Kaiser Baas X Limited Edition Bedienungsanleitung

Complete User Guide

X Limited Edition

Action Camera

Join the social movement and follow us on

Contents

DISCOVER: ADVENTURE

Share your footage with us on social media

@KaiserBaas #KBdiscover

To view the entire Kaiser Baas

product range visit:

www.kaiserbaas.com

Disclaimers & Warnings

Product Diagram

Getting Started

Capture Videos

Capture Photos

Eect Settings

General Settings

Playback

Battery Guide

Maintenance

FAQ

Specications

Support

3 4

Disclaimers & Warnings

Before using your Kaiser Baas camera please

ensure you read and understand the following

product and safety precautions.

• DO NOT use the camera in water without

the waterproof case.

• ALWAYS check the waterproof case seal is

clean and free of debris prior to use in water.

• DO NOT attempt to open the camera or

modify it in any way. If the camera has

been opened the warranty will be void.

Maintenance and repairs should only be

performed by Kaiser Baas.

• DO NOT handle or charge the camera without

its waterproof case using wet hands. Failure

to observe this may result in damage to

camera and persons.

• ONLY recharge the camera battery using the

supplied USB cable.

• If using a wall charger, ensure that it is a

certied product for your region. AC Input:

100-240VAC 50/60Hz. DC Output: 5V 1A.

Only use a USB wall charger with suitable

approval and certication. Do not charge in

conditions outside of the 10°C - 45°C range.

If you do not know the voltage and current

of your charger, use the included cable to

charge from your computer.

• The camera should not be used in heat

exceeding 55°C (131°F).

• DO NOT drop, crush, pierce, bend, deform

or microwave the camera.

Before operating

please ensure

you have read

and understood

the safety

precautions

5 6

Product Diagram (Back)Product Diagram (Front)

Mode/Power Button

Menu/Record Button

Lens

MicroSD Card Slot

Micro HDMI Slot

Micro USB Port

Charge LED

Status/Power LED

LCD Screen

¼” Screw Mount

Battery Slot

Battery Door

7 8

Getting Started

Welcome to your new Kaiser Baas

Action Camera. Before you get started

capturing footage, please review the

User Guide carefully to ensure you

get the maximum performance out

of your camera.

Battery Charging

We recommend that you charge your

camera fully before use. A full charge

takes approximately 3 hours using a 5V

0.5A Charger.

The charge LED light on the top of the

camera will be RED when charging and

will be OFF when charged. For further

important information about the battery,

see the Battery Guide (page 20).

MicroSD Card Compatibility

Your camera requires a MicroSD Card

(not included). We recommend the use of

a brand name Class 10 or higher MicroSD

Card.

There is only one correct way to insert

the MicroSD card.

Do not force the card into the slot as it

may damage the camera and card. The

maximum card size is 32gb.

Format Card

Before you start recording for the rst

time, we recommend you format the

MicroSD card. The format option is found

in the General Settings Menu.

For information on how to navigate the

menu please see the Navigation Guide.

Firmware Update

Please check the kaiserbaas.com/support

page for the latest rmware for your

camera. The current rmware can be

found in the general settings page.

Power On/Off

To power ON your camera

1. Insert the battery into the camera.

2. Hold the Power/Mode button for

5 seconds until you see the Kaiser

Baas logo appear.

Navigation

Navigate the menus and camera modes

using the 2 top buttons found on your

camera.

The Power/Mode button toggles between

Video Recording, Photo Capture,

Playback Mode and Setting Mode. Click

the power button consecutively until your

desired mode appears on screen.

Hold the Record/Menu button for 2

seconds to enter into the setup menu. To

go back or return to previous menu, hold

the Record/Menu button for 2 seconds.

When you are in a menu, the Power/Mode

button scrolls down.

Use the Record/Menu button to conrm.

9 10

Capture Videos

Kaiser Baas cameras feature 2 key

modes; Video Recording Mode and

Photo Capture Mode. Both modes

feature dierent settings.

Video Mode

The default mode is Video Mode.

Click the Record button to start

recording.

When recording, the blue video LED

on the top of the camera will ash

continuously.

Video Settings

To access the Video Settings menu,

press and hold the Record/Menu button

for 2 seconds, and short press again

to conrm or click with the Power

Button consecutively until you reach

the Settings Mode.

Mode

Set which mode the camera is recording in.

Manual

This is the standard video recording mode.

Camera will record continuously until the

record button is pressed.

Looping

This allows you to record continuously

using footage intervals of 3/5/10 minutes.

The camera will delete the oldest loop

recording le and replace with the latest

recording when the Micro SD is full.

Auto Stop

This allows you to stop the video recording

automatically after your desired time of 1

Min/5 Min/10 Min/30 Min.

Video Resolution

Your action camera can be set to support

an array of resolutions and frame rates.

The higher the resolution, the greater the

detail and clarity of footage.

Higher frames-per-second (FPS) capture

more motion and appear smoother on

playback.

Video Quality

This setting lets you select the quality of

the videos. S.Fine is the highest quality

and largest le size. As you move down

the options, your video le sizes will be

smaller.

Scene Mode

Set the video scene mode to one of the

following options Manual, Water, Riding,

Winter, Diving, Night.

Video Resolution

Resolution FPS Aspect Ratio

1080P

(1920x1080)

30 16:9

720P

(1280x720)

60/30 16:9

11 12

Capture Photos

Photo Mode

When you are in Video Mode, click Power/

Mode button twice to toggle to Photo

Mode.

Click the Record/Menu button to take

a photo.

Photo Settings

To enter the Photo Settings Menu, press

and hold the Record/Menu button for

2 seconds, and click the Power/Mode

button to scroll to the photo setting menu.

Mode

Change the capture mode: Manual,

Timelapse Photo, Burst & Self Timer.

Manual

This mode captures a photo every time

you click the Record button.

Timelapse Photo

Timelapse Photo mode allows you to

shoot a continuous sequence of photos.

This mode is activated by clicking the

Record/Menu button and will shoot

automatically until stopped by pressing

the Record/Menu button again.

Shoot in this mode with the following

intervals 5/10/15/30/60 seconds.

Burst

Burst mode allows you to shoot several

photos per second. Shoot in this mode

with the following intervals 3 photos/

5 photos.

Self Timer

When this mode is enabled, it lets you set

intervals for when a single photo is taken

after clicking the Record/Menu button.

2/5/10 second intervals are available.

Self Timer

Megapixels Resolution Aspect Ratio

52560x1920

(interpolated) 4:3

3 2048x1536 4:3

2 1600x1200 4:3

1 1280x960 4:3

Picture Quality

This setting lets you select the quality of

the images.

S.Fine is the highest quality and largest le

size. As you move down the options your

le sizes will become smaller.

Scene Mode

To set dierent scene mode: Manual,

Outdoor, Indoor, Portrait, Landscape,

Night.

13 14

To enter the Eect Settings Menu, press

and hold the Record button for 2 seconds,

and click the Power button to scroll to the

Eects setting menu

Zoom

Digital Zoom by the following options x1,

x2, x3, x4.

Filter

Add a color lter eect to your footage.

Filters include: Black & White, Sepia,

Vivid, Natural, Negative, Warm, Cool, Red,

Green, Blue are available for your options.

AE Meter

Manually control how the camera meters/

interprets light. Available options Center,

Average or Spot. The Default Mode is

Center.

Manually control the exposure/amount of

light the camera records. Intervals range:

-2.0/-1.0/+0.0/+1.0/+2.0

White Balance

Manually control the White Balance

setting.

Interval range: Auto, 3000K, 5500K,

6500K.

Effect Settings

ISO

Manually control the ISO level the

camera captures footage at. The

default option is Auto. Interval options:

Auto/100/200/400/800/1600.

Upside Down

When checked, this setting will allow you

to invert the footage captured - Useful

for when the camera is positioned

upside down.

Time Stamp

This setting will embed the Time on the

corner of your photos and videos. It is

OFF by default.

Note: That the higher the ISO

number the more noise/grain will

appear in your footage.

15 16

To enter the General Settings Menu, press

and hold the Record button for 2 seconds,

and click the Power button to scroll to the

General Settings menu.

Control

This allows you to change the volume of

MIC.

Beep

This allows you to turn on or o the beep

sound.

LED Indicator

Select if you would like to disable the LED

lights.

Auto LCD Off

This setting lets you conserve power

while shooting. It will switch o the LCD

screen after the set interval: O/1 min/3

min/5 min.

General Settings

Auto Power Off

This will power o the camera after a

period of inactivity.Intervals of o/5/10/30

Minutes.

