JVC USB Connection Kit Bedienungsanleitung

INSTRUCTIONS

LYT0744-001A

USB CONNECTION KIT

2EN

JVC SOFTWARE LICENSE AGREEMENT

TO CUSTOMERS:

MAKE SURE TO READ THIS CAREFULLY BEFORE OPENING THE SEALED SOFTWARE

PACKETS

Thank you for purchasing our product. In order to start using the software program en-

closed, you are required to accept the terms and conditions of the agreement as pro-

vided below.

Software License Agreement

This is a legal agreement between you (either an individual or an entity) and Victor Company

of Japan, Limited (JVC). By opening the sealed software packages and/or by using the Pro-

gram, you are agreeing to be bound by the terms of thisAgreement. Should you not agree to

the terms hereof, return the unopened software packets and the accompanying items to the

place where you obtained them.

1. GRANT OF LICENSE

This License Agreement (Agreement) permits you to use the software program (Program)

enclosed in this package and/or the accompanying written material (e. g. printed manuals).

Although you are also granted license to load the Program into temporary memory (i. e. RAM)

or install the Program once into permanent memory (e. g. hard disk, CD-R, or other storage

device) of one (1) computer system, you are strictly prohibited to install the Program on a

network server for the sole purpose of internal distribution.

2. COPYRIGHT

Notwithstanding the provision of Article 1 hereof, any copyright in the Program is owned ex-

clusively by JVC and is protected by the Japanese copyright law, copyright laws of other

countries, as applicable, and relevant provisions under international treaties including the

Berne Convention for the Protection of Literary and Artistic Works, as amended, and the

Universal Copyright Convention, as amended. Therefore, you must treat the Program like any

other copyrighted material except that you may either (a) make one (1) copy of the Program

solely for your personal backup or archival purposes, or (b) transfer the Program to a single

hard disk, provided that you keep the original solely for your personal backup or archival

purposes.

3. RESTRICTION ON THE PROGRAM

You may not reverse engineer, decompile, disassemble, revise or modify the Program, except

to the extent that such restriction is expressly prohibited by applicable law. JVC and its dis-

tributors and dealers shall not be liable for any claims or defects etc. arising out of or in

connection with such prohibited activities as indicated in this Agreement.

4. OTHER RESTRICTIONS

You may not rent, lease or transfer the Program to any third party nor let such a party use the

Program.

IMPORTANT

EN 3

5. LIMITED WARRANTY

JVC warrants that any media in which the Program is embodied (e.g. floppy discs, CD-ROM,

etc.) are free from any defects in materials and workmanship for a period of thirty (30) days

from the date of your purchase and that any hardware accompanying the Program is also free

from defects to the extent provided in the attached Warranty Form. JVC’s entire liability and

your exclusive remedy in connection with the Program shall be, at JVC’s option, either (a)

return of the price paid, or (b) replacement of defective Program media.

6. DISCLAIMER OF WARRANTIES

EXCEPT FORTHE EXPRESS WARRANTIES STATED HEREINAND TO THE EXTENT PER-

MITTED BY APPLICABLE LAW, JVC AND ITS SUPPLIERS DISCLAIM ANY OTHER WAR-

RANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED

WARRANTIES OF MERCHANTABILITYAND FITNESS FOR APARTICULAR PURPOSE IN

REGARD TO THE PROGRAM AND THE ACCOMPANYING PRINTED MATERIALS.

