4
General Safety Information
Please note that our general mounting instructions must be followed at all times and
can be viewed online at https://k2-systems.com/en-US/downloads/documentation
T The equipment may only be installed and operated by
qualified and adequately trained installers.
T Prior to installation, ensure that the product complies
with on-site static loading requirements.
For roof-mounted systems, the roof load-bearing
capacity must always be checked.
T National and local building regulations and environmental
requirements must be adhered to.
T Compliance with health and safety regulations, accident
prevention guidelines and applicable standards are
required.
·Protective equipment such as safety helmet, boots and
gloves must be worn.
·Roofing works must be in accordance with roofing
regulations utilizing fall protection safeguards when
eaves height exceeds 3 m.
·At least two people must be present for the duration of
the installation work in order to provide rapid assistance
in the event of an emergency.
T K2 mounting systems are continuously developed and
improved and the installation process may thereby
change at any time. Prior to installation consult our
website at:
https://k2-systems.com/en-US/downloads/
documentation for up-to-date instructions.
We can send you the latest version on request.
T The assembly instructions of the module manufacturer
must be adhered to.
T Equipotential bonding/grounding/earthing between
individual parts is to be performed according to
country specific standards, as well as national laws and
regulations.
T At least one copy of the assembly instructions should
be available on site throughout the duration of the
installation.
T Failure to adhere to our general safety and assembly
instructions and not using all system components,
K2 is not liable for any resulting defects or damages. We
do not accept liability for any damage resulting in the use
of competitor’s parts. Warranty is excluded in such cases.
T If all safety instructions are adhered to and the system
is correctly installed, there is a product warranty
entitlement of 25 years! We strongly recommend
reviewing our terms of guarantee, which can be
viewed at https://k2-systems.com/en-US/downloads/
documentation
We will also send this information on request.
T Dismantling of the system is performed in reverse order
to the assembly.
T K2 stainless steel components are available in
different corrosion resistance classes. Each structure
or component must be carefully checked for possible
corrosion exposure.