TV Out

Setting the desired TV standard, PAL or

NTSC.

Time Setup

Set the Date and Time.

Language

Select your desired language.

Memory Format

This option will format the MicroSD

card. Recommended prior to using any

MicroSD that has been used in other

devices.

Default

Resets all settings to the factory default.

Software Info

Displays the current Firmware Version.

Note: Formatting the card will

permanently erase all data on

the card. Be sure to backup any

content prior to formatting.

17 18

Playback Battery Guide Maintenance

You can playback your footage on a PC

or computer/laptop.

Using the supplied USB cable, connect

the camera to your computer. Turn the

camera on, then the camera will now

appear as an external device.

You may also use a MicroSD Card reader

to view and playback les directly without

the camera.

HDTV Playback

To playback on HDTV you will need

a Micro HDMI – HDMI Cable.

When connected, the HDTV will switch

the Camera LCD screen OFF and mirror

the camera screen instead.

The camera will only output up to

1920x1080i via the Micro HDMI port.

Only use Kaiser Baas ocial batteries with

this product. Never use any third party

or unknown accessories or batteries.

To charge the camera:

1. Insert the battery into the camera.

2. Connect the USB Charging Cable to

the Micro USB port located on the

camera.

3. Connect the USB Charging Cable

to a computer or wall charger.

Adhere to these guidelines to ensure

maximum performance and longevity.

• Never use the camera in water without

the waterproof case. The camera is not

waterproof without the case.

• If camera has been used in salt water,

ALWAYS rinse the waterproof case in

fresh water to prevent corrosion.

• Regularly check the seals for debris or

dust on the door of the waterproof case

to prevent water, sand and dirt ingress.

• Never handle the camera, battery or

MicroSD Card with wet hands or in wet

conditions.

• Clean the camera lens and waterproof

case lens with a soft micro bre towel

to reduce any blurry footage due to

grease/ngerprints.

4. The camera status LED will be RED

whilst charging. Once charging is

complete the status LED light will

switch OFF.

5. A full charge cycle will take

approximately 3 hours by 0.5A/1A

charger.

WARNING!: If using a wall charger,

ensure that it is a certied product

for your region. AC Input: 100-240VAC

50/60Hz. DC Output: 5VDC 0.5A/1A.

Only use a USB charger with suitable

approval and certication. If you do not

know the output voltage/current of the

charger use a computer to charge the

battery. Do not charge in conditions

outside of the 10°C - 45°C range.

Inhaltsverzeichnis

Andere Kaiser Baas Action-Kamera Handbücher

Kaiser Baas

Kaiser Baas X2 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X400 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X100 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X100 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X450 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X1 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X150 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X250 Bedienungsanleitung

Kaiser Baas

Kaiser Baas KBA12009 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X100 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X350 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X650 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X600 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X250 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X500 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X150 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X200 Bedienungsanleitung

Kaiser Baas

Kaiser Baas KBA12022 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X220 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X90 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X400 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X2 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X300 Bedienungsanleitung

Kaiser Baas

Kaiser Baas X230 Bedienungsanleitung

Beliebte Action-Kamera Handbücher anderer Marken

Epic

Epic STC-EPC1T Bedienungsanleitung

Brinno

Brinno MAC200 DN Bedienungsanleitung

GoPro

GoPro HERO5 Bedienungsanleitung

ION

ION Air Pro 2 Bedienungsanleitung

Firefly

Firefly 6s Bedienungsanleitung

Omni

Omni HERO4 Bedienungsanleitung

nedis

nedis ACAM41BK Bedienungsanleitung

MOFILY

MOFILY YOCAM Bedienungsanleitung

ZERO-X

ZERO-X ZX-10 Bedienungsanleitung

Pyle

Pyle eXpo PSCHD90 Bedienungsanleitung

Midland

Midland XTC300 Bedienungsanleitung

Movii

Movii QC-8075 Bedienungsanleitung

Action Camera

Action Camera AC32 Bedienungsanleitung

Coleman

Coleman C5WP Xtreme Bedienungsanleitung

MCM Electronics

MCM Electronics 82-19749 Bedienungsanleitung

Aim

Aim SmartyCam 3 Sport Bedienungsanleitung

Naxa

Naxa NDC-409 Bedienungsanleitung

Panasonic

Panasonic HX-A1M Bedienungsanleitung