jWIN JD-C3215 Bedienungsanleitung
E
ENGLISH
Digital Camera >>
2-E
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation
Note: This equipment has been tested and found to comply with the limits for
Class B digital devices, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Use of shielded cable is required to comply with Class B limits in Subpart B of
Part 15 of the FCC rules. Do not make any changes or modifications to the
equipment unless otherwise specified in the manual. If such changes or
modifications should be made, you could be required to stop operation of the
equipment.
User’s Manual >>
E-3
TRADEMARK INFORMATION
Microsoft®and Windows®are U.S. registered trademarks of Microsoft
Corporation.
Pentium®is a registered trademark of Intel Corporation.
Macintosh is a trademark of Apple Computer, Inc.
SDTM is a trademark.
Other names and products may be trademarks or registered trademarks of
their respective owners.
READ THIS FIRST
Notice:
1. Product design and specifications are subject to change without notice.
This includes primary product specifications, software, software drivers,
and user’s manual. This User Manual is a general reference guide for the
product.
2. The product and accessories that come with your camera may be different
from those described in this manual. This is due to the fact that different
retailers often specify slightly different product inclusions and accessories
to suit their market requirements, customer demographics, and geographical
preferences. Products very often vary between retailers especially with
accessories such as batteries, chargers, AC adapters, memory cards, cables,
carrying cases/pouches, and language support. Occasionally a retailer will
specify a unique product color, appearance, and internal memory capacity.
Contact your dealer for precise product definition and included accessories.
3. The manufacturer assumes no liability for any errors or discrepancies in
this user’s manual.
4. For driver updates and revisions to this manual, please refer to our website.
Digital Camera >>
4-E
WARNINGS
Do not expose the camera to moisture and make sure no water gets into
the camera. Take particular care when using the camera under extreme
weather conditions, such as rain or snow, or when operating the camera at
the beach or near water. Avoid using this camera in places subject to extreme
moisture. Do not use the camera if water has entered the camera. Turn the
camera off and remove the batteries. Contact your dealer or authorized
service facility. Do not continue to use the camera as this may cause a fire
or an electrical shock.
Do not use the camera if any foreign objects have entered the camera.
Turn the camera off and remove the batteries. Contact your dealer or
authorized service facility. Do not continue to use the camera as this may
cause a fire or an electrical shock.
Do not place the camera in an unstable location such as on a wobbly table
or sloping surface where the camera may fall or tip over and cause injury. If
the camera has been dropped or damaged, turn the camera off and remove
the batteries. Contact your dealer or authorized service facility. Do not
continue to use the camera as this may cause a fire or an electrical shock.
Do not insert or drop metallic or other foreign objects into the camera through
access points such as the memory card slot. This may cause a fire or an
electrical shock.
Do not attempt to modify this camera. Do not remove the camera casing.
This may cause a fire or an electrical shock. Internal inspection and repairs
should only be carried out by an authorized service facility.
Never operate this camera in any way while driving a vehicle. This may
cause a traffic accident.
User’s Manual >>
E-5
CAUTIONS
Do not place this camera in a location affected by oil fumes or steam, such
as near a cooking stove or humidifier. This may cause a fire or an electrical
shock.
Do not leave this camera in a location subject to extremely high temperatures,
such as in a sealed vehicle or in direct sunlight. Exposure to high
temperatures may adversely affect the camera case and internal
components and may cause a fire.
Do not cover or wrap the camera with a cloth or quilt. This may cause heat
to build up and distort the camera case and cause a fire. Always use the
camera and accessories in well-ventilated locations.
Handle the camera carefully and do not expose the camera to shock or
vibration. Handling the camera roughly may cause a malfunction.
Do not use batteries other than those specified for use with your camera.
Use of unsuitable batteries may result in the batteries splitting, or leaking
and may cause a fire, injury, or soiling of the battery compartment.
When placing the batteries into the camera, check the polarity markings on
the batteries ( - and + ) to ensure that the batteries are inserted correctly.