7. LIMITED LIABILITY

TO THE EXTENT PERMITTED BYAPPLICABLE LAW, IN NO EVENT SHALL JVC AND ITS

SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUEN-

TIAL DAMAGES WHATSOEVER, REGARDLESS OF THE FORM OF ACTION WHETHER

IN CONTRACT, TORT, STRICT PRODUCT LIABILITY OR OTHERWISE (INCLUDING BUT

NOT LIMITED TO DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS

OF BUSINESS INFORMATION ORANY OTHER PECUNIARYLOSS) ARISING OUTOF OR

IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE PROGRAM, EVEN IF

JVC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Victor Company of Japan, Limited

4EN

CONTENTS

JVC SOFTWARE LICENSE AGREEMENT 2

CONTENTS 4

SECTION FOR Windows

Operating Environment .................................................................................... 5

Connection ...................................................................................................... 5

Installing the Software (For Windows®98) ........................................................ 6

Installing the Software (For Windows®2000).................................................... 7

Installing the Software (For Windows®Me) ....................................................... 8

Copying Image Data from the Digital Video Camera to the Computer.............. 9

Copying Print Frame Images from the Computer to the Digital Video Camera .... 9

SECTION FOR Macintosh 10

Operating Environment .................................................................................. 10

Connection .................................................................................................... 10

Installing the Software .................................................................................... 11

Copying Image Data from the Digital Video Camera to the Computer............ 12

Copying Print Frame Images from the Computer to the Digital Video Camera ..... 12

Uninstalling the Software ...............................................................................13

PRINT FRAME IMAGES 14

Presto! Mr. Photo Gold 17

NOTICE FOR USERS 23

CAUTION:

●Do not attempt to play the provided CD-ROM on an audio CD player or portable CD

player. Doing so could generate excessively strong signals that could damage the

circuitry or speakers in an audio CD player.

How to handle a CD-ROM

●

Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not

write anything or put a sticker on either the front or back surface. If the CD-ROM gets

dirty, gently wipe it with a soft cloth outward from the center hole using a circular motion.

●Do not use conventional disc cleaners or cleaning spray.

●Do not bend the CD-ROM or touch its mirror surface.

●Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from

direct sunlight.

What is the USB Connection Kit?

The USB connection kit is software packets that allow you to transfer images from the digital video camera

to a personal computer running the Windows®98/2000/Me or Macintosh operating system using the USB

cable.

Once you have transferred images from your camera to your computer, you can use the provided “Presto!

Mr. Photo Gold” to process, edit, and organize your images.

USB cable

CD-ROM

PROVIDED ACCESSORIES

When you open the packets, make sure that you have

everything. If something is missing or damaged, contact

your dealer or JVC customer service.

EN 5

USB

SECTION FOR Windows®

Connection

●Connect the camera directly to the USB on the

computer. The camera may not operate properly

if it is connected to a USB hub.

●Use only the provided USB cable; do not use an

extension cable.

●We recommend that you use the AC Power

Adapter/Charger.

Digital video camera

USB cable

(provided)

Operating Environment

The host computer that runs the Windows®

operating environment must satisfy the following

conditions.

USB Driver

1. Microsoft®Windows®98 (pre-installed)/

Microsoft®Windows®98 Second Edition (pre-

installed)

2. USB connector

3. CD-ROM drive

* The system requirements information is not a

guarantee that provided software applications will

work on all personal computers meeting those

requirements.

* Microsoft®, Windows®are either registered

trademarks or trademarks of Microsoft corporation

in United States and/or other countries.

* Other trademarks are property of their respective

owners.

NOTE:

●

If you are using Windows

2000 Professional/

Windows

Me, the information file (.inf) that is

needed in order to install the standard driver that

is provided with the OS is provided in this packet.

To USB

Windows®PC

6EN

SECTION FOR Windows

(cont.)

Installing the Software

(For Windows®98)

For details on the basic operation of Windows®98,

refer to the instruction manual provided with your

computer or Windows®98.

Preparation

Start Windows®98.

●If you are running other software, close that

software. (Make sure that there are no other

application icons open on the task bar.)

Turn the camera’s POWER switch to “ ”.

Press the “MEMORY PLAY” button on the

camera.

Connect the camera to the computer using

the provided USB cable. (Zpg. 5)

•The “Add New Hardware Wizard” window

will appear.

