Kenmore Sears refrigerator Bedienungsanleitung

Re rige 'ators

Record Your Model and Serial Numbers .............. Cover

Important Safety Instructions ....................................... 2

First Steps ....................................................................... 3

Energy Saving Ideas .............................................. ;....... 4

Setting the Controls ...................................................... 4

Temperatures ............................................................ 4

Energy Saver Switch ................................................ 4

Moisture .................................................................... 4

Fresh Food Storage ........................................................ 5

Care and Cleaning ..................................................... 6-7

Automatic Ice Maker (some models) ............................ 7

Reversible Door Instructions ................................... 8-,10

Avoid Service Checklist ......................................... 10-11

Normal Operating Sounds .......................................... 11

Sears Service ................................................................ !2

Refrigerator Warranty ................................................ 12

Sears Service in Canada .............................................. 13

Warranty (Canada) ...................................................... 14

Read and Save These Instructions

This Owner's Guide contains genera1operating instructions for your refrigerator and features information for several models

Your refrigerator may not have all the described features Use your refrigerator only as instructedin this guide These

instructionsare not meant to cover every possible condition and situation that mayoccur Common senseand caution must

be practiced when installing, operating, and maintaining any appliance

Record Your Model and Serial Numbers

Record the model and serial number in the space provided below The serial plate is located on the top left wail of the

refrigerator compartment

Model Number:

Serial Number:

Purchase Date:

PRINTEDINUSA P/N 218905300 (9812)

Important Safety

Instructions

Proper Disposal of

Your Refrigerator/Freezer

Risk of child entrapment

Child entrapment and suffocation are

not problems of the past Junked or

abandoned refrigerators or freezers are

still dangerous-- even if they will sit for

"just a few days" If you are getting rid

of your old refrigerator or freezer, please

follow the instructions below to help

prevent accidents,

BEFOREYOU THROW AWAY YOUR

OLD REFRIGERATORJFREEZER:

Remove

doors.

Leaveshelves

in place so

children may

not easily

climb inside.

Avoid fire hazard or

electric shock. Do not use an extension

cord or an adapter plug Do not remove

any prong from the power cord

Groundinc

wall

Power supply

cord witti 3-prong

grounding plug

Read all instructions before using this refrigerator.

For "(our Safety

Do not storeor usegasoline or other flammable vapors and liquids in the vicinity of

this or anyother appliance Readprod uct labelsfor flammability and other warnings,

Child Safety

= Destroy carton, plastic bags, and any exterior wrapping material immediately

after the refrigerator is unpacked. Children should never'use these items for

play, Cartons coveredwith rugs, bedspreads, plastic sheetsor stretch wrap may

become airtight chambers and can quickly cause suffocation

• Remove all staplesfrom the carton, Staples can cause severe cuts and destroy

finishes if they come in contact with other appliances or furniture

°An empty, discarded ice box, refrigerator or freezer is a very dangerous

attraction to chifdren Remove the door of any appliance that is not in use,

even if it is being discarded

Electrical Information

These guidelines must be followed to ensure that safety mechanisms in

the design of this refrigerator will operate properly.

°The refrigerator must be plugged into its own 1t5 Volt, 60 Hz, AC only

electrical outlet, The power' cord of the appliance is equipped with a three-

prong grounding plug for your protection against shock hazards. It must be

plugged directly into a properly grounded three-prong receptacle The

receptacle must be installed in accordance with local codes and ordinances

Consult a qualified electrician DO NOT USEAN EXTENSIONCORD OR AN

ADAPTERPLUG

o If voltage varies by 10 percent or more, performance of your refrigerator may

be affected Operating the refrigerator with insufficient power can damage the

compressor. Such damage is not covered under your warranty If you suspect

your voltage ishigh or low, consult your power company for testing,

. To prevent the refrigerator from being turned off accidentally, do not ptug the

unit into an outlet controlled by a wall switch or pull cord,

• Do not pinch, knot, or bend the power cord

Other Precautions

° Neverunplug the refrigerator bypulling on the power cord,Always grip the plug

firmly and pull straight out from the receptacle.

° To avoid electrical shock, unplug the refrigerator before cleaning and before

replacing a light bulb. Note: Turning the refrigerator control to OFFturns off

the compressor, but does not disconnect power to the light bulb or other

electrical components

• Do not operate the refrigerator in the presence of explosive fumes,

° Ifyour refrigerator hasanautomatic icemaker, avoidcontact with moving parts.

_ - _- __

First Steps

3= AIR SPACE

Clearance

Proper air circulation and leveling will

ensure efficient operation

Screw_type Levelers (some models)

LOWER

CABINET

Exposed bolt (some models)

LOWER

CABINET

Sunken bolt (some models)

Before starting the refrigerator, follow these important first steps:

Location

Choose a place that is near a grounded electrical outlet, DO NOT use an

extension cord or an adapter plug

= If possible, place the refrigerator out of direct sunlight and away from the

range, dishwasher or other heat sources

• The refrigerator must be installe_don a floor that is level and strong enough

to support a fully loaded refrigerator

• Consider water supply availability for models equipped with an automatic ice

maker

Installation

• Do not install the refrigerator where the temperature wilt drop below 60°F

(t 5°C) or riseabove t 10% (43°C) Thecompressor will not be able to maintain

proper temperatures

= Allow space around the unit for good air circulation, Leavea ! inch (25 ram)

space behind and a 3 inch (75 ram)space above the refrigerator for adequate

circulation

• In a recessed installation, allow an extra t/2 inch (10-15 ram) on each side

for ease of installation

o Forbest circulation, elevate the unit 1 inch (25 ram) from the floor, especially

if the floor iscarpeted

Door Opening

The doors should open to allow easyaccessto a counter when removing food

-Do not position the refrigerator so you have to walk around the refrigerator

doors

• Reversethe doors if necessary See "Reversible Door Instructions,"

Leveling

All four corners of refrigerator must rest firmly on a solid floor, Some models are

equipped witln adjustable screw-type levelers Others areequipped with rolters If

your refrigerator did not come with rollers, they canbe purchased from your dealer

Refer to the Toe Grille Assembly Instruction Sheetin the literature pack to remove

the Toe Grille (some models),

•To adjust screw-type levelers (some models): Tipcabinet back slightly and

raiseadjusting bolts as needed,

° To adjust front rollers (some models): Use a screwdriver, 3/8" socket

wrench, or nutdriver to adjust rollers as shown,

RAISETHE FRONT of cabinet enough so doors will close freely when opened

halfway Levelcabinet sideto side Referto the Toe GrilleAssembly Instruction Sheet

in the literature pack to replace the Toe Gritle (some models),

Cleaning

o Wash the inside, all removable parts and the outside with mild detergent and

warm water Wipe dry DO NOT USE HARSH CLEANERS ON THESE

SURFACES°

• Do not use razor blades or other sharp instruments which can scratch the

appliance surface, when removing adhesive labels, Any glue left from the

tape or energy label can be removed with a mixture of warm water and mild

detergent, or touch the residue with the sticky side of tape already removed,

. DO NOT REMOVETHESERIALPLATE

Energy Saving Ideas °Locate the refrigerator in the coolest part of the room, out of direct sunlight and

away from heating ducts or registers Do not place the refrigerator' next to heat-

producing appliances such asa range, oven or dishwasher, if this is not possible,

a section of cabinetry or an added layer of insulation between the two appliances

will help tile refrigerator operate more efficiently

•Level the refrigerator so the doors close tightly

• Refer to this Owner's Guide for the suggested refrigerator settings

•Periodiccleaning of the condenser will help the refrigerator run more efficiently,

See Outside in the "Care and Cleaning" section

• Do not overcrowd the refrigerator or block cold air vents Doing so causes the

refrigerator to run longer and usemore energy, Shelvesshould not be lined with

aluminum foil, wax paper or paper towelingUners interfere with cold air

circulation, making the refrigerator less efficient, which could cause food

spoilage

, Cover foods and wipe containers dry before placing them in the refrigerator, This

cuts down on moisture build-up inside the unit,

•Organize the refrigerator to reduce door openings Remove as marly items as

needed at one time and close the door as soon aspossible

Setting the Controls

_ _:.::C I_!LIII :': _TOR:: :i :, :::::/

RefrigeratorControl

Freezer Control

Energy Saver

Cool Down Period

Toensure safefood storage, allow the refrigerator to operate with the doors closed

for at least 8 to 12 hours before loading with food.

Refrigerator and Freezer Controls

° To start out, set control dials to the midpoint for a trial period of 24 hours

Temperatures

o After 24 hours, adjust the controls as needed. Adjust temperatures one

number at a time. For colder temperatures, turn the dial toward COLDEST.

Forwarmer temperatures, turn the dial toward COLD The temperature will

increase or decrease, but not necessarilyby 1, 2, or 3 degrees

An adjustment made to one compartment may require an adjustment to the other

o Turning the refrigerator control will change the temperature in BOTH

compartments If the refrigerator control is turned to OFF, cooling

stops in both compartments.

,, Turning the freezer control will change only the temperature in the freezer

compartment

To maintain temperatures, a fan circulates air in the refrigerator and freezer

compartments. Forgood circulation, do not block cold air vents with food items.

Energy Saver Switch (some models)

tfyour refrigerator isequipped with an Energy SaverSwitch, keep it set on ENERGY

SAVERfor lowest energy usage.

Moisture

During humid weather, or if moisture appears on the cabinet between the doors,

set switch to REDUCEEXTERIORMOISTUREA heater will warm the surface and

allow moisture to evaporate.

Fresh Food Storage

: i i :

Sliding Shelf

CantileverShelf

:i !i :

Combination Cantilever/Sliding Shelf (some models)

Humidity Control

Wine Rack

Shelf Adjustment

Refrigerator shelvesare easilyadjustable to suit individual needs Some models have

sliding shelves, others havecantilever shelves Before adjusting shelves, remove alf

food. Theshipping clipswhich stabilize the shelvesfor shipping may be removed and

discarded

Remove Shipping Clips

Toadjust sliding shelves, remove by pulling forward to

thestop position, then lift the front edge up and pull out.

Replaceon any pair of railsby reversing this procedure

To adjust cantilever shelves (shelves supported at the

rear of the refrigerator), tilt the back of the shelf up and

out Replace shelf by inserting hooks at rear into slots

Lower and lock into position

Toadjust combination cantilever/sfiding shefves,remove

shelf by lifting hook out of rear slot, and sliding shelf

forward to the stop position Lift up front edge and pull

out Replaceshelf by sliding shelf back on supports, and

inserting the hook into the respective middle slot

Spifl ProoFMgtassshelves(some models) catch and hold accidental spills. In some

models, the Spill ProofTM shelvesslideout for easyaccessto food and fast cleaning.

Theshelvesslideout independently of the cantilever brackets.Just pull front of shelf

forward Shelfcanbeextended asfar asstopper ,willallow and isnot removable from

the cantilever bracket.

Door Storage

Door racksand door binsallow convenient storage of jars,bottles, and cans Items

usedoften are availablefor quick selection Somemodels havedoor rackswhich can

accommodate gallon_size plastic drink containers and economy size jars and

containers which are available today

Somemodels haveadjustable door binswhich canbe moved to suit individual needs

Removebins by lifting straight up Placebins in the desired position and lower over

the supports

The Dairy compartment is warmer than the general food storage section and is

intended for short term storage of cheese, spreads, or butter

Crispers

The Crispers, located under the bottom refrigerator shelf, are designed for storing

fruits, vegetables, and other fresh produce, Wash items in clear water and remove

excesswater before placing inthe Crispers Items with strong odors or high moisture

should be wrapped before storing

TheHumidity Controls allows you to adjust the humidity within the Crisper Thiscan

extend the life of fresh vegetables which keep best in high humidity Leafy

vegetables, however, keep best when stored with the Humidity Control set on high

moisture, or in a drawer without a Humidity Control This keeps incoming air to a

minimum and maintains maximum moisture content

Meat Pan (some models)

