Kedacom PTZ Bedienungsanleitung
i
KEDACOM
User Manual for HD PTZ Camera
V1R1 (March, 2019)
ii
Trademark
Kedacom™ and are trademarks of Suzhou Keda Technology Co., Ltd. in China and
various other countries. All other trademarks mentioned in this document are the property of their
respective holders.
Suzhou Keda Technology Co., Ltd.
131 Jinshan Road
New District, Suzhou, 215011
People's Republic of China
http://www.kedacom.com/en
Tel: +86-512-68418188
Fax: +86-512-68412699
© 2019 Suzhou Keda Technology Co., Ltd. All rights reserved.
Without the prior written permission of Suzhou Keda Technology Co., Ltd., any reproduction, translation
or retransmission of all or any part of this document for any purpose in either electronic or mechanical
form is not allowed.
Notice
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied. Suzhou
Keda Technology Co., Ltd. is not responsible for printing or clerical errors.
Target Audience
Administrators and Operators of Video Surveillance Products
Document Version
V1R1
Applicable Models
IPC523 series
Related Document
Quick Start Guide
iii
Convention
Icon
Convention
Notes and warning: necessary
supplement of operations
Sign
Convention
BOLD
Menu, e.g. Drag to Zoom
>
Connector between menus of
different level, e.g. Settings >
Camera
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to avoid danger or
property loss. Please read this Guide carefully before using the product, and keep it properly for future
reference. If the product cannot work normally or is damaged because the user does not follow the
safety instructions, we shall not assume any responsibility.
Before installation, please follow the instructions below:
Instructions
1. Please adopt power supply in the safety voltage range.
2. If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble or repair the product yourself in any way.
3. Do not drop the camera or subject it to physical shock.
4. When cleaning the lens, please use a rubber dust blower to remove dust on the lens or filter, and
use dry soft cleaning cloth to remove the dirt on camera surface. For some hard dirt, user can apply
some detergent to the cleaning cloth and wipe gently. Never apply any volatile solvent, such as
ethanol, benzene and diluents, to avoid damage to surface coating.
5. Do not focus the camera lens on strong light such as the sun or incandescent lamp. The strong light
can cause overexposure or light leak (not camera malfunction), which may shorten camera lifetime.
6. Do not expose the camera in the environment not defined in the Manual. Maintenance and fee due
to exposure of product in the wrong conditions will be user’s responsibility.
7. Indoor Dome Camera cannot be installed at rainy or wet places. If the Indoor Dome Camera has a
connecting rod on the bracket, make sure there is no hole on the rod to avoid water.
8. Outdoor Dome Camera must be completely sealed to avoid dampness. Make sure there is no hole
on the connecting rod of bracket to avoid water.
9. While shipping the camera, pack it in the factory packing or use materials with equivalent quality.
10. When it is necessary to replace a part, please contact your dealer in advance and replace the part
with specified model or part of the same features. We shall not assume any responsibility for
problems caused by unauthorized replacement.
iv
11. Do not shield the sensor at front of the lens housing.
12. When power off the camera, reboot it after 30 seconds.
Anti-thunder and Anti-surge
The camera adopts built-in anti-thunder technology and can withstand instant 4KV thunder when it is
well grounded. To prevent damage caused by thunders exceeding the built-in anti-thunder level, an
independent anti-thunder engineering must be carried out. When installing it outdoor, please note the
following tips to reduce damage efficiently such as thunder.
1. The distance between the signal wire and the high-tension apparatus or high voltage cable should
be at least 50m.
2. Try to route cables along the eave when installing outdoor.
3. When installing camera in an open field, route cables inside sealed steel pipes under the earth and
ground the pipes with one point. Never route cables in aerial way.
4. In heavy thunderstorm area or high-tension zone (such as high voltage transformer substation), an
extra superpower anti-thunder apparatus and lightning rod must be installed.
5. The anti-thunder and grounding design of outdoor apparatus and wires must consider the
anti-thunder requirements of the building and conform to the requests of national and industrial
standards.
6. The system must be grounded with equipotential. The grounding apparatus must be
anti-interference and electrically safe. It cannot be short-circuited or hybrid connected to the null line
of high-voltage power grid. When it is grounded independently, the ground impedance is ≤4Ω and
the earth lead section surface must be ≥25mm2.
7. The anti-thunder grounding wire of the dome camera uses multi-strand copper cable with section
surface ≥4mm2(strand diameter about ≥2.3mm).