•“USB MODE” appears on the LCD panel.

Load the provided CD-ROM to the CD-ROM

drive.

Click the “Next” button.

Confirm that “CD-ROM drive” has been

checked, then click the “Next” button.

•When the loaded CD-ROM is not found,

click “Browse” button and select the

provided CD-ROM.

Click the “Next” button.

Click the “Finish” button.

EN 7

Installing the Software

(For Windows®2000)

For details on the basic operation of

Windows®2000, refer to the instruction manual

provided with your computer or Windows®2000.

Preparation

Start Windows®2000.

●If you are running other software, close that

software. (Make sure that there are no other

application icons open on the task bar.)

Turn the camera’s POWER switch to “ ”.

Press the “MEMORY PLAY” button on the

camera.

Connect the camera to the computer using

the provided USB cable. (Zpg. 5)

•The “Add New Hardware Wizard” window

will appear.

•“USB MODE” appears on the LCD panel.

Load the provided CD-ROM to the CD-ROM

drive.

Click the “Next” button.

Confirm that “CD-ROM drive” has been

checked, then click the “Next” button.

•When the loaded CD-ROM is not found,

click “Browse” button and select the

provided CD-ROM.

Click the “Next” button.

Click the “Finish” button.

8EN

SECTION FOR Windows

(cont.)

Installing the Software

(For Windows®Me)

For details on the basic operation of Windows®Me,

refer to the instruction manual provided with your

computer or Windows®Me.

Preparation

Start Windows®Me.

●If you are running other software, close that

software. (Make sure that there are no other

application icons open on the task bar.)

Turn the camera’s POWER switch to “ ”.

Press the “MEMORY PLAY” button on the

camera.

Connect the camera to the computer using

the provided USB cable. (Zpg. 5)

•The “Add New Hardware Wizard” window

will appear.

•“USB MODE” appears on the LCD panel.

Load the provided CD-ROM to the CD-ROM

drive.

Click the “Next” button.

Select the “JVCDSCME.INF” in the “ME”

folder, and click the “OK” button.

Click the “Finish” button.

EN 9

Copying Print Frame Images from the

Computer to the Digital Video Camera

For details on the basic operation of Windows®98/

2000/Me, refer to the instruction manual provided

with your computer or Windows®98/2000/Me.

Preparation

Start Windows®98/2000/Me.

●Insert the memory card into the camera.

Turn the camera’s POWER switch to “ ”.

Press the “MEMORY PLAY” button on the

camera.

Connect the camera to the computer using

the provided USB cable. (Zpg. 5)

•“USB MODE” appears on the LCD panel.

Double click on the “My Computer” icon.

•If the camera is connected to the computer

properly, the “Removable Disc” icon

appears. The “Removable Disc” icon allows

you to check the image data in the camera.

Copy the desired files from the “TITLES”

folder on the provided CD-ROM to “Remov-

able Disc”.

•For details on the print frame image, see

page 14 – 15.

•To copy all of the images, copy the “TITLES”

folder (38 images) from the CD-ROM to the

memory card in the camera.

•To copy only some of the images, create a

New Folder named “TITLES” in the memory

card in the camera and then copy just the

images that you want into the folder.

Copying Image Data from the Digital

Video Camera to the Computer

For details on the basic operation of Windows®98/

2000/Me, refer to the instruction manual provided

with your computer or Windows®98/2000/Me.

Preparation

Start Windows®98/2000/Me.

●Insert the memory card into the camera. Make

sure in advance that the memory card contains

data which you want to copy onto the PC.

Turn the camera’s POWER switch to “ ”.

Press the “MEMORY PLAY” button on the

camera.

Connect the camera to the computer using

the provided USB cable. (Zpg. 5)

•“USB MODE” appears on the LCD panel.

Double click on the “My Computer” icon.

•If the camera is connected to the computer

properly, the “Removable Disc” icon

appears. The “Removable Disc” icon allows

you to check the image data in the camera.