Some models are equipped with a Meat Pan that can be positioned below any

refrigerator shelf Usethis pan for short term storage of bulk meat items tf meats

are to be kept longer than 1 or 2 days, they should be frozen

Wine Rack (some models)

The wine rack storesbottles of wine, or 2-liter plastic bottles of juice or soda pop.

To install,slide thewine rackonto the shelf with the curve facing in To remove, slide

the wine rack out Install on either side of a Spill Prooff_ shelf

Care and Cleaning

Damp objects stick to cold

metal surfaces Do not touch refriger-

ated surfaces with wet or damp hands

To avoid damage and help

the refrigerator run as efficiently as

possible, clean the condenser

periodically.

DEFROST

WATER

PAN

Keep your refrigerator and freezer cleanto prevent odor build-up Wipe up any spills

immediately and clean both sections at least twice a year Never use metallic

scouring pads, brushes,abrasivecleanersor strong alkaline solutions on any surface

Do not wash any removable parts in a dishwasher.

Always unplug the power cord from the wall outlet before cleaning. Turning

the control to OFFdoes not disconnect power to the controls, light bulb, or other

electrical components

Inside

Wash insidesurfacesof the refrigerator and freezer with a solution of 2 tablespoons

baking soda in ! quart warm water. Rinse and dry thoroughly, Be sure to wring

excess water out of sponge or cloth before cleaning around the controls,

light bulb, or any electrical parts.

Wash removable parts such asshelvesand drawers with baking soda solution or mild

detergent and warm water. DO NOT USE HARSH CLEANERS ON THESE SUR-

FACES.Rinseand dry thoroughly. Cleanthe door gaskets with mild suds, rinsewith

clearwater and wipe dry Do not userazor bladesor other sharp instruments which

canscratch the appliance surface when removing adhesive labels.Any glue left from

the tape or energy label can be removed with a mixture of warm water and mild

detergent, or, touch the residue with the sticky sideof tape already removed DO

NOT REMOVE THE SERIAL PLATE.

Outside

Wash the cabinetand handleswith warm water and mild tiquiddetergent_ Rinsewell

and wipe dry with a clean soft cloth

When moving the refrigerator, pull straight out Do not shift the refrigerator from

side to side asthis may tear or gouge the floor covering If the refrigerator has an

automatic ice maker, be careful not to move the refrigerator beyond plumbing

connections

Periodically clean the condenser (black tubes and wires on the back of the

refrigerator) Using a vacuum with its dusting tool attachment, vacuum the coilsto

remove dust build-up Do not allow lint or dust to accumulate on the coils,

Thedefrost water pan is located at the bottom rear of the refrigerator on top of the

compressor (shown left) The pan should be cleaned periodically. Wipe clean with

a damp cloth

Replacing the Light Bulb

To replace the light bulb:

1 Unplug the refrigerator.

2 Wear gloves asprotection against possible broken glass

3 Replace old bulb with an appliance bulb of the same wattage.

4. Remember to plug the refrigerator back in

Care and Cleaning

(continued)

Vacation and Moving Tips

Short vacations: Leavethe refrigerator operating during vacations of 1to 3weeks

Use up all perishable items from the refrigerator section Wrap and store other

items in thefreezer If the unit hasan automatic ice maker,turn off the icemaker.

