JVC TH-BY370A Bedienungsanleitung
Soundbar: Under the TV(if wall-mounted)/ In front of the TV
Subwoofer: On the floor, alongside the TV (or in the front corner of
the room)
RECOMMENDED PLACEMENT
2.1 CH SOUNDBAR
This product is not a toy! Children should be supervised to ensure that they do not
play
15.When removing the power plug from the wall outlet, always pull directly on the plug;
with liquids; do not place unit on windowsills or other places where it may be
Using the remote control:
1. Battery spec: 2 x AAA, place the battery into the battery compartment,
ensuring correct polarity. After inserting the battery, replacethe battery
compartment cover.
2. Remove the battery, if the remote control will not be used for a longer
period of time as it mightbe damaged by leaking batteries.
1.POWER
Switch the unit between ON and STANDBY
mode
2. PREV
Play previous song, or choose previous mode
3. VOL-
Reduce the volume
4. NEXT
When playing music, it goes tothe next song, or
when selecting modes, choose the next mode
5. MODE
The choices are: B/T,OPT, COA,AUX, FM; If
you plug in a USB device, the options would be:
"B/T, USB,OPT, COA, AUX, FM"
6. TREBLE-
Reduce treble
7. REPEAT
In USB mode, press ‘REPEAT’ button once to
repeat a single song ; press again to repeat all
songs
8. BASS-
Reduce bass
9. EQ
Sound mode switch
10. RESET
Press to go back to the initial default
settings
11. TUNING-
Press and release to tune channels
manually. Press and hold to enter half
auto channel state where it auto tunes
to the available lower frequency
12. PLAY/PAUSE
Play music/ Pause music
13. MUTE
No sound
14. VOL+
Increase the volume
15. TREBLE+
Increase treble
16. BASS+
Increase bass
17. 3D
3D sound effect switch
18. TUNING+
Press and release totune channels manually.
Press and hold to enter half auto channel
state where it auto tunes to the available
higher frequency.
19. FM SCAN
Press to auto search available channels
Do not impede ventilation by covering ventilation
openings with cloths, curtains or similar items.
openings with cloths, curtains or similar items.
16. Do not expose the batteries to excessive heat, direct sunlight, fire or similar.
17. Do not throw used batteries in your household rubbish. Dispose of it responsibly according
to local regulations.
Front/ Back panels
Operating Instructions
1. POWER ON: Turn on the power switch on the back of the sound bar; the
sound bar and subwoofer will now be in Standby mode. The indicator light on
the front panel shows red.
2. ON/ STANDBY: Press the ‘STANDBY’ button on the front of the sound bar
OR the ‘POWER’ button on the remote control to switch on the unit. The
indicator light shows blue.
Bluetooth Mode:
1. Press the ‘MODE’ button repeatedly until Bluetooth Mode is selected. Display
shows BLUE.
2. On your Bluetooth-enabled device, choose ‘TH-BY370A’, the name of the
sound bar. The indicator blinks indicating that it is pairing and there is a beep
sound. Once pairing is successful, the indicator remains on.
3. Now you can play music from your Bluetooth-enabled device on the sound
bar. Press the ‘PREV/ ‘NEXT’ button on the remote control to play the
previous or next song.
USB Mode:
1. Connect a USB memory device to the USB port.
2. Press the ‘MODE’ button repeatedly until USB Mode is selected. Display
shows ‘USB’.
3. Now you can play music from the USB device on the sound bar.
Notes:
In any working state, the mode automatically switches to USB when the USB
device is plugged in.
The music will be played in the same order as on the USB disk. If song
numbers are assigned, you can use numeric buttons on remote control to play
a particular song.
The USB device must be formatted in “FAT 16/FAT32/EXFAT”, maximum
size of device possible is 32G.
Only mp3 formats can be played.
Optical/ Coaxial/AUX mode:
1. Connect the device using any of these modes.
2. Press MODE button repeatedly until the corresponding mode is selected.
Display shows ‘OPT’/ ‘COA’/ ‘AUX’.
3. Now you can play music from the connected device on the sound bar.
FM Radio function:
1. Press ‘MODE’ button repeatedly until ‘FM’ mode is selected. The display
shows station frequency.
2. Press ‘FM SCAN’ on the remote control to auto search the available
channels. These channels are stored in working state.
3. Press ‘TUNING -‘ and ‘TUNING +’ buttons to tune channels manually.
4. Press and hold ‘TUNING -‘ or ‘TUNING + ’ buttons to enter half auto search
channel state. Here, it searches the available frequencies and stops at the
next lower (TUNING-) or higher (TUNING+) frequency.
4. Important: Do not exceed current 500mA.
Inhaltsverzeichnis
Andere JVC Lautsprechersystem Handbücher
JVC
JVC CA-HXC6 Bedienungsanleitung
JVC
JVC FS-G5 Bedienungsanleitung
JVC
JVC MX-KC50 Bedienungsanleitung
JVC
JVC SX-WD5 Bedienungsanleitung
JVC
JVC UN-AD8 Bedienungsanleitung
JVC
JVC GVT0244-008A Bedienungsanleitung
JVC
JVC MX-J100 Bedienungsanleitung
JVC
JVC ca-mxkb4 Kurzanleitung
JVC
JVC CA-MXKC38 Bedienungsanleitung
JVC
JVC MX-KA3 - Mini Shelf System Bedienungsanleitung
JVC
JVC MX-J300 Bedienungsanleitung
JVC
JVC CA-MXJD8 Bedienungsanleitung
JVC
JVC LVT0347-001A Bedienungsanleitung
JVC
JVC SX-LC33MK2 Bedienungsanleitung
JVC
JVC CA-D672TR Bedienungsanleitung
JVC
JVC SX-L3WD Bedienungsanleitung
JVC
JVC NXCDR7 - Executive Microsystem Bedienungsanleitung
JVC
JVC Compact Component System CA-MXG51R Bedienungsanleitung
JVC
JVC GVT0277-019A Bedienungsanleitung
JVC
JVC FS-G5 Bedienungsanleitung
Beliebte Lautsprechersystem Handbücher anderer Marken
Electro-Voice
Electro-Voice S-122 Bedienungsanleitung
Sven
Sven SPS-619 GOLD Bedienungsanleitung
Pioneer
Pioneer CS-7070 Bedienungsanleitung
EAW
EAW UB82e Bedienungsanleitung
Sondpex
Sondpex Active Speaker System and Digital Music... Bedienungsanleitung
Marshall Amplification
Marshall Amplification AR-DM61-BT Bedienungsanleitung