Double click the “Removable Disc” icon and

copy the desired files from the still image data

folder.

●Note to Windows®2000/Me Users

Perform the following operation when disconnect

the USB cable.

1. Double click on the “Unplug or Eject Hard-

ware” icon displayed on the task bar.

2. Select “JVC DV CAMERA” and click the “Stop”

button on the “Unplug or Eject Hardware”

window.

3. Click the “OK” button on the “Stop a Hard-

ware device” window.

NOTES:

●

Always initialize a Memory Card (a MultiMediaCard or an SD Memory Card) before using it with the

digital video camera. (For details on the initialization procedure, refer to the digital video camera’s

manual.)

If the camera is connected to a personal computer through the USB interface, there are circumstances in

which it might not be possible to read or write files.

●

When a file is being accessed from a personal computer, the message “ACCESSING FILE” is displayed on

the LCD panel on the camera. Never disconnect the USB cable while this message is displayed.

●

Disconnect the USB cable and then turn the computer off or operate the Power dial on the camera.

10 EN

SECTION FOR Macintosh

USB

Digital video camera

USB cable

(provided)

Connection

●Connect the camera directly to the USB port on

the computer. The camera may not operate

properly if it is connected to a USB hub.

●Use only the provided USB cable; do not use an

extension cable.

●We recommend that you use the AC Power

Adapter/Charger.

Operating Environment

The host computer that runs the Macintosh

operating environment must satisfy the following

conditions.

USB Driver

1. Mac OS 8.5.1/Mac OS 8.6 environment on an

iMac, iBook, Power Macintosh G3/Power Mac

G4, or PowerBook G3

2. Standard USB connector

* The system requirements information is not a

guarantee that provided software applications will

work on all personal computers meeting those

requirements.

* Macintosh is a registered trademark of Apple

Computer, Inc.

* Other trademarks are property of their respective

owners.

NOTES:

●

If you are using Mac OS 9 on one of the above

computers, you do not need to use this driver;

you can use the standard driver that is provided

with the OS.

●

Install the Macintosh Update if necessary. For

details, visit Apple Computer’s website at

http://www.apple.com/

To USB port

Macintosh computer

Inhaltsverzeichnis

Andere JVC Software Handbücher

JVC

JVC Digital Photo Navigator ImageMixer with VCD... Bedienungsanleitung

JVC

JVC GZ-HM960BUS Bedienungsanleitung

JVC

JVC Blank Media LYT1015 Bedienungsanleitung

JVC

JVC LYT1361-001A Bedienungsanleitung

JVC

JVC ImageMixer 1.7 LYT1282-001A Bedienungsanleitung

JVC

JVC GY-DV300U - 1/3" 3-ccd Dv Camcorder Leitfaden

JVC

JVC ProHD Log Bedienungsanleitung

JVC

JVC VN-S200U Bedienungsanleitung

JVC

JVC VN-S400U Bedienungsanleitung

JVC

JVC GR-DVL505U Bedienungsanleitung

JVC

JVC Digital Photo Navigator LYT1361-012A Bedienungsanleitung

JVC

JVC GR-DVL500U - Digital Camcorder Bedienerhandbuch

JVC

JVC GV-LS2 Bedienungsanleitung

JVC

JVC RECORDING SOFTWARE VN-RS800U Bedienungsanleitung

JVC

JVC PC Connection Kit Bedienungsanleitung

JVC

JVC GZ MG21 - Everio Camcorder - 800 KP Bedienungsanleitung

JVC

JVC GR-SXM340U Bedienungsanleitung

JVC

JVC GV-LS2 Bedienungsanleitung

JVC

JVC GR-D390UC /connections Leitfaden

JVC

JVC GY-HM700U - Prohd Compact Shoulder Solid State... Bedienungsanleitung

JVC

JVC GR-DVM90U Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung