König Electronic KN-CDPLAY130 Bedienungsanleitung
KN-CDPLAY130
(p. 2)
DIGITAL CONTROLLER
CD-ROM SUPPORT
(S. 11)
DIGITAL CONTROLLER
CD-ROM-UNTERSTÜTZUNG
(p. 20)
CONTRÔLEUR NUMÉRIQUE
AVEC PRISE EN CHARGE CD-ROM
(p. 29)
DIGITAAL BEDIENINGSPANEEL
CD-ROM ONDERSTEUNING
(p. 38)
CONTROLLER DIGITALE
COMPATIBILE CON CD-ROM
(p. 47)
CONTROLADOR DIGITAL
SOPORTE EN CD-ROM
(o. 56)
Digitális vezérlő
CD-ROM TÁMOGATÁSSAL
(s. 65)
DIGITAALINEN SÄÄDIN
CD-ROM-TUKI
(s. 74)
DIGITAL CONTROLLER
CD-ROM SUPPORT
(s. 83)
Digitální mixážní zařízení
S PODPOROU CD-ROM
(p. 92)
CONTROLER DIGITAL CU
SUPORT CD-ROM
Introduction:
This Digital Controller is small, but it is full with functions and possibilities such as USB Master,
USB Midi, CD-ROM/MP3 fully function support. The big jog wheel in the middle creates sound
effects such as scratch and brakes easily. The KN-CDPLAY130 has a graphic display for fast and
clear overview. This controller is made by DJ‘s for DJ‘s.
Description back view:
1. USB Port (for External USB storage device)
i. The unit supports FAT formatted USB storage device and rst partition only.
ii. Maximum length of a single track must not exceed 99 minutes.
2. USB Port (for PC Link)
USB connect socket for PC software Link.
3. LINE OUT (Output Jacks)
The audio from each CD player is output from these jacks. Connect to the line input of the mixer.
4. DIGITAL OUT
The digital from each CD player is output from these jacks. Connect to the line input of the D/A
Amplier.
5. Fader Start
This connector is used for fader start; connect it to a mixer, and remote control the „START/
PAUSE“ by moving the fader of mixer.
6. Relay
This connector is used for connecting to another CD player to allow Relay function to work.
7. DC INPUT
Connect the AC adaptor plug in the DC input connector of the CD player before plugging the AC
adapter on the 0V power net.
8. Power Switch
3
Description top view:
1. Start / Brake:
Turning the control knob to control the Start/Brake time.
Time range: 0-8 seconds, adjust unit: 0.1sec.
2. RELAY (not available at this stage)
Press the „RELAY“ button to activate. When one unit is in „play“ mode, and the other unit is in
„pause“ mode; pause the playing unit, the other unit will automatically start to play (the button will
blink).
3. DUMP (not available at this stage)
It is similar to Reverse effects. As it switches On, music plays backwards, but when it switches off,
music backs to normal playing from the rst play position. For example, start Dump from 00:40
and cancel at 00:35, the music backs to play from 00:45.
The Dump buffer time is about 15 seconds, if there is no more buffer, the music stops DUMP.
In auto Mode, user is able to select the range of the DUMP time, (1//4/8 of BPM). Please switch
Auto/Manual mode from Menu.
4. REVERSE:
The music plays backwards. This sound effect can be performed independently, or in parallel with
other effect.
5. SCRATCH:
Move the JOG Wheel backward or forward like scratching a turntable record. This sound effect
can be performed independently, or in parallel with other effect.
4
6. BOP BUTTON
The playback will automatically play from the CUE point upon the button is pressed.
7. CUE BUTTON
The cue function allows the CD returning to the memorized point. In PAUSE mode, pressing the
CUE button to set the cue point, and the CUE button blinks; in PLAY mode, press this button to
pause the unit at the memorized point.
8. PLAY/ PAUSE BUTTON
Each press of this button causes the operation to change between PLAY and PAUSE modes.
9. HOT-CUE
This unit will allow you to play from 3 cue points instantly.
a. Set CUE memory: Press the MEMO button rst, and then press the CUE button to complete
the CUE setting, then this CUE button will light up.
b. Play „CUE“ memory: Upon pressing specic CUE button, it will ash about 5 seconds.
10 TIME BUTTON
This button switches the time display between total remaining time, each remaining time and
elapsed playing time.
11. CONT./SINGLE BUTTON
Press this button to switch between auto cue single and continue. The selected mode is indicated
on the display.
*AUTO CUE SINGLE - After each track, the unit pauses at the beginning of next track. The
playback starts from audible point.
*CONTINUE -To play all tracks continually.
12. Title
Switch of File name / Title / Album / Artist Display.
For MP3 les only
13. Menu
Main Menu
Item1. SOURCE
SOURCE
1. CD
. USB
3. HID
Item. CUE STORAGE
CUE STORAGE
1. STORE
. RECALL
3. ALL CLEAR
1. STORE
CUE STORAGE display information
CUE STORE
Serial numbers: 00
Spare: 168
5
2. RECALL
Select the store Cue number by Track knob, and display will show stored Cue points information
on the display. Press the Track knob (Enter) to conrm the selection.
CUE RECALL
Total: 099 Numbers: 00
M-CUE: 09 03 : 1 : 1
A-CUE: 0 01 : 00 : 00
B-CUE: 0 01 : 08 : 00
CUE-1: 03 0 : 0 : 0
CUE-: 06 0 : 0 : 0
CUE-3: 1 0 : 0 : 0
3. ALL CLEAR =>
1.NO => Exit.
.YES => Clear All, and Exit.
CUE ALL CLEAR
1. NO
. YES
Item3. NEXT TRACK Fader Time range selet.
FADER TIME
1. 0 Sec
. 1 Sec
3. Sec
4. 3 Sec
Item4. DUMP => Mode select for DUMP
DUMP
1. Manual
. Auto
. Dump Auto mode range select:
DUMP Auto
1. 1 beat
. beat
3. 4 beat
4. 8 beat
6
Item5. REMOTE CONTROL
REMOTE CONTROL
1. Fader start
. Tack
3. Lock
Item6. PROG TRACK CLEAR
PROG TRACK CLEAR
1. NO
. YES
Item7. VERSION
VERSION
SYSTEN VER: 00
MCU VER: 001
DSP VER: 001
MP3 VER: 001
OTG VER: 001
HID VER: 001
14. Seamless Loop
A => A point is able to record during PLAY and PAUSE mode. If B Point is recorded, and A point
re-set behind B-point, B-point will be cleared
B/EXIT
(1) No function if A-CUE is recorded.
() As A-CUE is recorded, press B button to complete Loop setting and start looping. Loop Circle
and text will be completely show.
Press B-Loop/EXIT button as looping, loop stops and A-LED, B-LED, RELOOP-LED stop ashing
and remain light on. Press B-loop/EXIT again to reset B point and looping starts again.
(3) A-Point time must be in front the B Point. If A point time sets after B point, B point will be
canceled.
(4) „mark“ shows on the time bar of LCD if B point is set.
A, B, RELOOP-LED ashing (1.0Hz) when looping started.
(5) Reloop: press the button to restart looping.
15. Edit: A/B point Edit (not available at this stage)
During Edit mode, press Edit to start Edit mode and choose A/B point for modication.
A/B LED ashes faster (4Hz) after Edit button pressed and press A/B button to adjust the record
point.
Press Edit button again to conrm the modication.
16. Track Knob/ Menu selection knob
a. In Play/Pause mode: Turn the knob to skip track immediately or press the knob to enter File
Select mode.
b. In Program/le select mode: Turn the knob to select the tracks and press down the knob to
conrm.
c. In Menu mode: Turn the knob to select the menu content and press down the knob to
conrm.
7
17. Back
Press the „back“ button to go to upper layer or hold the „back“ button for seconds to go to top layer.
CDDA: CD TEXT LIST
1. TRACK1 / CD TEXT
. TRACK / CD TEXT
3. TRACK3 / CD TEXT
4. TRACK4 / CD TEXT
5. TRACK5 / CD TEXT
6. TRACK6 / CD TEXT
7. TRACK7 / CD TEXT
8. TRACK8 / CD TEXT
Turning the Track knob to select track and press down the track knob to conrm the selection.
Press the „back“ button to go to upper layer or hold the „back“ button for seconds to go to top layer.
Press Back button to exit the Track select mode.
MP3 Mode
Turning the Track knob to select track and press down the track knob to conrm the selection.
Press the „back“ button to go to upper layer or hold the „back“ button for seconds to go to top layer.
Press Back button to exit the Track select mode.
MP3 File Structure:
ROOT
FOLDER-1
FOLDER-
TRACK1
TRACK
TRACK3
TRACK4
TRACK5
ROOT FOLDER NAME
FOLDER
MP3 les of the selected
FOLDER-
FOLDER-3
FOLDER-4
FOLDER-5
TRACK1
TRACK
TRACK3
TRACK4
TRACK5
8
18. Next Track
Preset Next playing track.
Under NEXT TRACK mode, playing track will end with cross fade effect and connect with NEXT
set track.
Press the Next track button to enter the Next track mode, and select the NEXT playing TRACK on
the display.
Hold the back button seconds to exit Next track mode.Turning the Track button to start play
NEXT TRACK immediately.
19. Program Program function is working under Pause mode only.
Press Program button to enter the program mode and Hold for second to exit.
PROG LIST
PROG-1
Press Program button in Program mode to conrm the track selection. Display will show the
Program list for 3 seconds and back to le select mode to continue the programming.
PROG LIST
0 I miss you...
PROG-
Note: Maximum program number: 99 tracks
20. SEARCH BUTTON
Press the buttons to Forward / Backward the track
21. KEY ON/OFF SWITCH
Press the button to switch KEY mode on or off.
KEY OFF: The display shows the „KEY“ in blinking, and the key changed according to the pitch
change.
l The key parameter adjustment is not in effect
l KEY ON: The „KEY“ lights on the display, turning the SCOPE knob to adjust the key. Slide the
pitch slider will also change the key.
22. ON/OFF BUTTON (PITCH)
Press the button to be PITCH ON mode, press it again on the PITCH ON mode, and blinks with
unit on the PITCH OFF mode.
23. PITCH BUTTON
Select the pitch change range from ±8%, ±16%, ±3%, ±100%. The playback speed will change
when you move the pitch control slider.
24 PITCH BEND + / - BUTTON
When each of the two CD players is playing, the pitch bend function allows the position of the
bass beat to be matched after the pitch has been adjusted. The pitch will automatically rise up to
+ 16% from the current setting while pressing the „+“ button. While pressing the „–“ button, the
pitch will automatically drop to - 16 % from current setting. With changing the pitch the position of
the beats can be matched.
9
25. PITCH CONTROL SLIDER
To match the choices of playback speed (8%,16%,3%,100% for CDDA, 8%, 16%, 3% for MP3),
you can choose what range you want between minimum (up side) and maximum (bottom side) by
moving the pitch control slider.
26. BPM BUTTON
You can get the BPM number automatically or manually. Pressing the BPM BUTTON for 3 seconds
to switch between auto and manual control. The BEAT will be shown on the display! Under the
manual mode, tap this button to get the beat value.
27. JOG WHEEL
l Speed Control
Rotating the wheel, in play mode, will change the playback speed accordingly. While rotating
clockwise, the player speed increase; rotating counterclockwise, the speed decrease.
l Scratch Effect (Scratch indicator lights)
SLEEP:
Leave the unit unused for 30 minutes; the machine will shut off automatically.
28. Open/Close
Declaration of conformity
We,
Nedis B.V.
De Tweeling 8
515MC ’s-Hertogenbosch
The Netherlands
Tel.: 0031 73 599 1055
Email: info@nedis.com
Declare that product:
Name: König Electronics
Model: KN-CDPLAY130
Description: Digital Controller CD-ROM support
Is in conformity with the following standards
EMC: EN 55013: 001+A1: 003+A:006
EN 5500: 00+A1:003
LVD: EN 61000-3-:000
EN 61000-3-3:1995+A1:001
Following the provisions of the 89/336/EEC and 73/3/EEC (93/68/EEC) directive.
‘s-Hertogenbosch, 10-01-008
Mrs. J. Gilad
Purchase Director
10
Safety precautions:
To reduce risk of electric shock, this product
should ONLY be opened by an authorized
technician when service is required.
Disconnect the product from mains and other equipment if a problem should occur. Do not expose
the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modications of the product or
damage caused due to incorrect use of this product.
General:
Designs and specications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
Attention:
This product is marked with this symbol. It means that used electrical and electronic
products should not be mixed with general household waste. There is a separate
collections system for these products.
Copyright ©
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Inhaltsverzeichnis
Sprachen:
Beliebte Aufnahmegeräte Handbücher anderer Marken
Strymon
Strymon NIGHTSKY Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung
Tews Technologies
Tews Technologies TPMC465 Bedienungsanleitung
Honeywell
Honeywell Excel 50 Bedienungsanleitung
SeaLevel
SeaLevel COMM+8.LPCI Bedienungsanleitung
Arturia
Arturia AUDIOFUSE STUDIO Bedienungsanleitung