Incorrect battery polarity will result in camera inoperability and may result
in the batteries splitting or leaking and causing a fire, injury, or soiling of the
battery compartment.
Remove the batteries if the camera will not be used for an extended period
of time. The batteries may leak and cause a fire, injury or soiling of the
battery compartment. If the batteries leak, clean and wipe the battery
compartment carefully and install new batteries. Wash your hands carefully
if you touch the battery fluid.
Digital Camera >>
6-E
CONTENTS
8 INTRODUCTION
8 Overview
9 Package Contents
10 GETTING TO KNOW YOUR CAMERA
10 Front View
11 Rear View
12 Mode Dial
13 LCD Monitor Icons
15 Button Functions
16 GETTING STARTED
16 Installing Batteries
17 Using an AC Power Adapter (optional accessory)
18 Inserting an SD Memory Card (optional accessory)
19 Attaching the Hand Strap
19 Turning the Power On/Off
20 Language Selection
20 Setting the Date and Time
21 Setting Image Resolution and Quality
22 RECORD MODE
22 Taking Images
23 Shooting with Scenery-Matching
24 Digital Zoom
25 Self-timer
26 Flash
User’s Manual >>
E-7
28 PLAYBACK MODE
28 Viewing Images
29 Zoom Playback
29 Displaying Thumbnail Images
30 Slideshow Display
31 Viewing on a Television
32 Deleting Images
34 Formatting Media
35 Copying the Contents of Internal Memory to a Memory Card
36 Changing the Camera Startup Logo
37 Setting the DPOF
38 Protecting Images
39 MOVIE MODE
39 Recording Video Clips
40 Viewing Video Clips
41 TRANSFERRING RECORDED IMAGES AND VIDEOS TO YOUR
COMPUTER
42 Step 1: Installing the USB Driver
43 Step 2: Connecting the Camera to Your Computer
44 Step 3: Downloading Image and Video Files
45 INSTALLING PHOTOSUITE
46 INSTALLING PHOTOVISTA
47 MENU OPTIONS
47 The Basis of the Menu Operation
48 OSD Menus
53 CONNECTING THE CAMERA TO OTHER DEVICES
54 CAMERA SPECIFICATIONS
Digital Camera >>
8-E
INTRODUCTION
Overview
Your new digital camera delivers high quality, 2032 x 1520 resolution images
using a 3.0 Mega pixel imager. Using the 1.5" TFT color image LCD monitor,
you can compose images and then examine them in detail. An auto-flash sensor
automatically detects the shooting (lighting) conditions and determines whether
the flash should be used. This feature helps ensure that your images turn out
right.
16MB internal (built-in) memory lets you capture and store images without the
need for an additional memory card. However, you may wish to expand the
memory capacity (up to 512MB capacity) by using an external memory card.
In addition to still images, you can record short videos using the movie function.
Images you have taken can be downloaded to your computer using the USB
cable (USB driver required for Win 98 and Mac OS 8.6).You can enhance and
retouch your images on your computer by using the provided editing software,
or image editing software you may already own. You may share your images
with your friends via e-mail, in a report, or on a website.
The illustrations in this manual are for the purpose of explanation and
may differ from the actual setting of your camera.
User’s Manual >>
E-9
Package Contents
Carefully unpack your camera and ensure that you have the following items:
Common Product Components:
Digital Camera
USB cable
Video cable
Software CD-ROM
User’s manual
Camera strap
Common (Optional) Accessories:
Memory card
Camera pouch
Batteries
AC power adapter
Accessories and components vary by retailer.
Digital Camera >>
10-E
GETTING TO KNOW YOUR CAMERA
Front View
1. Shutter button
2. Mode dial
3. POWER Power button
4. Viewfinder
5. Lens cover/Lens
6. Flash
7. Self-timer LED
8. Battery cover
9. Terminal cover
- USB/VIDEO OUT terminal
- DC IN terminal
10. Strap eyelet
321
4
5
6
7
8
910
VIDEO OUT
DC IN 3V
Inhaltsverzeichnis
Andere jWIN Digitalkamera Handbücher