Long vacations: Removeall food and iceifyou will be gone I month or more. Turn

the control to OFFand disconnect the power If the unit has an automatic ice

maker, turn off the ice maker and turn the water supply valve to the closed

position Defrost and clean the interior thoroughly Leaveboth doors open to

prevent odor and mold buildup Block open if necessary

Moving: When moving the refrigerator, follow these guidelines to prevent

damage:

• Remove all food and other items from both the refrigerator and freezer

compartments Empty the ice storage bin Defrost and clean the

interior thoroughly

•If a hand truck isused in moving, load the refrigerator from the side

o Turnfront rollers asfar up aspossible (some models) Thiswil! protect them

during sliding or moving

• The cabinet should be well padded and handled with care DO NOT

DROP°

Automatic ice Maker If your refrigerator hasan automatic ice maker, it will provide a continuous supply

of icefor normal use, Theautomatic ice maker isan optional accessorywhich may

be installed in most models at any time, Call your local dealer for installation

After the plumbing connections havebeen completed, the water supply valve must

be opened Placethe ice container under the ice maker, pushing it asfar back as

possible Lower the wire signal arm to its "down" or ON position Becauseof new

plumbing connections, the first production of ice cubes may be discolored or have

an odd flavor Throw the iceaway until the cubes made arefree of discoloration and

taste Rememberthat water quality determines your icequality tt isbest to connect

the ice maker to water that is not softened Chemicals from a malfunctioning

softener can damage the i,remaker If the ice maker isconnected to soft water,

ensure the softener ismaintained and working properly

To stop the ice maker, lift the wire signalarm until it clicksand locks in the "up"

or OFFposition Theice maker turns off automatically when the ice container isfull

If your model hasan adiustable freezer shelf, placethe shelf sothe wire signal arm

wil! hit the ice when the ice container is full.

Ice Maker Tips

1 Icestored too long may develop an odd flavor. Emptythe container and be sure

the wire signal arm is in its "down" or ON position The ice maker will then

produce more ice

2, Occasionally shake the container to keep ice separated

3 Keep the wire signal arm in its "up" or OFFposition until the refrigerator

isconnected to the water supply or whenever water supply is turned off

4 Certain sounds are normal when the ice maker is operating° They are:

Motor operation

Icebeing loosened from the tray

Ice being dropped into the container

Running water

Water valve opening and closing

Formore information on these operations, see "Normal Operating Sounds"

5. Wash ice container in warm water with mild detergent Rinsewell and dry

6 Stop the ice maker when cleaning the freezer or for short vacations

7 If the ice maker will be turned off for a long period of time, turn the water supply

valve to the closed position

Reversible Door

Instructions

NOTE: Some models have "pocket"

handles, which are recessedinto the

side of the door On these models,

only the hinges will need to be re-

versed A handle is built into both

sides of each door

1. Refer to the Toe Grille Assembly

Instruction Sheet in the literature pack to

remove the Toe Grille (some models)•

Snap off hinge cover at top of cabinet

(some models) With the freezer door

closed, remove the two screws attaching

upper hinge to cabinet Lift the hinge up

and off. Be sure to save screws and

hinge for reassembly later.

HingePln

Lower Hinge crews

Washer

_£)_ Htlnge

Lewe/Hinge Screws

4. Removehinge pin, hinge, and the two

screws attaching the lower hinge Save

the hinge, hinge pin, washer (some

models) and screws for reassembly

later.

Your refrigerator isequipped with convertible door hinges Hinging of the door can

be changed to the opposite side any time you wish An envelope containing extra

plastic hole plugs isincluded in some models Turn the refrigerator control to OFF,

