Table of contents
SAFETY INSTRUCTIONS
Before using the equipment or product, and for the safety of yourself and others, you must
read the safety instructions and instruction manual and understand their contents. Always
keep the safety instructions and operating manual handy for users of the equipment or prod-
uct. For the safety of both yourself and others, it may be a good idea to read through the
safety instructions every now and then. If the safety instructions or instruction manual gets
damaged or in any other way cannot be used, new copies may be ordered from:
Kellfri AB, Munkatorpsgatan 6, SE-532 40 SKARA, Sweden. Tel: +46 511 242 50
The safety instructions can also be downloaded from Kellfri’s website: www.kellfri.co.uk
Do not use the equipment or product if you feel ill, tired or are under the inuence of alcohol.
Do not use the equipment or product if you are taking prescribed medication or drugs, or suf-
fering from severe depression or mental illness. Always comply with general rules of the road
and applicable rules stipulated by animal welfare legislation. People under the age of 15 and
those suering from mental illness are not allowed to use the equipment.
PRODUCT SAFETY INFORMATION
• Carefully read the operating manual before using the product. The product may only be
used in the way described in these operating manual.
• The product may only be used outdoors.
• Keep the work area clear of other people, moving parts increase the risk of accidents.
Respect the equipment’s risk zone! Only the operator may be present in the vicinity of
the machine while it is in operation. Children must never be present within the work area,
never let children operate the machine.
• The equipment functions optimally and most securely when it is used in the capacity for
which it is intended, do not attempt to use any means to increase the machine’s capacity.
• Never overload the machine.
• Never leave the machine unsupervised when it is running. Switch o the tractor's engine
and apply the parking brake when you leave the equipment – even for a short period.
• Never leave the machine in a raised position. There can be a loss of pressure in the hy-
draulics and the machine can drop to the ground.
• Ensure that all guards are in place and are not able to come loose before use.
• The entire length of the PTO shaft must be protected. Make sure that the safety chain is
well anchored.
• The machine must always be disengaged when undergoing maintenance or service work.
• The machine must not be used without the infeed chute or the infeed hopper.
• Do not operate the chipper if it is vibrating substantially; stop the machine immediately
and check the maintenance schedule.
• Do not use the machine until all precautionary measures have been taken.
• Do not climb on the chipper!
• NEVER try to remove objects that have got caught in the chipper while it is running. Make sure
that the machine has stopped rotating before taking any action. Wait at least ve minutes.
• NEVER put parts of the body into the chipper while it is running.
• The machine must only be lifted using the designated lifting points. Only use suitable
lifting equipment with sucient lifting capacity to lift the machine.
Warning!
The original design of the machine must not, under any circumstances, be modied without
the approval of the manufacturer. Unauthorised modications and/or accessories may cause
life-threatening injuries or death to users and others.
