JVC D-ILA DLA-RS40 Montageanleitung

JVC D‐ILA Projector Firmware Update Procedure

This document describes the procedure to update the firmware for JVC D-ILA Projectors:

• DLA-X3

• DLA-RS40

Notes:

• It is important that the correct firmware update file be used for the appropriate projector. Use of

incorrect firmware file could render the projector inoperative.

• Customized settings on the projector would be erased during firmware update. Note down the

customized settings and re-enter after firmware update is completed.

• End-user agrees to use this firmware at his own risk. End-user bears the total responsibility for any

failure arising from installing the firmware.

File Download:

Download the appropriate firmware update file for your projector model to your PC desktop.

It is a self-extracting file and installs the ILA-FPJ Updater to the PC.

Tools Required:

• JVC Update Program Installer: ILA-FPJ Updater

• A Standard PC running Windows XP™ or Later (32-bit versions) with a USB Port

• USB to Mini-USB cable

• Philips screwdriver

USB Driver Installation:

JVC ILA-FPJ Updater program should have been installed on your PC at this point. Next step is to install the USB

driver so that PC can communicate with the projector using USB connection. Administrator level access to the

PC is required to proceed.

1. Press the STANDBY button twice to put the projector in STANDBY mode. Unplug the power cord from

the projector.

2. Remove the screw and cover located above the AC connector exposing the USB connector.

3. Plug the Mini USB end to the connector on the projector and the other end to the PC.

4. Press and hold the STANDBY button on the projector while plugging in the power cord. The three LEDs

on the projector should be lit to indicate Download Mode.

5. PC detects the projector as new hardware. Then it opens Found New Hardware Wizard to help install

the drivers.

6. In the Hardware Wizard screen, for the question “Can Windows connect to Windows Update to search

for software?” click on “No, not this time”, and then click “Next”.

7. For the question “What do you want the wizard to do?”, click on “Install the software automatically

(Recommended)”. Then click “Next”.

8. The driver will be installed and a confirmation message is displayed that the installation is finished.

9. If the driver does not install automatically, it can be installed manually. The USB Driver and .INF file can

be found at \Program Files\ILA-FPJ\Updater\X3_V1_2\.

10. When the driver is installed successfully, message “Found New Hardware. Your new hardware is

installed and ready to use.”

11. Next step is to update the projector firmware. If you are going to update the firmware immediately after

USB driver installation, leave the projector in Download Mode and proceed to step 3 of the Firmware

Update procedure.

Firmware Update:

1. While in STANDBY mode, remove the power cord.

2. Press and hold the STANDBY button on the projector while plugging in the power cord. The three LEDs

on the projector should be lit to indicate Download Mode.

3. Launch the ILA-FPJ Updater program from the START→ All Programs button.

4. Click on “Browse” button and navigate to locate the appropriate file. Refer to the chart below.

For example, X3_V1_2.brec2 can be found at “\Program Files\ILA-

FPJ\Updater\X3_V1_2\X3_V1_2.brec2”.

Select the appropriate update file and click “Open”.

5. The path and filename will be shown at the top of the program. Click “Update” button.

6. Choose the appropriate projector model, and click “OK”. Next is a message to confirm the selected

projector model to be updated.

7. Click “Yes” to start downloading the image file.

8. It takes approximately 2 minutes to update and progress bar shows the activity. When finished

updating, click on “OK” button.

9. After a 5-second wait, press the STANDBY/On button on the projector. The 3 LEDs will flash slowly for

approximately 40 seconds after which the projector goes into STANDBY MODE.

FIRMWARE VERSION CHECK

1. Leave the USB cable connected. Press the STANDBY button and wait for the blue-back picture to be

displayed. Click on the “Get Ver.” button on the Updater Program. If update is successful, it should

display “ver1.2”.

After update is finished, switch off the projector. Remove the power cord. Unplug the USB cable and

reinstall the cover with screw.

Andere Handbücher für D-ILA DLA-RS40

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JVC Projektor Handbücher

JVC

JVC DLA-SH7NLG Bedienungsanleitung

JVC

JVC DLA-G150CLU Bedienungsanleitung

JVC

JVC DLA-RS620 Bedienungsanleitung

JVC

JVC DLA-X9000 Bedienungsanleitung

JVC

JVC G1000S Bedienungsanleitung

JVC

JVC D-ILA DLA-RS40 Bedienungsanleitung

JVC

JVC DLA-RS1X - Reference Series Home Cinema... Bedienungsanleitung

JVC

JVC DLA-RS1U - Reference Series Home Cinema... Administratorhandbuch

JVC

JVC Reference DLA-RS6710U Bedienungsanleitung

JVC

JVC LCT2441-001B Bedienungsanleitung

JVC

JVC DLA-VS4010 Bedienungsanleitung

JVC

JVC DLA-RS15U - Reference Series Home Cinema... Installationsanleitung

JVC

JVC AV-P950 Bedienungsanleitung

JVC

JVC DLA-RS520 Gebrauchsanweisung

JVC

JVC DLA-X35B Bedienungsanleitung

JVC

JVC DLA-SH7NLG Bedienungsanleitung

JVC

JVC DLA-X30B Bedienungsanleitung

JVC

JVC DLA-HD10KSU - 1080p Home Theater Projector Bedienungsanleitung

JVC

JVC DLA-M20U - D-ila Projector--1.5:1 Fixed Bedienungsanleitung

JVC

JVC DLA-X990R Gebrauchsanweisung

JVC

JVC DLA-SH4KNL Bedienungsanleitung

JVC

JVC LX-NZ30 Bedienungsanleitung

JVC

JVC DLA-DS1U - General Purpose D-ila Projector Bedienungsanleitung

JVC

JVC DLA-RS6710 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung