lamp 2lights red and your TV is in the

standby mode.

To turn the main power off :

press the main power button again.

The POWER lamp 2goes off.

Turn the TV on from standby mode

Press the CHANNEL-/+ buttons 7.

The POWER lamp 2lights red to green and your TV

will be turned on.

•You can also turn on the TV by pressing the

TV/VIDEO button 5while it is in standby mode.

Choose a TV channel

Press the CHANNEL-/+ buttons 7.

Choose a VIDEO terminal

Press the TV/VIDEO button 5or CHANNEL

-/+ buttons 7.

Adjust the volume

Press the VOLUME-/+ buttons 4.

The volume level indicater appears.

MENU button 8

Press to open the menu.

For details, see "Operation with the buttons on the

TV" on page 16.

TV buttons and functions

SPATIALIZER lamp 3

If you set the SPATIALIZER function to MONO or

LIVE,the SPATIALIZER lamp lights.

Headphone jack 9

Connect the headphones with a stereo mini-jack

(3.5mm in diameter).

When using the headphones, follow the operation

procedure "HEADPHONE" on page 20.

VIDEO-1 terminal 0

•See page 4 and 27.

VIDEO-2 terminal -

•See page 27.

VIDEO-3/COMPONENT terminal =

•See page 22 and 27.

VIDEO-4 terminal 6

•See page 27.

OUTPUT terminal ~

•See page 27.

AV COMPU LINK terminal !

•See page 27 and 29.

Aerial socket @

Connect the aerial cable.

•See page 4.

MENU CHANNEL

S-VIDEO V L/MONO R

VOLUME YV/VIDEO

EXIT

IN(VIDEO4)

(Behind the cover)

L/MONO

AUDIO

L/MONO

RAUDIO

C Y/VIDEO

VIDEO

VIDEO-2

VIDEO

OVER

VIDEO-3/

COMPONENT

VIDEO-1

OUTPUT

AVCOMPU LINK

LCT1078-001A_p01-15 11/2/01, 2:12 PM7

Black

Turn the TV on from standby mode

Press the POWER button.

The POWER lamp lights red to green and your TV will

be turned on.

•You can turn on the TV from the standby mode by

pressing the TV/VIDEO button, the CHANNEL -/+

buttons or the number buttons.

To turn the TV off:

Press the POWER button again.

The POWER lamp changes from green to red and the

TV enters standby mode.

Choose a TV channel

Choose a programme number in which a TV channel

has been set.

Press the CHANNEL-/+ buttons or enter the

programme number (PR) with the number

buttons.

•If you want to put a two-digit channel into the TV,

press the -/--button to change to the two-digit

entry system.

•You can select a channel from the PR LIST. For

details, see "DISPLAY button" on page 10.

•If you do not have a clear picture or no colour

appears, follow the operation procedure "COLOUR

SYSTEM button" on page 11.

•If you cannot hear sound normally even when the

picture appears normally, follow the operation

procedure “SOUND SYSTEM button”on page 11.

Adjust the volume

Press the VOLUME-/+ buttons.

•You cannot adjust the volume of your headphones.

Follow the operation procedure "HEADPHONE" on

page 20.

Watch images from external devices

Choose a VIDEO terminal to which the external

device has been connected.

Press the TV/VIDEO button.

•You can choose a VIDEO terminal with the

CHANNEL -/+ buttons or from the PR LIST.

To return to a TV channel:

Press the TV/VIDEO button, the CHANNEL-/+ buttons

or the number buttons.

Remote control buttons and functions

ZOOM

MULTI

MUTING

NEXTPIP

POSITION

FREEZE

MENU/

SWAP

SUB-P

PIP

TEXT

STROBE

DISPLAY

RETURN

TV/VIDEO

BASS

PICTURE

MODE

POWER

SPATIALIZER

456

789

COLOUR

SYSTEM

SOUND TV/TEXT

HOLD MODE REVEAL SIZE

SUBPAGE STORE CANCEL INDEX

LCT1078-001A_p01-15 11/2/01, 2:12 PM8

Black

MUTING button

Press the MUTING button to turn off the

volume. Pressing the MUTING button again

resumes the previous volume level.

•When the TV’s MUTING function is on, is

displayed on the screen. However, to prevent

screen burn-in, the mark automatically dims if no

TV operation has been performed for a period of

about one minute.

ZOOM button

You can change the screen size according to the

picture aspect ratio. Choose the optimum one from

the following ZOOM modes.

Press the ZOOM button to choose a mode.

•If you press the ZOOM button when receiving the

Progressive Video Signal (525P signal), “525P”

appears on the screen and the ZOOM function

does not operate.

REGULAR :

Use to view a normal picture (4:3 aspect ratio) as its

original size is.

ZOOM :

You can zoom up the Wide picture (16:9 aspect ratio)

to fill the TV screen.

•The left side and right side of the Wide picture

(16:9 aspect ratio) will be cut off.

SPATIALIZER button

You can enjoy Surround sound with a "live" effect by

using the SPATIALIZER function.

Press the SPATIALIZER button to choose a

mode.

LIVE :

Live allows you to enjoy normal stereo sound

converting it into surround sound with added depth

and ambience.

MONO :

Mono allows you to enjoy normal monaural sound by

converting it into a stereo-like sound.

OFF :

This function is turned off.

Remote control buttons and functions

•The LIVE mode works properly only with stereo

sound.

•The LIVE mode does not work correctly with

headphones.

•The MONO mode works properly only with

monaural sound.

The SPATIALIZER is manufactured under lisense from

Desper Products,Inc.

BASS button

You can enjoy a powerful bass sound by using the

SUPER BASS (Super Bass Reflex) function.

Press the BASS button to turn the SUPER

BASS function on or off.

ON :

This function is turned on.

OFF :

This function is turned off.

PICTURE MODE button

You can choose one of three PICTURE MODEs (three

kinds of picture setting) to adjust the picture settings

automatically.

Press the PICTURE MODE button choose a

mode.

BRIGHT :

Heightens contrast and sharpness.

STANDARD :

Standardizes picture adjustment.

SOFT :

Softens contrast and sharpness.

RETURN+ button

The RETURN+ button has two functions;

the RETURN+ function and the RETURN function. If a

channel has been registerd as the "Return Channel",

the RETURN+ function operates. If there is no setting

for the "Return Channel", the RETURN function

operates.

RETURN+ function :

By registering a channel you frequently view as the

"Return Channel", you can select that channel at any

time simply by pressing the RETURN+ button.

To register a TV channel as the "Return Channel" :

Choose the Programme number to which the channel

you want to register has been set, and press the

RETURN+ button and hold for more than 3 seconds

continuously. "RETURN PLUS PROGRAMMED!" is

displayed and the registration is completed.

LCT1078-001A_p01-15 11/2/01, 2:12 PM9

Black

To cancel register a TV channel as the

"Return Channel" :

while viewing any TV channel, press the RETURN+

button and hold for more than 3 seconds

continuously. "RETURN PLUS CANCELED!" is

displayed and the registration is cancelled.

•When you turn off the TV, the registration for the

"Return Channel" is cancelled.

•If you want to view the "Return Channel" and

another TV channel alternately, first choose a

channel other than the "Return Channel". and then

press the RETURN+ button to change the channel

to the "Return Channel" In this way, you can view

two channels alternately by pressing the

RETURN+ button.

RETURN function :

The TV temporarily memorises the TV channel that

was choosen right before the current TV channel as

the "Last Channel". By pressing the RETUTN+ button,

you can alternately view the current TV channel and

the "Last Channel".

•If you want to view two channels alternately by

using the RETURN function, first choose one TV

channel and then choose the other TV channel

with the Number buttons. If you choose the TV

channel without using the Number buttons, there

are cases where a channel other than the one you

first chose is registered as the "Last Channel".

/ button

When you are viewing a bilingual broadcast

programme, you can choose the sound from Bilingual

I (Sub I) or Bilingual II (Sub II). When the stereo

broadcasting is received poorly, you can change from

stereo to mono sound so that you can hear the

broadcast more clearly and easily.

Press the / button to choose a sound

mode.

: Stereo sound

: mono sound

: Bilingual I (sub I)

: Bilingual II (sub II)

MONO : Cancels the Multi Sound function, and the

sound becomes monaural.

•The sound mode you can choose differs

depending on the TV programme.

•This function does not work in the VIDEO

modes.

Remote control buttons and functions

PR ID

+10-10

PR LIST

No indication

:EXIT

:OK

DISPLAY button

You can display the PR LIST, programme number or

VIDEO terminal number on the screen.

Press the DISPLAY button.

Press the DISPLAY button changes the display as

follows:

•To prevent screen burn-in, the PR LIST menu

automatically disappears from the screen if no TV

operation has been performed for a period of

about one minute.

Also, the programme number and VIDEO terminal

number automatically dim.

Choose a TV channel or a VIDEO terminal

1 Press the DISPLAY button to display the

PR LIST.

2 Press the

and

buttons to choose

a programme number or VIDEO terminal.

Then press the MENU/OK button.

•For programme numbers with the CHANNEL

GUARD function set, the (CHANNEL GUARD)

mark is displayed next to the programme number

in the PR LIST.

•The VIDEO terminals are registered after the

programme number PR99.

LCT1078-001A_p01-15 11/2/01, 2:12 PM10

Black

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JVC Projektionsfernsehen Handbücher

JVC

JVC AV-48WP34/AHA Bedienungsanleitung

JVC

JVC av-6100 Bedienungsanleitung

JVC

JVC HD-56GC87 Bedienungsanleitung

JVC

JVC HD-52G566 Bedienungsanleitung

JVC

JVC HD52FA97 - 52" Rear Projection TV Bedienungsanleitung

JVC

JVC AV-65WP74/HA Bedienungsanleitung

JVC

JVC HD-52Z575 Bedienungsanleitung

JVC

JVC HD56FH96 - 56" Rear Projection TV Bedienungsanleitung

JVC

JVC I'Art Pro AV-56WP84 Bedienungsanleitung

JVC

JVC HD61FH96 - 60" Rear Projection TV Bedienungsanleitung

JVC

JVC I'Art Pro AV-56P776 Bedienungsanleitung

JVC

JVC HD52Z585 - 52" Rear Projection TV Bedienungsanleitung

JVC

JVC HD-ILA HD-56FN98 Bedienungsanleitung

JVC

JVC AV 60D501 Bedienungsanleitung

JVC

JVC HD-Z56RF7/A Bedienungsanleitung

JVC

JVC I'Art Pro 0705JGI-II-IM Bedienungsanleitung

JVC

JVC HD-ILA HD-52Z795 Bedienungsanleitung

JVC

JVC HD58S998 - Ultra Slim 1080p HDILA Projection... Bedienungsanleitung

JVC

JVC I'Art Pro 1204TNH-II-IM Bedienungsanleitung

JVC

JVC HD-Z56RF7 Bedienungsanleitung

JVC

JVC HD-Z70RX5 Bedienungsanleitung

JVC

JVC AV-48P777/H Bedienungsanleitung

JVC

JVC AV-65WP74/HA Bedienungsanleitung

JVC

JVC I'Art Pro AV-48P776 Bedienungsanleitung

Beliebte Projektionsfernsehen Handbücher anderer Marken

Samsung

Samsung ST-43T6P Bedienungsanleitung

Toshiba

Toshiba ColorStream TP50G60 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-65734 Bedienungsanleitung

Optoma

Optoma EP652A Bedienungsanleitung

Samsung

Samsung SP43T8HPX/XEC Bedienungsanleitung

Philips

Philips 28PW6006 - annexe 1 Bedienungsanleitung

Sony

Sony KP-57WS500 - 57" Hi-scan 1080i™ 16:9 Projection... Benutzerhandbuch

Philips

Philips 43PP8421 Bedienungsanleitung

Hitachi

Hitachi 51F510 Bedienungsanleitung

RCA

RCA P52950 Bedienungsanleitung

Sony

Sony KP-51DS1U Bedienungsanleitung

Magnavox

Magnavox 51MP392H - 51" Widescreen Hd Ready Tv Bedienungsanleitung

Hitachi

Hitachi 46F510 Bedienungsanleitung

Pioneer

Pioneer Elite PRO 510HD Bedienungsanleitung

Philips

Philips 43PP8421 Handbuch

Sony

Sony GRAND WEGA KDF-55XS955 Bedienungsanleitung

Sony

Sony KP-46WT520 - Wide Screen Projection Tv Bedienungsanleitung

Toshiba

Toshiba 42HM66 - 42" Rear Projection TV Bedienungsanleitung