■Memory
Windows Vista: 1GB or more is recommended (512MB or more is required)
Windows 7: 1GB or more is recommended (32-bit) 2GB or more is required (64-bit)
Windows 8/8.1: 2GB or more is required
Mac OS X: 512MB or more is recommended (256MB or more is required)
■Hard Disk
100MB or more is recommended (50MB or more free space is required)
Windows 8/8.1: 2GB or more free space is required
■Screen resolution
1024 x 768 or more is recommended
■USB port
USB 2.0 or USB 3.0 (except USB ports by PC manufacturer's specification)
■Compatible browser (for Speed USB STICK setting tool)
Microsoft Internet Explorer 8.0-11.0
Safari 6.0-8.0
Firefox 24.0-33
Google Chrome 10-39
Opera 11-25
Use outside these environments may affect performance. Operating environment (hardware,
connected peripherals, installed applications, etc.) may also affect performance. Operation
may not be performed properly depending on browser settings such as proxy or security in
Internet options.
* For PC support, OS version upgrade information, etc., see corresponding manufacturer’s
product support documentation and follow the instructions.
Names and functions of parts
■Front ■Back ■Back
(Under the Back cover)
①USB connector
Rotate the USB connector to pull out, then
connect to a USB port of PC.
②Status LED
Indicates status of the product.
③Back cover
④au Micro IC Card slot
Attach au Micro IC Card (LTE).
■Attaching to a PC
Unfold the USB connector. The USB connector can be unfolded up to 180 degree and the top
part can be rotated up to 180 degree.
・
Stow the USB connector back after removing the product from a PC.
* Do not unfold the USB connector more than 180 degree.
* Do not rotate the top of the USB connector more than 180 degree.
■Status LED indications
The product status is indicated by LED lightings.
LED color and lighting
pattern Status
Blinks in light blue WiMAX 2+/UMTS
connected (Signal: Weak)
Lights in green LTE connected (Signal:
Strong)
Blinks in green LTE connected (Signal:
Weak)
Flashes in green Updating software
LED color and lighting
pattern Status
Flashes in red Activating
Blinks in red
Out of service area
au Micro IC Card (LTE) not
inserted, PIN/PUK request
Lights in red Stand-by
Lights in light blue WiMAX 2+/UMTS
connected (Signal: Strong)
Attaching au Micro IC Card (LTE)
Your phone number etc. are stored on the au Micro IC Card
(LTE).
The product is compliant with au Micro IC Card (LTE) only.
IC cards other than au Micro IC Card (LTE) is not available.
* Do not insert an IC card with a conversion adapter.
* Although the phone number is stored as customer information, voice calls are not available
with the product.
* Note the following points, otherwise handling the au Micro IC Card (LTE) may cause
malfunction or damage.
・
Do not touch the IC (metal) part of the au Micro IC Card (LTE) or the IC card terminal inside
the product.
・Insert in the correct direction.
・Do not force to attach or remove.
* Enable PIN Code Operation to prevent au Micro IC Card (LTE) from unauthorized use by
others or to protect personal information (see next page).
1Slide the back cover in the
direction of arrow to remove
2
Face IC part of au Micro IC Card
(LTE) down and insert it in the
direction of arrow
•Check the notch orientation.
Notch
3Make sure that au Micro IC Card
(LTE) is fully set in, then attach
the back cover sliding in the
direction of arrow
Read Before Using
Quick Start Guide
Preface
Thank you for buying the Speed USB STICK U01 (simply called the “product” or “Speed USB STICK” from here on).
Before using the product, be sure to read the “Quick Start Guide” (this manual) and “Notes on usage” to
ensure correct use. After reading, store the manuals in a safe place for future reference.
“Quick Start Guide” (this manual) describes basic operations and settings of major functions.
As an instruction manual of the product, refer to the supplied “Quick Start Guide” (this manual), “Notes on
usage”, or “取扱説明書 詳細版 (Full Instruction Manual)” (Japanese) available on the au homepage. In this
manual, “Instruction Manual” includes “Quick Start Guide” (this manual), “Notes on usage”, and “取扱説明書 詳
細版 (Full Instruction Manual)” (Japanese).
・“Instruction Manual” is available on the au homepage.
http://www.au.kddi.com/support/mobile/guide/manual/
・Illustrations and screens shown in this manual may look different from the actual ones. In some cases,
minor details or a part of a screen may be omitted.
Exemptions and Safety Precautions
Before using the product, be sure to read the “Exemptions” and “Safety Precautions (Observe Strictly)” of “Notes
on usage” to ensure correct use.
When using the product
・During communication, please keep the device farther than 1.5 cm away from your body without including
any metals.
・Communication is not possible even inside the service area in places where the signal does not reach (e.g.
tunnels and basements). Also, communication is sometimes not possible in poor reception areas.
Communication is sometimes interrupted if you move into a poor reception areas during communications.
・Since this product uses radio waves, the possibility of communication intercepts by third parties cannot be
eliminated. (Though WiMAX 2+, LTE and UMTS systems have highly secure confidential communication
features.)
・This product is compatible with the international roaming service. Each network service described in this
manual varies depending on the area and service content.
・Since this product is a radio station under the Radio Law, you may be asked to temporarily submit the
product for inspection in accordance with the Radio Law.
・The product number of data communication terminals is automatically sent to KDDI CORPORATION for
maintenance and monitoring operational status of your data communication terminals.
・Take care not to inconvenience people around you when you use the product in a public place.
・When the product is used by a child, parents or guardians should thoroughly read the “Instruction Manual”
and teach the child how to use it.
・Before you start using the product overseas, check the relevant laws and regulations of the country/region
you visit.
Cell Phone Etiquette
■Use of the product is not allowed in the following places!
・Do not use the product while driving a car or riding a motorbike or bicycle. It may cause a traffic accident.
Use of the product while driving a car or motorbike is prohibited by law. Use of the product while riding a
bicycle may be punishable by some regulations.
・Use of electric devices on board is restricted. Follow the instructions of each airline company.
■Make sure where you are when using!
・Use the product in a place where it cannot block foot or traffic in a street.
■Pay careful attention to the people around!
・In a crowd such as crowded train, there may be people with a cardiac pacemaker nearby. Turn off the
power of the product in advance.
・When a medical institution such as a hospital has laid down designated areas where use of the product is
prohibited or is not allowed to be brought in, turn off the power of the product in advance.
List of packaged items
Speed USB STICK U01
main unit
(Notes on usage)
(Japanese)
●Warranty card (Japanese)
●USB extension cable (Sample)
(Quick Start Guide)
(Japanese)
* Keep the included accessories including warranty at hand.
What you can do with Speed USB STICK
Use this product on Windows/Mac PCs equipped with USB ports to perform data
communication by Internet connection using WiMAX 2+ or LTE system. When using abroad,
LTE system is available in addition to UMTS.
* The product automatically determines most suitable network at that time to connect.
* Communication by the product is a best effort only. Communication speed changes according to
congestion status of lines.
Operation environment (Compatible OS)
■Compatible OS
Windows Vista (32-bit/64-bit)
Windows 7 (32-bit/64-bit)
Windows 8 (32-bit/64-bit)
Windows 8.1 (32-bit/64-bit)
Mac OS X 10.5
Mac OS X 10.6 (32-bit/64-bit)
Mac OS X 10.7 (32-bit/64-bit)
Mac OS X 10.8 (64-bit)
Mac OS X 10.9 (64-bit)
Mac OS X 10.10 (64-bit)
For each OS, Japanese version/English version is supported.
However, Windows RT is not supported.
IC (metal)