Removeall food, bottles, and other items from the door Begin with freezer door

Completely remove one door before beginning the other,

Tools Necessary: ,_ _ !_ P_t_/

Phllll S__:_ I )R__!_O Adlu_oblo

screwdriver Wrench Set U _ Wrench

3, With the refrigerator door closed,

remove center hinge pin (Note the

arrangement of the upper and lower

washers (some models) on the hinge pin

The washers must be assembled later in the

same manner) Open refrigerator door

enough to allow door to be lifted off the

lower hinge Remove the two screws

attaching the center hinge The third

outermost screw under the center hinge

should be left in place Save hinge, pin,

and washers (some models) for

reassembly later. Reinstall screws in

original holes

5. Carefully remove the hole plugs from

the hinge holes in the center mullion and

top of cabinet and reinstall in the

opposite set of holes

_ Screws

Freeze_ Door

,_ _<-- Screw

RefrigeratorDoor

6. After the handles a_e removed (see

steps 7 and 8), remove door stop from

bottom of freezer and refrigerator door

and reinstallon opposite side

Reversible Door

Instructions (continued}

Freezer Door Lock Handle Over

Dovetail Sutton

Dovetai_

Sutton

HolePlug

crews

7, Reversehandleswhiledoorsareoff Removethe

two screwsattachingthe handleto the bottom of

the freezer door Swing bottom of handle away

from the door and slidehandleup and off dovetail

button Removescrew and dovetail button and

install on other side, moving hole plug from

corresponding hole to the opposite side, Reverse

instructions for reattaching handle, Start with

handle offset away from the door Placetop of

handleover dovetail buEon,swing handle into an

upright position and push upward, locking it into

place Securebottom of handlewith screws

Hinge Pin

Washer

Screws Lower Hlnge

Washer /

9. If your refrigerator doesnot havea ToeGrille,

usea putty knife to removethe plastic plug (not

shown) from front of base and reinstall in the

opposite set of lower hinge holes Assemble

lower hinge to cabinet Install hinge pin in

opposite hinge hole from which it was removed

Install the washer (some models) on the lower

hinge pin and insert hinge screws, but do not

tighten Hingeswill haveto remain looseagainst

cabinet to align door

Trim Lock Adhesive

Trim Lock

8, To remove handle: Pull

down to slidetrim off bottom of

handle Removethe two screws

attaching the handle to the top

of the refrigerator door Swing

the top of handle away from the

door andslide handledown and

off dovetail button Remove

screw and dovetail button and

installon otherside, movinghole

plugsfrom corresponding holes

to the opposite side Reverse

instructions for reattaching

handle Start with the handle

offset awayfrom the door Place

bottom of handle over dovetail

button, swing handle into an

upright position and push

downward, locking itinto place

Secure top of handle with

screws Replacetrim,

Trim Removal (Full-Length Trim models only):

In some models, the refrigerator door has a fu!! length trim piece which

continues from the bottom of the handle to the bottom of the door The top of

the trim fits around the base of the handle An adhesive "trim lock" ispositioned

about half-way down The bottom of the trim is held in place by either an

adhesive trim lock, or a trim lock with two prongs inserted into a hole on the

face of the door Remove the trim by gently pulling the trim lock areas out and

away from the door When the trim is free from the door, gently pull the trim

down and away from the base of the handle, using a slight side to side motion

To reattach trim: Slideboth trim locksout of trim Insertthe new adhesivetrim

lockscontained inyour literature pack NOTE: Trim lock must be removedand

installed by sliding OVERthe two donut shapedareas Install trim to handle by

sliding over baseof handle Carefully align trim and press down at trim lock

locations Replacehole plug on opposite side Userubbing alcohol to remove

any adhesiveresiduefrom old trim lock location(s)

.Center Hinge

(upside down)

Hole Plug

10. Turn center hinge upside down and secure to

cabinet as shown, using the screws which are in

the new holes Install refrigerator door on lower

hinge pin Align door with edge of cabinet Hold

the door on front of cabinet

•:_ -= ........

Reversible Door

Instructions (continued)

Washer

Hinge Pin

Cente_

11. Placeoriginal washer (some models)

over hole in refrigeratordoor and line up

hole in center hinge. Insert hinge pin

through both holes Placewasher (some

models) on hinge pin, then position

freezer door on center hinge

12. Remove plug from upper bearing

of door and reinstall on opposite side,

Hinge

13. Assembleupper hinge to top of cabinet

and door Useopposite set of holes Do not

completelytighten screws

Align doorssothereisa parallelgap between

doors Adjust doorsto cabinet so gasketsseal

but do not bind Tighten upper and lower

hinge screws

Additional adjustmentmay be necessaryafter

loading thedoor shelvesReturnfood, bottles,

and other articles to doors Turn the

refrigerator control on and to the

previous setting.

Referto the Toe Grille Assembly Instruction

Sheetinthe literaturepack to replacethe Toe

Grille (somemodels)

Avoid Service Checklist Before calling for service, review this list tt may save you both time and expense

This list includes common occurrences that are not the result of defective

workmanship or materials in this appliance

OCCURRENCE SOLUTION

RUNNING OF REFRIGERATOR

Refrigerator compressor does not

run. Refrigerator control is set to OFF Turn on refrigerator control See Setting the Controls_

Plug at wall outlet is disconnected Be sure plug is tightly pushed into outlet

House fuse has blown or circuit breaker has tripped Check and/or replace fuse with a 15 amp

time-delay fuse Reset circuit breaker

Power outage Check house lights Call local electric company

Refrigeratorrunstoo muchor too

long. Refrigerator islarger than the previous one you owned This isnorma!, Larger, more efficient units

require longer running time,

Room or outside weather is hot It is normal for the refrigerator to work longer under these

conditions

Automatic ice maker is operating (some models) Operation of the ice maker causes the

refrigerator to run slightly more

Doors areopened too frequently or too tong Warm air entering the refrigerator causes it to run

more Open the doors tessoften

Refrigerator or freezer door may be slightly open Make sure refrigerator islevel, Keep food and

containers from blocking door

TEMPERATURES ARE TOO COLD OR TOO WARM

Temperatures in either compartment are too cold or too warm See Setting the Controls.

Andere Handbücher für Sears refrigerator

Inhaltsverzeichnis

Sprachen:

Andere Kenmore Kühlschrank Handbücher

Kenmore

Kenmore 795.75082.401 Bedienungsanleitung

Kenmore

Kenmore 795.75002.402 Bedienungsanleitung

Kenmore

Kenmore 970-7070 SERIES Bedienungsanleitung

Kenmore

Kenmore Elite Trio 795.7873 Series Bedienungsanleitung

Kenmore

Kenmore 4048 - Pro 29.5 cu. Ft Bedienungsanleitung

Kenmore

Kenmore 795.72033 Bedienungsanleitung

Kenmore

Kenmore 795.7103 Series Bedienungsanleitung

Kenmore

Kenmore 795.7204 Bedienungsanleitung

Kenmore

Kenmore 795.5137 Bedienungsanleitung

Kenmore

Kenmore 795.7940 Series Bedienungsanleitung

Kenmore

Kenmore 596.6533?602 Bedienungsanleitung

Kenmore

Kenmore 4412 - Pro 16.5 cu. Ft. Professional Size... Bedienungsanleitung

Kenmore

Kenmore Kenmore Side by Side Refrigerator Bedienungsanleitung

Kenmore

Kenmore Kenmore Refrigeratore Bedienungsanleitung

Kenmore

Kenmore Side by side refrigerator Bedienungsanleitung

Kenmore

Kenmore Elite Side by Side Refrigerator Bedienungsanleitung

Kenmore

Kenmore 7930 - 22.0 cu. Ft. Top Freezer Refrigerator Bedienungsanleitung

Kenmore

Kenmore 240461300 Bedienungsanleitung

Kenmore

Kenmore 106.86399310 Bedienungsanleitung

Kenmore

Kenmore Elite 44723 Bedienungsanleitung

Kenmore

Kenmore 111.9903 Series Bedienungsanleitung

Kenmore

Kenmore 795.7032 series Bedienungsanleitung

Kenmore

Kenmore 795.7854 Bedienungsanleitung

Kenmore

Kenmore KENMORE 53471 Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung