Keeler K-LED II Bedienungsanleitung

Keeler K-LED II

Headlamp

Instructions for use

Back

Contents

Page

1. Copyright and trademarks ................................................... 3

2. Introduction ........................................................................... 4

• Product description

3. Symbols .................................................................................. 5

4. Safety ..................................................................................... 6

• Device classification

• Warnings

• Cautions ........................................................................... 7

5. K-LED II Headlamp and charging units ................................ 8

• Product description

6. Fitting K-LED II headlamp to your loupe frame .................. 9

7. K-LED II charging and storage units .................................. 11

• Power supply assembly

• Charging battery packs ................................................ 12

8. Cleaning instructions .......................................................... 14

9. Specifications and electrical ratings .................................. 15

• Electrical specifications

• Transport, storage and operation

10. Annex I – EMC statement and guidelines ......................... 16

11. Spare parts and accessories ................................................ 21

12. Warranty .............................................................................. 22

13. Contact and disposal information ..................................... 23

Click on the headings above to go directly to that section. Use the buttons on the right to navigate the document.

Clicking ‘Home’ from any page brings you back to this contents page.

Home

Back

1. Copyright and trademarks

The information contained within this manual must not be reproduced in

whole or in part without the manufacturer’s prior written approval.

As part of our policy for continued product development we reserve the

right to make changes to specifications and other information contained

in this document without prior notice.

K-LED II is a registered trademark of Keeler Ltd 2012.

Published in the UK 2012.

Home

Back

2. Introduction

Thank you for purchasing the Keeler K-LED II Headlamp

We have taken the greatest care in the design, development and

manufacture of this product to ensure that you get many years of

trouble free service. However, it is important that you read the

descriptions, installation and operating instructions carefully prior to

installing or using your new indirect ophthalmoscope.

The K-LED II Headlamp has been designed to be used in dental and

surgical environments, to illuminate areas under examination by the user.

Please read and follow these instructions carefully.

Home

Back

3. Symbols

Read user instructions for warnings, cautions and

additional information

The CE mark on this product indicates it has been

tested to and conforms with the provisions noted

within the 93/42/EEC Medical Device Directive

Double insulated

Manufacturer's name and address

This Symbol on the product or on its packaging

and instructions indicates that it was put on the

market place after August 2005 and that this

product shall not be treated as Household Waste

Type B protections against shock

Mandatory action sign

Follow instructions for use

High voltage

Trip hazard

Optical radiation hazard

Hot surface

This way up

Keep dry

Fragile

Material suitable for recycling

Keep dry

Material suitable for recycling

Home

Back

4. Safety

Device classification

CE Regulation 93/42 EEC: Class I

FDA: Class II

Carefully read this Instruction Section before using your Keeler

product. For your own safety and that of your customers

observe all cautionary information provided in this section. The

following information is intended to highlight potential safety

hazards that can be associated with misuse, or damage.

Warnings and cautions

Warning

• Check your Keeler product for signs of transport / storage

damage prior to use

• Do not use if the product is visibly damaged, and periodically

inspect for signs of damage

• Do not shine directly into a person’s eye. Do not stare into the

light when in use. May be harmful to eyes

• Do not hold magnifying glasses or any other optical system in

front of the light

• Do not use in the presence of flammable gases / liquids, or in

an oxygen rich environment

• This product should not be immersed in fluids

• Do not disassemble or modify the battery. There are no

serviceable parts inside

• Do not dispose of battery in fire, puncture or short circuit

• Do not use a battery that is deformed, leaking, corroded or

visually damaged. Handle a damaged or leaking battery with

care. If you come into contact with electrolyte, wash exposed

area with soap and water. If it contacts the eye, seek medical

attention immediately

• US Federal law restricts this device to sale by or order of a

physician or practitioner

Do not fit mains power adapter into a damaged mains

outlet socket

Route power cords safely to eliminate risk of tripping or

damage to equipment

LED’s can reach high temperatures in use – allow to cool

before handling

After removal of the LED do not

touch the LED contacts and the

patient simultaneously

Home

Back

4. Safety

Caution

• Use only genuine Keeler approved parts and accessories or

device safety and performance may be compromised

• Use only Keeler approved batteries, chargers and power

supplies as per the accessories listed in section 11

• Ensure the equipment is positioned in such a way that it can

be disconnected from the mains easily

• The product has been designed to function safely when at an

ambient temperature between +10°C and +35°C

• Keep out of the reach of children

• To prevent condensation from forming, allow instrument to

come to room temperature before use

• For indoor use only (protect from moisture)

• When replacing lithium battery pack, turn K-LED II off and

attach new pack

• Remove battery pack when device may not be used for

prolonged periods

• Do not charge battery in any environment where the

temperature may exceed 40˚C or fall below 0˚C. There are no

user serviceable parts inside. Contact authorised service

representative for further information

• Ensure device is securely held in docking station to minimise

risk of injury or damage to equipment

• Follow guidance on cleaning / routine maintenance to prevent

personal injury / damage to equipment

Switch off the electrical supply and disconnect from

the mains electrical supply before cleaning and inspection

• Dispose of batteries in line with local environmental

regulations

• At product end of life dispose of in accordance with local

environmental guidelines (WEEE)

Note: Lithium Ion batteries contain no toxic heavy metals

such as mercury, cadmium or lead

Home

Back

5. K-LED II Headlamp and charging units

Description of the Product

A Power supply and adaptors

B Rechargeable battery pack

C Single charger storage unit

D Double charger storage unit

E LED light source

F Connector

Home

Back

6. Fitting the K-LED II Headlamp to your loupe frame

1 To remove the loupes from the

frame, hold the loupe bar between

your thumb and forefinger of one

hand and pull away from the hinge

held in your other hand.

2 Attach the LED light to the loupe bar.

Ensure that the LED light is fitted

correctly and held securely in position,

as shown.

3 Re-attach the loupes and LED light to

the frame hinge by holding the loupe

bar as before.

Locate the hinge pins into the loupe

bar holes and push the loupes onto

the hinge.

Home

Back

6. Fitting the K-LED II Headlamp to your loupe frame

4 If the LED light is to be used on its own without loupes,

attach the Light to the Adaptor PD bar as shown. Attach the

cable to the frame using the Velcro strap provided.

5 Connect the LED light lead into the

connector port on top of the battery pack.

Andere Handbücher für K-LED II

Inhaltsverzeichnis

Andere Keeler Scheinwerfer Handbücher

Keeler

Keeler K-LED II Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

YLP

YLP Panda 4.0 Einrichtungshandbuch

Petzl

Petzl IKO Bedienungsanleitung

SportsTek

SportsTek Lightwear 4in1 LED Headlamp Bedienungsanleitung

Petzl

Petzl ACCU SWIFT RL Bedienungsanleitung

Ferei

Ferei HL 20 II Bedienungsanleitung

Wolf

Wolf H-251AII Bedienungsanleitung

Princeton Tec

Princeton Tec Byte Handbuch

Princeton Tec

Princeton Tec REMIX Handbuch

Ferei

Ferei HL08 II Bedienungsanleitung

Syris

Syris v900L Handbuch

LumaPro

LumaPro 49XX93 Bedienungsanleitung

Atmos

Atmos HL 21 Bedienungsanleitung

BGS technic

BGS technic 85327 Bedienungsanleitung

Coast

Coast HL7R Bedienungsanleitung

Pelican

Pelican 2755 Bedienungsanleitung

GP CHR35 Bedienungsanleitung

StreamLight

StreamLight ENDURO PRO Bedienungsanleitung

Princeton Tec

Princeton Tec VIZZ II Handbuch