Kalika Ulydoor Bedienungsanleitung

Fax No: 01264 723 576

Email: [email protected]

Web: www.kalika.co.uk

ULYDOR BY KALIKA

(PBX Door Entry Systems)

Operating Instructions

2 Ulydor Door Entry Systems – Operating Instructions

Thank you for purchasing our Ulydor PBX Modular Door Entry System.

Ulydor is a highly versatile door entry system, allowing units from 0-64

buttons to be built.

When a visitor arrives at the building it allows them to select from the

name panel the company/person they wish to visit. The visitor presses the

button for that company/person and the appropriate telephone then rings

and allows a conversation to take place. To allow the visitor access the

company/person presses a two digit code on the handset, activating the

door lock and enabling entry to the building.

Ulydor works with most telephone systems able to provide a two wire

analogue extension. With every installation a Ulydor Control Unit will be

required of which there are three options: a UC0 (No Buttons), UC1 (One

Button) and a UC2 (Two Buttons). By adding C4 (4 button extension

control module) and M4 (4 button slave module) units, a system of 0-64

buttons can be built. Each button can be programmed with up to a 16 digit

number, including *, #, pause and hook flash.

Examples of Ulydor Entry Systems

Buttons Modules No. of Modules MK-x

0 UC0 1 1

1 UC1 1 1

2 UC2 1 1

4 UC0 - C4 2 2

5 UC1 - C4 2 2

6 UC2 - C4 2 2

8 UC0 - C4 - M4 3 3

9 UC1 - C4 - M4 3 3

10 UC2 - C4 - M4 3 3

12 UC0 - 2 x C4 - M4 4 4

13 UC1 - 2 x C4 - M4 4 4

14 UC2 - 2 x C4 - M4 4 4

16 UC0 - 2 x (C4+M4) 5 3 + 2

17 UC1 - 2 x (C4+M4) 5 3 + 2

18 UC2 - 2 x (C4+M4) 5 3 + 2

20 UC0 – 3 x C4 – 2 x M4 6 3 + 3

21 UC1 – 3 x C4 – 2 x M4 6 3 + 3

22 UC2 – 3 x C4 – 2 x M4 6 3 + 3

24 UC0 – 3 x C4 – 3 x M4 7 4 + 3

25 UC1 – 3 x C4 – 3 x M4 7 4 + 3

26 UC2 – 3 x C4 – 3 x M4 7 4 + 3

28 UC0 – 4 x C4 – 3 x M4 8 4 + 4

29 UC1 – 4 x C4 – 3 x M4 8 4 + 4

30 UC2 – 4 x C4 – 3 x M4 8 4 + 4

64 UC0 – 8 x C4 – 8 x M4 17 4 + 4 + 4 + 4 +1

Keypad can only be added on systems between 0 – 18 buttons.

Camera module can be added on any combination of buttons.

3 Ulydor Door Entry Systems – Operating Instructions

The Ulydor Control Modules can also be used in conjunction with a UCK

(12 Button Keypad Module) – particularly useful for staff entry.

Ulydor is supplied with 2 relays allowing the control of two doors for

opening and closing as well as lighting, cameras, etc.

The programming of a Ulydor Door Entry System is carried out by the use

of Windows based software supplied with all UC modules, or by the use of

the telephone keypad. It can also be carried out remotely and those with

the system code can program or re-program remotely by use of a GSM

mobile telephone or by connecting a jumper on the PCB. If a password is

forgotten, then re-programming would be carried out by use of the jumper.

4 Ulydor Door Entry Systems – Operating Instructions

TABLE OF CONTENTS

1 BASIC DESCRIPTION ………………………………………………. 6

1.1 Features ……………………………………………………... 6

1.2 Module Assembly ………………………………………….. 7

INSTALLATION OF ULYDOR ASSEMBLY ………………………

2.1 Installation of Surface Mount Module …………………. 9

2.2 Flush-Mounted Installation ………………………………. 9

2.3 Change of Nameplates ……………………………………. 10

2.4 Installing the Modules …………………………………….. 11

2.4.1 UCx Basic Module ……………………………... 11

2.4.2 Extending Modules - C4 & M4 ….................. 13

2.4.3 UCK – 12 Button Keypad Module …………… 14

2.4.4 Signalling Overview …………………………… 15

USING ULYDOR ……………………………………………………...

3.1 Ulydor System Without & With Keypad ……………….. 16

3.1.1 Without Keypad ………………………………... 16

3.1.2 With Keypad ……………………………………. 17

3.2 Using the System ………………………………………….. 18

3.2.1 Outgoing Call …………………………………… 18

3.2.2 Incoming Call …………………………………… 18

PROGRAMMING OF PARAMETERS ……………………………..

4.1 Programming through Phone …………………………… 19

4.1.1 Entry to Programming ………………………… 19

4.1.2 Programming of Parameters ………………… 19

4.2 Programming from PC – Program Nset ……………….. 20

4.3 Overview of Parameters ………………………………….. 21

4.4 Description of Parameters ……………………………….. 22

4.4.1 Direct Dialling – Memories …………………… 22

4.4.2 Relays ……………………………………………. 23

4.4.3 Basic Parameters ……………………………… 25

4.4.4 Time Parameters ………………………………. 27

4.4.5 Presetting and Deleting ………………………. 29

4.4.6 Programming Termination …………………… 29

4.5 System Setting ……………………………………………... 29

4.6 List of Presetting Parameters …………………………… 30

TECHNICAL PARAMETERS ……………………………………….

5.1 Electrical Parameters ……………………………………... 31

5.2 Mechanical Dimensions ………………………………….. 31

TABLE OF EASY PROGRAMMING ……………………………….

5 Ulydor Door Entry Systems – Operating Instructions

TABLE OF CONTENTS (Contd)

DISTY 300 ……………………………………………………………..

7.1 Description ………………………………………………….. 34

7.2 Signalling ……………………………………………………. 34

7.2.1 LED Indication ………………………………….. 34

7.2.2 Tones …………………………………………….. 35

IP CAMERA …………………………………………………………...

6 Ulydor Door Entry Systems – Operating Instructions

1 BASIC DESCRIPTION

1.1 Features

•Modular system allows connection of 0 - 64 buttons.

•Voice link is supplied from telephone extension.

•Pulse and Tone dialling (DTMF).

•Two 16 digit numbers with each button (including ρ, #, Hook Flash /

Recall and Pause).

•Day / Night switching.

•Extend call time by ρ or #

•Connection of two independent locks or activate other devices.

•5 switching modes (e.g. camera, lighting, gradual opening, etc).

•Two codes for hanging up the Ulydor from the telephone.

•Two codes for door opening from the telephone.

•Six code locks (password from buttons at the door).

•Optional keypad, on systems with between 0-18 standard buttons.

•Keypad modes can be for direct dialling or memory dialing.

•Optional maximum number of rings to answer an incoming call.

•Optional time interval between button pressing for code entry.

•Optional time for hanging up before redial.

•Optional time before alternative number call.

•Optional parameters for tone choice, length of Recall and Pause.

•Default setting of some parameters.

•Besides the Preset Basic setting it is possible to preset two

alternative default settings.

•Remote telephone programming using DTMF tones or direct from a

PC.

•Integrated heating of printed circuit

•Permanent lighting buttons and name cards.

•Earth connection for better protection against static electricity.

7 Ulydor Door Entry Systems – Operating Instructions

1.2 Module Assembly

The structural elements of Ulydor are the basic modules: UC0, UC1,

UC2 and extending button modules C4 and M4 with four buttons.

UC0 Module UC1 Module UC2 Module C4/M4 Module

It is possible to provide the assembly with numerical keypad and camera

module (IP, WI-FI, Coax).

UCK Module

IP Camera Analogue Camera DECT Disty Box

The complete assembly consists of a system of maximum 4 modules in

column and maximum 3 columns side by side. Examples of frame

configuration are:

8 Ulydor Door Entry Systems – Operating Instructions

SMB1

Protected Cabinet &

Cosmetic Surround

SMB2

Protected Cabinet &

Cosmetic Surround

SMB4

Proected Cabinet &

Cosmetic Surround

FMBB2

Flush Mount Back Box

Cosmetic Surround

UC2 + C4 + FMBB2 (Horiz)

9 Ulydor Door Entry Systems – Operating Instructions

2 INSTALLATION OF ULYDOR ASSEMBLY

2.1 Installation of Surface Mount Module

The installation of a SMBx Surface Mount Box is

made by screwing the assembly to the wall.

2.2

Flush-Mounted Installation

The FMBBx box is mounted into the wall and secured by the fixing

screws provided. Lugs are provided for joining FMBBx boxes together if

larger installations are required.

The cosmetic protecting frame provides an

overlap to aid any unevenness when mounting

the box into the space created in the wall. The

canopy (EWHx) is necessary for installations in

external areas and is an accessory for the

FMBBx box and replaces the need for the

FMBBx cosmetic surround. When installed in exposed areas that are

subject to condensation, temperature changes, waterspray, or rain it is

recommended that the EWHx box is used and that the heater connector

is jumpered onto the UCx module and set to the "ON" position.

The BOARD HEATING has two positive functions.

Firstly, it heats up the electronics in winter at

temperatures -20

C (temperature range has

guaranteed parameters from -20

C), and secondly

with external installations experiencing rapid

temperature changes in humid areas the heater

prevents condensation on the Ulydor UCx PCB.

10 Ulydor Door Entry Systems – Operating Instructions

2.3

Change of Nameplates

The first step is to dismantle the fixing frame (See Diagram 1) by

removing the two hidden screws top and bottom. Remove the modules

requiring information change by inserting a screw driver into the side of

the module (See Diagrams 2 and 3). Each module is in two parts, the

front facia plate being metal and the back plate being plastic. Separate

the two parts and note that each button has its own nameplate located

under a clear plastic flag (See Diagram 4). New information can be

printed from the Nset program on the supplied CD or downloaded from

www.kalika.co.uk

Diagram 1 Diagram 2

Diagram 3 Diagram 4

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kalika Gegensprechanlage Handbücher

Kalika

Kalika Ulydor Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung