Kenroy Home VALE Installationsanleitung

Care and Instruction Manual

VALE WALL FOUNTAIN

51055ORB ASSEMBLY INSTRUCTIONS

Thank you for purchasing a Kenroy Home

water feature, you are now only minutes

away from ﬁlling your home or outdoor living

space with peaceful displays. Our guarantee

backs all of our water features, please do

not hesitate to contact our

Customer Support Team for

resolutions to any parts or

installation concerns.

CUSTOMER SUPPORT TEAM

For any additional questions or concerns please contact our

Customer Support Team:

904-642-4340

@KenroyHome

customerorders@kenroyhome.com

51055ORB ASSEMBLY INSTRUCTIONS

Please reference the separate parts list and ensure that

all pieces are included in the package prior to assembly.

SUGGESTED TOOLS NOT SUPPLIED

PHILLIPS

SCREWDRIVER

DRILL LADDER PENCIL SAFETY GOGGLES LEVEL

More than one person may be required to

complete the assembly of this product.

To protect the ﬁnish, place all parts

on a soft surface when unpacking.

When assembling ensure that all parts are ﬁrmly tightened.

Choose a location:

is water feature is designed to be wall mounted.

is water feature is designed to be used indoors or

outdoors. Do not place on a surface that may be

damaged by water as splashing may occur.

Also consider the location of your power source.

e pump and light cord reach 9' from the pump

access door of the fountain body to the plugs, and

should be connected to a grounded 110V outlet.

For best results the water feature should be hung on

a at surface.

Please carefully open on a so surface to

avoid damage.

Insert the light assembly (I) into the slot on back

of fountain body (B).

51055ORB ASSEMBLY INSTRUCTIONS

Place roof (A) onto the fountain body (B) and

secure with clips on back of fountain body (B).

Attach the pump (G) to the rubber hose.

Rubber

hose

Clips

Slot

51055ORB ASSEMBLY INSTRUCTIONS

Place pump access door (C) into fountain body (B)

to cover the entry.

Peel paper backing from the wall spacer pad (K) and

apply to back of the fountain body (B).

Place mounting bracket (D) on wall in desired location,

ensure it is level and mark holes. Drill 6 mm (1/4”)

pilot holes on marked spots and insert (3) anchors (M).

Secure mounting bracket (D) to wall with (3)

supplied screws (L) and hang fountain assembly

mounting bracket (D).

Hole in

wall

Fountain

assembly

(If fastening to studs, skip this step.)

Optional, if not using cord covers skip to step 7.

Place cord channel (F) on wall and mark holes. Drill

6 mm (1/4”) pilot holes on marked spots and insert

(2) anchors (M).

(If fastening to studs, skip this step.)

Attach cord channel (F) to wall with (2) supplied

screws (L). Place cords inside cord channel (F) and

press (2) cord covers (E) rmly on channel to secure.

51055ORB ASSEMBLY INSTRUCTIONS

Fill the fountain body (B) with

0.85 gallons of distilled water.

Place decorative river stones (J)

onto pump access door (C).

Connect the light connectors

(H) and (I) and screw the cap

tightly.

Plug light transformer (H) and

pump (G) into outlets and

turn light on at switch.

Use water guiding pad (N) to

brush the fountain face.

FINAL STEPS

Note: Light does not have to be on to operate pump.

Hole in

wall

51055ORB ASSEMBLY INSTRUCTIONS

PUMP SAFETY & TROUBLESHOOTING

To clean the pump

Unplug the pump from the electrical

outlet. Use a small soft brush or place it

If the pump fails to run:

• This pump has an overheating protection feature that will turn o

the pump when it becomes too hot while not covered with water.

It may take a few minutes for the pump to cool down once it is

submerged in water again. Note: the pump may cycle on and o

as it cools and heats if not covered with water.

• Pump may be air locked, unplug and plug pump in several times to

clear trapped air.

• Check circuit breaker, or try a dierent outlet.

• Check tubing for kinks and obstructions.

• Clean out any algae buildup.

• Remove the front cover & impeller cover to access the impeller area.

Turn the rotor to ensure it is not broken or jammed.

With low ow rate, the pump will spew or “burp”:

• Check the water level to make sure the pump is completely

submerged, water should always be above the min ll line (not

all water features include min ll line).

under a water stream to remove debris.

To keep water clean

Periodically change water

to prevent algae buildup.

Suction cup

Back cover

Pump housing

Tube

Rotor/Impeller

Impeller cover

Front cover

Flow regulator

• Splashing may occur when the fountain is rst turned

on, protect surrounding surfaces as needed.

Do not place the water feature on or near

any surface that can be damaged by water.

• To reduce the risk of electrical shock, always disconnect

the power supply before working with the water feature.

• Keep small children and pets away from the water

feature; they can fall into the water feature and drown.

• Once a week inspect water feature, oor and adjacent

wall for moisture build-up and clean as necessary. This is

especially important for humid environments.

• This water feature is designed for indoor and outdoor use.

More information about water features can be found at

youtube.com/kenroyhomefountains.

51055ORB ASSEMBLY INSTRUCTIONS

WATER FEATURE WARNINGS &

TROUBLESHOOTING

• Distilled water is recommended to reduce mineral

deposits, bacteria build up and algae that may damage

the water feature basin and pump.

If abnormal noise is heard during operation (with water):

• Disconnect the power supply and then remove the pump front

cover and impeller cover.

• Use hand to grip the impeller, gently pull the impeller/rotor

assembly out of the pump housing.

• Rinse the impeller/rotor assembly and the cavity with clean water.

If breakage or surface damage is found in the assembly contact

Customer Service for a part replacement.

PUMP SAFETY & TROUBLESHOOTING cont.

What should I consider when selecting a water feature?

In addition to your personal style tastes, be sure you have an area for your

water feature that can be safely exposed to water, as splashing can occur.

Also take into consideration what a water feature can add to your

environment: the sound of owing water or decorative lights.

Can my water feature be left outside over winter?

This water feature is rated for outdoor use; however certain weather

conditions may adversely aect your water feature. If the temperature in

your region is at risk of dropping below 33° F, your water feature should

be “winterized” before the cold weather arrives. To winterize:

1. Fully drain your water feature of all water.

2. Disconnect the hoses, pumps, and lights.

3. Clean all components thoroughly, paying special attention to the

pump to prevent residue build-up.

4. Allow all parts to dry.

5. Store parts and water feature in a safe, weather-free environment.

What kind of water should I use in my water feature?

The best water for your water feature is distilled water. This can help

prevent and reduce bacteria and algae buildup. If you do not use distilled

water, more maintenance will be necessary to keep the water feature clean.

How do I clean my water feature?

Oils, dirts, and algae can all build up on the water feature over time. The

best way to restore your water feature to its original state is to empty all

the water from the water feature and use a mild soap (like dish detergent)

and an acrylic brush to clean all the parts.

FREQUENTLY ASKED QUESTIONS

51055ORB ASSEMBLY INSTRUCTIONS

How much water do I need to keep in the water feature?

Where possible in our water features, we have included ll lines to help

you visualize the water level required for proper function. If your water

feature does not include ll lines, please check the instruction manual for

water capacity. The most important aspect to keeping your water feature

functioning is to insure the pump is submerged in water at all times to

prevent damage to the pump.

How often will I need to ll my water feature?

Over time, the water level in your water feature will recede. This is due to

evaporation, and the speed at which your water feature will need to be

lled depends greatly on your environment- the humidity, if your water

feature is in the sun, how often you run the water feature, etc. We

recommend checking the water level before running the water feature to

insure the pump is submerged in water.

I cannot nd my installation instructions. Where can I nd another

copy? Installation and assembly instructions can be found online at

www.kenroyhome.com

Can lights be turned o separately from the water feature?

Water features that include lights will have a separate plug and switch for

the lights. They do not have to be plugged in or turned on to run the

water feature.

