KAPUCI BGX-D1-25MAZ Bedienungsanleitung

Product Manual

Applicable Model:BGX-D1-25MAZ

Packing Accessories

After open the package, please first check whether the accessories

are consistent with the following table.If you have any questions,

please contact:support@le-safe.com

Safe Box 1

Emergency Keys 2

Key Box 1

Expension Screw 2

Product Manual 1

External Batter y Pack 1

Tips

1.Please keep the emergency key in a safe place.Don‘t put the emergency key or

external battery pack in the safe box.

2.Please follow the instructions in the product manual strictly

Product Parameters

Product

Size

G.W/N.T

250mm x 350mm x 250mm(HxWxD)

KAPUCI SAFE BOX

11/10KG Model BGX-D1-25MAZ

Display LCD

Material thickness Door:5mm

Open Method Password+Keys

Internal Internal Light+Shelf

CONTENTS

Product Description

Panel Introduction

First Way to Open-External Battery Pack

Add Password

Second Way to Open-Emerency Keys

Normally Open

Close The Door

Undervolta

Hidden Code Setting

Three Times Wrong Code Lock

System Initialization

Remove The Alarm

Delect Function 6

Installation Notes 7

Product Description

Box

Control Panel

Feet

Door

Panel Introduction

Fingerprint Collection Area

Password Keypad

Emergency Keyhole Cover

Emergency Keyhole

External Battery Pack Hole

Tips:

In order to prevent the emergency Keyhole Cover from being lost during transportion

we put the cover in the key box.

【First Way to Open-External Battery Pack】

In the factory state,you can use factory password “168” .After enter the correct

password,you must end with “#”to let the System know that your password has

been entered. The management password is “88888888”

Step 1:

Insert 4-AA batteries into the external battery

pack in the correct direction(Because of

transportation,the battery is not included

in the accessorise)

Step 2:

Press the left or right end of the emergency keyhole

cover to expose the emergency keyhold.

(If the emergency keyhold cover is in the key box,this

step can be omitted )

Step 3:

Plug the battery plug into the external battery

pack hole.And press the“#”to wake up screen,

when the display shows the cursor states,enter

168 and press the “#”key to confirm.The display

shows “OPEN” and the door can be opend

automatically.

Step 3: Step 4:

Unplug the battery pack,replace the battery into the

battery compartment above the back cover of the

box door.

When the battery is dead,or external battery pack cannot be found,or the password is forgotten,or

the fingerprint is not recognized,etc.You can use the emergency key to open the safe.

Once again,the emergency key and the external battery pack are very important,do not put them

int the safe box .

Add Password

Modify users password(168):

Modify management password(88888888)

We provide two sets of initial factory password,one is user password(168) and

one is management password(88888888).Since the password Set button is inside

you must do it with the door open.

【Set button i s un der the black protective co ver,remove the protecti ve

cover,you can see the set button in side,when you finish the setting,restore

the protective cover to its original position,which can protect the set

button from being operated by mistake】

1.When the door is open and the display light is

off(Standby State),short press(About1 Second)

the set button on the inside of the back of the door.

2.The cursor is flashing.Enter3-8 digits new passwords.End with “#”key after entering the password.

(Pressing the # key means to tell the system that your password has been entered)

3.If the input is successful,the dispaly shows”IN” and a beep sounds.

eg:If you set the new password is “123456”,it means that you replaced the user password with 123456,

you can use 123456 to open the door,168 can not open the door.

1.When the door is open and the display light is off(Standby State).First press the “#”key to wake up

the display,then enter”00”,and press the set button on the inside of the back of the door.

2.The cursor is flashing.Enter3-8 digits new passwords.End with “#”key after entering the password.

(Pressing the # key means to tell the system that your password has been entered)

3.If the input is successful,the dispaly shows”IN” and a beep sounds.

Second Way to Open-Emerency Keys Open

When the electronic system is abnormal or the password is forgotten or the battery is dead.

You can use the emergency to open the safe, ensure that belongs can be taken out

Setp 1:

Press the left or right end of the emergency

keyhold cover and expose the emergency

keyhold.(If the emergency keyhold cover is

in the key box,this stepcan be omitted )

Step 2:

Insert the emergency key in the correct direction

(The key’s notch direction is to the left or right

but not up and down),then turn it clockwise to

the limit to open the safes.

