JVC UX-G45 Bedienungsanleitung

MICRO COMPONENT SYSTEM

UX-G45

—Consists of CA-UXG45 and SP-UXG45

INSTRUCTIONS

LVT1520-001A

[B]

UX-G45[B].BOOK Page 1 Friday, February 10, 2006 1:03 PM

G-1

Warnings, Cautions and Others

IMPORTANT for the U.K.

DO NOT

cut off the mains plug from this equipment. If the

plug fitted is not suitable for the power points in your home

or the cable is too short to reach a power point, then obtain

an appropriate safety approved extension lead or consult

your dealer.

BE SURE

to replace the fuse only with an identical

approved type, as originally fitted.

If nonetheless the mains plug is cut off ensure to remove the

fuse and dispose of the plug immediately, to avoid a possible

shock hazard by inadvertent connection to the mains supply.

If this product is not supplied fitted with a mains plug then

follow the instructions given below:

IMPORTANT:

DO NOT

make any connection to the terminal which is

marked with the letter E or by the safety earth symbol or

coloured green or green-and-yellow.

The wires in the mains lead on this product are coloured in

accordance with the following code:

Blue: Neutral

Brown: Live

As these colours may not correspond with the coloured

markings identifying the terminals in your plug proceed as

follows:

The wire which is coloured blue must be connected to the

terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the

terminal which is marked with the letter L or coloured red.

IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.

CAUTION

•Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a

newspaper or cloth, etc., the heat may not be able to get

out.)

•Do not place any naked flame sources, such as lighted

candles, on the apparatus.

•When discarding batteries, environmental problems must

be considered and local rules or laws governing the

disposal of these batteries must be followed strictly.

•Do not expose this apparatus to rain, moisture, dripping or

splashing and that no objects filled with liquids, such as

vases, shall be placed on the apparatus.

UX-G45[B].BOOK Page 1 Friday, February 10, 2006 1:03 PM

G-2

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the

unit; leave all servicing to qualified service personnel.

3. CAUTION: VISIBLE AND / OR INVISIBLE CLASS 1M LASER RADIATION WHEN

OPEN. DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL

INSTRUMENTS.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT.

Caution: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:

1. Front: No obstructions and open spacing.

2. Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.

3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm

or more.

About the cooling fan

A cooling fan is mounted on the rear panel of the unit to prevent abnormal temperature inside the unit, thus assuring normal

operation of the unit. The cooling fan automatically starts rotating to intake external cool air when the volume is increased up

to more than a certain level.

10 cm

15 cm

1 cm

15 cm

15 cm 1 cm 15 cm

15 cm

Front Side

SP-UXG45

CA-UXG45

SP-UXG45 CA-UXG45

UX-G45[B].BOOK Page 2 Friday, February 10, 2006 1:03 PM

G-3

SAFETY INSTRUCTIONS

“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”

This equipment has been designed and manufactured to meet international safety standards but, like any

electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

Do read the operating instructions before you attempt to use the equipment.

Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between

pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and

withdraw the mains plug when making or changing connections.

Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

Do be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in

any way—switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for

unattended operation or has a standby mode.

Switch off using the switch on the equipment and make sure that your family know how to do this.

Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of

traffic safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.

Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws—to ensure complete safety always fit the

manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

–NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case

—this could result in a fatal electrical shock.;

– NEVER guess or take chances with electrical equipment of any kind—it is better to be safe than sorry!

✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮

UX-G45[B].BOOK Page 3 Friday, February 10, 2006 1:03 PM

Contents

Introduction .................................................... 2

Precautions...................................................................... 2

How to Read This Manual.............................................. 3

Getting Started ............................................... 4

Step 1: Unpack................................................................ 4

Step 2: Prepare the Remote Control ............................... 4

Step 3: Hook Up ............................................................. 5

Before Operating the System ........................ 8

Daily Operations—Playback ......................... 9

Listening to the Radio................................................... 10

Playing Back a Disc...................................................... 11

Playing Back from the USB Memory or

Digital Audio Player ................................................. 11

Playing Back Other Equipment .................................... 13

Quick Portable Link (QP Link) .................................... 13

Daily Operations—Sound &

Other Adjustments ................................... 14

Adjusting the Volume................................................... 14

Adjusting the Sound ..................................................... 14

Changing the Display Brightness—DIMMER............. 15

Setting the Clock .......................................................... 15

Turning Off the Power Automatically.......................... 16

Advanced Radio Operations ....................... 17

Receiving FM Stations with Radio Data System ......... 17

Searching for a Program by PTY Codes....................... 17

Switching Temporarily to a Program of

Your Choice Automatically ...................................... 18

Advanced Disc/USB Memory/

DAP Operations ........................................ 19

Programming the Playing Order—Program Play......... 19

Playing at Random—Random Play .............................. 20

Playing Repeatedly—Repeat Play................................ 21

Prohibiting Disc Ejection—Child Lock ....................... 21

Timer Operations ......................................... 22

Setting the Timer .......................................................... 22

Additional Information ............................... 24

Learning More about This System ............................... 24

Troubleshooting............................................................ 25

Maintenance.................................................................. 26

Specifications................................................................ 26

Parts Index .................................................................... 27

UX-G45[B].BOOK Page 1 Thursday, March 2, 2006 4:26 AM

Introduction

Thank you for purchasing the JVC Micro Component

System.

We hope it will be a valued addition to your home, giving

you years of enjoyment.

Be sure to read this instruction manual carefully before

operating your new stereo system.

In it you will find all the information you need to set up and

use the system.

If you have a query that is not answered by the manual,

please contact your dealer.

Precautions

Installation

• Install in a place which is level, dry and neither too hot nor

too cold—between 5°C and 35°C.

• Install the System in a location with adequate ventilation to

prevent internal heat buildup inside the System.

• Leave sufficient distance between the System and the TV.

• Keep the speakers away from the TV to avoid interference

with TV.

Power sources

• When unplugging the System from the wall outlet, always

pull on the plug, not the AC power cord.

Moisture condensation

Moisture may condense on the lenses inside the System in

the following cases:

• After starting to heat the room

• In a damp room

• If the System is brought directly from a cold to a warm

place

Should this occur, the System may malfunction. In this case,

leave the System turned on for a few hours until the moisture

evaporates, unplug the AC power cord, then plug it in again.

Internal heat

• A cooling fan is mounted on the rear panel to prevent heat

buildup inside the main unit (see page G-2).

Others

• Should any metallic object or liquid fall into the System,

unplug the AC power cord and consult your dealer before

operating any further.

• If you are not going to operate the System for an extended

period of time, unplug the AC power cord from the wall outlet.

If anything goes wrong, unplug the AC power cord and

consult your dealer.

DO NOT install the System in a location near

heat sources, or in a place subject to direct

sunlight, excessive dust or vibration.

DO NOT handle the AC power cord with wet

hands.

For safety, observe the following carefully:

• Make sure there is good ventilation around

the main unit. Poor ventilation could

overheat and damage the System.

• DO NOT block the cooling fan and the

ventilation openings or holes. If they are

blocked by a newspaper or cloth, etc., the

heat may not be able to get out.

DO NOT disassemble the System since there

are no user serviceable parts inside.

UX-G45[B].BOOK Page 2 Thursday, March 2, 2006 4:26 AM

How to Read This Manual

To make this manual as simple and easy-to-understand as

possible, we have adapted the following methods:

• Button and control operations are explained as listed in the

table below. In this manual, the operations using the

remote control is mainly explained; however, you can use

the buttons and controls on the main unit if they have the

same (or similar) name and marks.

•

Some related tips and notes are explained later in the

sections “Learning More about This System” and

“Troubleshooting,” but not in the same section

explaining the operations.

If you want to know more about

the functions, or if you have a doubt about the functions, go

to these sections and you will find the answers.

Indicates that you press the button

briefly

Indicates that you press the button

briefly and repeatedly

until an option

you want is selected.

Indicates that you press one of the

buttons.

Indicates that you

press and hold

the

button for specified seconds.

• The number inside the arrow

indicates the period of press (in this

example, 2 seconds).

• If no number is inside the arrow,

press and hold until the entire

procedure is complete or until you

get a result you want.

Indicates that you turn the control

toward the specified direction(s).

Indicates that this operation is only possible

using the remote control.

Indicates that this operation is only possible

using the buttons and controls on the main

unit.

2sec.

Remote

ONLY

Main Unit

ONLY

UX-G45[B].BOOK Page 3 Thursday, March 2, 2006 4:26 AM

Getting Started

Step 1: Unpack

After unpacking, check to be sure that you have all the

following items. The number in parentheses indicates the

quantity of each piece supplied.

• FM antenna (1)

• AM loop antenna (1)

• Remote control (1)

•Batteries(2)

If any item is missing, consult your dealer immediately.

Step 2: Prepare the Remote Control

Insert the batteries into the remote control by matching the

polarity (+ and –) correctly.

EXT

GND

LOOP

Step 1:Unpack the package and

check the accessories.

Step 2: Prepare the remote control.

Step 3: Hook up the components such

as AM/FM antennas, speakers,

etc. (see pages 5 to 7).

Finally plug the AC power cord.

Now you can operate the System.

• DO NOT use an old battery together with a

new one.

• DO NOT use different types of batteries

together.

• DO NOT expose batteries to heat or flame.

• DO NOT leave the batteries in the battery

compartment when you are not going to use

the remote control for an extended period of

time. Otherwise, the remote control will be

damaged from battery leakage.

R6(SUM-3)/AA(15F)

UX-G45[B].BOOK Page 4 Thursday, March 2, 2006 4:26 AM

Step 3: Hook Up

If you need more detailed information, see page 7.

For more detailed information on connecting external equipment, see page 13.

EXT

GND

LOOP

Illustrations of the input/output terminals below are typical

examples.

When you connect other components, refer also to their

manuals since the terminal names actually printed on the rear

may vary.

Turn the power off to all components before connections.

To a wall outlet

Plug the AC power cord only after all connections are complete.

Disconnect the supplied FM antenna, and connect to an outdoor FM antenna

using a 75 Ωwire with coaxial type connector (IEC or DIN45325).

Vynile-covered wire (not supplied)

Extend it horizontally.

AM loop antenna

Keep it connected.

For better FM/AM reception

Outdoor FM

antenna

(not supplied)

UX-G45[B].BOOK Page 5 Thursday, March 2, 2006 4:26 AM

EXT

GND

LOOP

FM antenna (supplied)

Extend it so that

you can obtain the

best reception.

AM loop antenna (supplied)

Turn it until the best reception is

obtained.

Non-striped

Black striped

UX-G45[B].BOOK Page 6 Thursday, March 2, 2006 4:26 AM

Andere Handbücher für UX-G45

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JVC Lautsprechersystem Handbücher

Beliebte Lautsprechersystem Handbücher anderer Marken

LG NB4532B Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung

JBL

JBL gto6506c Bedienungsanleitung

Legacy

Legacy FOCUS SE Bedienungsanleitung