My pump is making a loud noise. How do I x that?

1. Be sure the pump is fully submerged in water. If it is not, and pulling

in air, it will make unwanted noise.

2. Check to make sure the pump is not touching the water feature

anywhere other than the bottom. If it is up against the side wall or

another part, the vibration from the pump can cause unwanted noise.

If moving the pump away from other parts does not work, try placing a

sponge or other soft material between these areas to pad the pump.

FREQUENTLY ASKED QUESTIONS CONTINUED

51055ORB ASSEMBLY INSTRUCTIONS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kenroy Home Freiluftbrunnen Handbücher

Kenroy Home

Kenroy Home KNIGHT Installationsanleitung

Kenroy Home

Kenroy Home RIVIERA 51032SNDST Installationsanleitung

Kenroy Home

Kenroy Home 51057CON Installationsanleitung

Kenroy Home

Kenroy Home OSWEGO Installationsanleitung

Kenroy Home

Kenroy Home RIDGELAND 51040BL Installationsanleitung

Kenroy Home

Kenroy Home PILASTER Installationsanleitung

Kenroy Home

Kenroy Home 51050CON Installationsanleitung

Kenroy Home

Kenroy Home 50089 Installationsanleitung

Kenroy Home

Kenroy Home LINCOLN 51017WDG Installationsanleitung

Kenroy Home

Kenroy Home 50720COP Bedienungsanleitung

Kenroy Home

Kenroy Home 51009SNDST Installationsanleitung

Kenroy Home

Kenroy Home 50049BRZ Bedienungsanleitung

Kenroy Home

Kenroy Home Ibiza Installationsanleitung

Kenroy Home

Kenroy Home 51046SL Installationsanleitung

Kenroy Home

Kenroy Home Breckenridge Installationsanleitung

Kenroy Home

Kenroy Home KYOTO 51052COPBRZ Installationsanleitung

Kenroy Home

Kenroy Home 51057CONSOL Installationsanleitung

Kenroy Home

Kenroy Home 51039ZC Installationsanleitung

Kenroy Home

Kenroy Home ROYAL Installationsanleitung

Kenroy Home

Kenroy Home 51112COPBL Installationsanleitung

Kenroy Home

Kenroy Home SPILLWAY Installationsanleitung

Kenroy Home

Kenroy Home 50048BRZ Bedienungsanleitung

Kenroy Home

Kenroy Home TUCSON Installationsanleitung

Kenroy Home

Kenroy Home VINEYARD Installationsanleitung

Beliebte Freiluftbrunnen Handbücher anderer Marken

Sunnydaze Decor

Sunnydaze Decor XSS-578 Bedienungsanleitung

Campania International

Campania International Bibendum FT-400 Bedienungsanleitung

Elkay

Elkay FLEXI-GUARD EFHA8 1M Series Installationshandbuch

S.R.Smith

S.R.Smith Color Light Stream 2CLSLBK Bedienungsanleitung

Hozelock Cyprio

Hozelock Cyprio Cascade 1500 Bedienungsanleitung

Campania International

Campania International Juliet Fountain Bedienungsanleitung

YARDART

YARDART FT-155 Bedienungsanleitung

Alpine

Alpine WIN732 Bedienungsanleitung

Campania

Campania Valencia Bedienungsanleitung

Campania International

Campania International FT-320 Bedienungsanleitung

GardenWize

GardenWize SWGSL230 Bedienungsanleitung

Kelkay

Kelkay Easy Fountain Rustic Windmill Bedienungsanleitung

Alpine

Alpine WIN258 Bedienungsanleitung

Bond

Bond Signature Series Bedienungsanleitung

EasyPro

EasyPro Tranquil Décor HBB39 Bedienungsanleitung

Angelo Decor

Angelo Decor Castillo Bedienungsanleitung

Campania International

Campania International Girona FT-102A Bedienungsanleitung

Campania International

Campania International FT-271 Bedienungsanleitung