Step 3: Step 4:

After the emergency is restored to its original

position,pull it out,and put 4-AAbattery into the

battery box above the back cover of the door.

When installing the battery,pay attention to the

positive and negative sides.

At this point,you can notice that the door bolt

is in an extended state.When the door bolt is

extended,you cannot close the door,which will

damage the paint.

After installing the battery,restore the emergency

lock cover,the emergency lock cover may be in the

key box.

Next,you can refer to:

Normal Open

Add Password

Close The Door

Prompt

If the emergency key is not pulled out ,the door of the box can not be locked,

otherwise it will cause the code lock failure.

This emergency lock can only be used when the electronic system is abnormal

when it is opened for the first time

Long-term use of the emergency key will affect the service life of the electronic system

Please do not put emergency keys in the safe box

【Normally Open】

【Close The Door】

Just close the box door ,while pressing the door with one hand,press the “#”key with the other hand.

The door can be automatically locked.

【Hidden Code Setting】

After waking up the system,press the”*”button again when no password is entered,the hidden code

setting is released,the display interface returns to the normal state,and the entered number is display

when the password is entered.

Enter the set password(Factory Password:168)in the keypad area,press”#” to confirm,the password is

correct,the screen display”OPEN”,and the buzzer”Di-Di”sounds,and the door automatically pops open.

At this time,if an incorrect password is entered,the unlocking fails,and the buzzer sounds three times

“Di-DI-Di”, and the dispaly shows”Error”

【Undervolta】

When the battery is running low,each time the system wakes up,the display will show “LOW-BAR”,

reminding you to replace the battery as soon as possible

1.If you want to restore,press the “*”button again when no password is entered,the hidden code

setting is released;The display interface returns to the normal state,and the entered number is

displayed when the password is entered.

2.The hidden code setting automatically released after each password is entered.

【Three Times Wrong Code Lock】

1.When the wrong password is entered ,the buzzer continuously alarms and the screen display “Error”

【System Initialization(Restore Factory Settings)】

Make sure the door is open ,then press the set button(about 10 seconds) until the screen light up

and the display shows”DEL ALL”,system initialization is successful.

【Remove The Alarm】

The three wrong password alarm can only be released after removing the battery.The alarm can

be cleared by entering the correct password in the alarm state,or the alarm will be automatically

released after 20 seconds.

Before the password is entered incorrectly and is not confirmed,press the “*”button to delete

the entered incorrect password one by one.

2.If you enter the wrong password 3 times in succession the system will automatically lock for 3 minutes,

and the alarm will start to count down 180 seconds after 20 seconds .During this process ,pressing any

key will have no effect.

【Delect Function】

Inhaltsverzeichnis

Andere KAPUCI Sicher Handbücher

KAPUCI

KAPUCI BGX-X1-45PMAZ Bedienungsanleitung

Beliebte Sicher Handbücher anderer Marken

Squire

Squire Stronghold Keysafe Bedienungsanleitung

Phoenix

Phoenix FS0352C Produktinformationsblatt

Phoenix

Phoenix KS0030E Series Bedienungsanleitung

Vaultek

Vaultek 10 Series Technisches Datenblatt

Arregui

Arregui CLASS Bedienungsanleitung

Beaumont

Beaumont SMART KEYBOX Bedienungsanleitung

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Bedienungsanleitung

Hornady

Hornady SnapSafe Trunk Safe II Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Bedienungsanleitung

Honeywell

Honeywell 5912 Bedienungsanleitung

Phoenix

Phoenix FS1280F Bedienungsanleitung

Phoenix

Phoenix SS0992K Produktinformationsblatt

Technomax

Technomax Trony Series Handbuch

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Bedienungsanleitung

RICHTER CZECH

RICHTER CZECH LA Bedienungsanleitung

Olymp

Olymp GOsafe 110 Bedienungsanleitung

Phoenix

Phoenix SS0100E Produktinformationsblatt

Clarke

Clarke Strong-Arm CS1000K Bedienungsanleitung