5
Contents
1. Product Appearance.......................................................................................................................1
2. Start Up............................................................................................................................................2
2.1 Network Connection.............................................................................................................2
2.2 Activate Camera...................................................................................................................2
2.3 Login and Log Out................................................................................................................5
2.4 Main Interface ......................................................................................................................7
3. Basic Functions..............................................................................................................................8
3.1 Live View..............................................................................................................................8
3.1.1 PTZ Control................................................................................................................8
3.1.2 Preset.........................................................................................................................8
3.1.3 Image Adjustment ......................................................................................................9
3.1.4 Live View Window....................................................................................................10
3.2 Playback ............................................................................................................................11
3.3 Snapshot............................................................................................................................13
3.4 Local Setting ......................................................................................................................14
4. Network .........................................................................................................................................17
4.1 IP and Port.........................................................................................................................17
4.1.1 LAN ..........................................................................................................................17
4.1.2 Port...........................................................................................................................18
4.2 Access Protocol .................................................................................................................18
4.2.1 VSIP.........................................................................................................................18
4.2.2 ONVIF ......................................................................................................................19
4.2.3 GB28181..................................................................................................................19
4.3 Other Protocol....................................................................................................................21
4.3.1 DDNS.......................................................................................................................21
4.3.2 FTP...........................................................................................................................21
4.3.3 PPPoE......................................................................................................................22
4.3.4 K-SNMP ...................................................................................................................22
4.3.5 802.1X......................................................................................................................23
4.3.6 QoS..........................................................................................................................23
4.3.7 UPnP........................................................................................................................24
4.3.8 SMTP .......................................................................................................................25
5. Camera ..........................................................................................................................................26
5.1 Image.................................................................................................................................26
5.1.1 Image Adjustment ....................................................................................................26
5.1.2 Exposure..................................................................................................................26
5.1.3 Focus........................................................................................................................27
5.1.4 White Balance..........................................................................................................27
5.1.5 Night Cut ..................................................................................................................28
5.1.6 Laser ........................................................................................................................28
5.1.7 Image Enhancement ................................................................................................29
5.1.8 EIS ...........................................................................................................................30
6
5.1.9 Rotate and BNC.......................................................................................................30
5.1.10 Effect Parameters ................................................................................................31
5.2 OSD...................................................................................................................................31
5.3 Video..................................................................................................................................32
5.3.1 Encoding Format......................................................................................................32
5.3.2 ROI...........................................................................................................................34
5.3.3 Privacy Mask............................................................................................................34
5.3.4 Video Info Overlay....................................................................................................35
5.4 Audio..................................................................................................................................36
5.4.1 Audio Encoding........................................................................................................36
5.4.2 Audio Decoding........................................................................................................36
5.5 PTZ....................................................................................................................................36
5.5.1 Basic Configuration ..................................................................................................37
5.5.2 Preset Position.........................................................................................................38
5.5.3 Guard Tour...............................................................................................................39
5.5.4 Path Mode................................................................................................................40
5.5.5 Scheduled Task........................................................................................................41
5.5.6 Positioning................................................................................................................42
6. Event..............................................................................................................................................44
6.1 Intelligent Function.............................................................................................................44
6.1.1 Motion Detection ......................................................................................................44
6.1.2 Video Blocked ..........................................................................................................46
6.1.3 Guard Line................................................................................................................47
6.1.4 Entry Guard Area .....................................................................................................49
6.1.5 Exit Guard Area........................................................................................................51
6.1.6 Enter Guard Area.....................................................................................................53
6.1.7 Object Left................................................................................................................55
6.1.8 Object Removal........................................................................................................57
6.1.9 Gathering..................................................................................................................60
6.1.10 Audio Surge.........................................................................................................61
6.2 Alarm Input.........................................................................................................................63
6.3 Alarm Output......................................................................................................................65
6.4 Abnormality Linkage...........................................................................................................65
7. Storage..........................................................................................................................................67
7.1 Storage Management.........................................................................................................67
7.2 Recording...........................................................................................................................67
7.3 Snapshot............................................................................................................................69
8. System...........................................................................................................................................71
8.1 Device Info.........................................................................................................................71
8.2 User Security......................................................................................................................71
8.2.1 User..........................................................................................................................71
8.2.2 RTSP Authorization..................................................................................................72
8.2.3 IP Filter.....................................................................................................................72
7
8.2.4 Security Service .......................................................................................................73
8.3 Time...................................................................................................................................73
8.4 Serial Port ..........................................................................................................................75
8.5 Log.....................................................................................................................................75
8.6 System Maintenance..........................................................................................................76
9. Appendix: Glossary of Terms......................................................................................................78
HD PTZ Camera User Manual
1
1. Product Appearance
Picture 1-1 Product appearance
HD PTZ Camera User Manual
2
2. Start Up
2.1 Network Connection
Note: You are responsible for risks of accessing cameras to the Internet, including but not limited to
possible cyber-attack, hacking attack, virus infection and etc. This company is not responsible for the
product failures and information disclosure caused thereby, but will provide timely technical support for the
cameras.
After the camera is installed, configure parameters and functions through the web client. Please ensure
the mutual network communication between the camera and the PC before configuring.
Requirements of PC for installing the client:
Processor: Intel CORE®i5 series and later version or other equivalent processors
RAM Memory: 8GB DDR4 or above
Hard Disk: SATA SSD or High Speed M.2
Operating System: Windows 7 or higher versions
Browser: IE8.0 and newer version, Firefox (49 and lower), Google Chrome (41 and lower)
DirectX：11.0
2.2 Activate Camera
When the camera is first used, user should activate it and set the login password for normal use.
There are 2 methods to activate the camera: though IPCSearch or through browser.
Activate through IPCSearch
1) Get IPCSearch from the attached CD and install it according to the prompts.
2) After finishing installation, open IPCsearch and the system will search the cameras in LAN and
display the list as shown below.
Picture 2-1 IPCSearch
Note: Device type and alias is subject to the search result.
HD PTZ Camera User Manual
3
3) Select the camera to be activated, right click and select “Activate”. On the popup interface,
configure admin user password and email for claiming password. Click “Activate”.
4) When there are more than one non-activated devices, select the devices and click “Batch
processing”. On the popup interface, set admin user’s password and the email address to
claiming password. Click “Activate” and wait for rebooting.
Picture 2-2 Activate through IPCSearch
5) Select a camera to be configured, click “Modify Params”or right click the mouse. Modify
parameters and fill admin user name (admin) and the password set when activating the device.
Inhaltsverzeichnis
Andere Kedacom Digitalkamera Handbücher
