Kenwood KW 85 Bedienungsanleitung

KW 85

• Use and maintenance manual . . . .pag. 4

• Mode d’emploi et d’entretien . . . . .pag. 15

• Instrucciones de uso . . . . . . . . . .pag. 28

• Manual de instruções . . . . . . . . . .pag. 41

• Istruzioni per l’uso . . . . . . . . . . . .pag. 54

Sylvane LLC 800-934-9194

Sales Inquiries: 800-934-9194

Important safeguards

•Use this appliance only as described in this instruction manual.

As with any electrical appliance, the instructions aim to cover as many eventualities as possi-

ble. Caution and common sense should be used when operating and installing this air condi-

tioner.

•This appliance has been manufactured to cool and dehumidify domestic environments and

should not be used for other purposes.

•It is dangerous to alter or modify the unit's characteristics in any way.

•The appliance must be installed in line with the relevant national legislation.

•Should repairs be necessary, contact the nearest authorized De’Longhi Repair Service Center.

Unauthorized De’longhi servicing can be dangerous.

•This appliance is to be used by adults only; keep away from children.

•In the case that the power cord becomes damaged, this must be replaced only by specialized per-

sonnel authorized by the manufacturer.

•Always ensure the appliance is grounded. If you have any doubts check with a qualified elec-

trician.

•Avoid using extension cords with the unit.

•Before cleaning or maintenance operations, always unplug the unit from the outlet.

•Do not pull on or place strain on the power cord when moving the appliance.

•The appliance should not be installed where the atmosphere may contain combustible gases,

oil or sulphur, or near heat sources.

•Do not rest hot or heavy objects on the appliance.

•Clean the filters at least once a week.

•Avoid using heaters near the unit.

•The unit should be transported in a vertical position. If this is not possible secure the unit at

an angle, do not lie it horizontally.

•Before transporting the unit, drain the condensation collecting-tray and tank. After transporta-

tion, wait at least 1 hour before switching on the unit.

•The packaging materials can be recycled. You are therefore recommended to place them in

the special containers for differentiated waste collection.

SAVE THESE INSTRUCTIONS

GB/KW85 18-11-2003 14:02 Pagina 2

Introduction

The portable air conditioner is a compact unit for regulating air temperature and humidity. Its extremely

flexible characteristics make it easy to use at any time and in any room. It can be operated in multiple

modes including cooling, dehumidifying and ventilating. The appliance has been designed for dome-

stic use and may be used in the home, office, etc.

It must be connected to an outlet with an impedance of less than 0.197 Ohms.

If necessary, consult your electricity supply company for information on impedance values.

TIPS FOR ENERGY SAVING

•Keep blinds and/or curtains and windows closed during the sunniest hours of the day (cooling func-

tion).

•Keep the filter clean. In normal conditions, the filter should be cleaned about every 2 weeks. The fil-

ter eliminates part of the pollutant particles or dust transported in the air. Air quality thus depends on

the frequency with which the filter is cleaned.

GB/KW85 18-11-2003 14:02 Pagina 3

Description

Control panel

Handle

Air flow direction

fins (right hand – left hand)

Air outlet

Air flow direction fins

(high – low)

Water tank

Castors

Hot air outlet

Bottom air intake grill

Top air intake

grille for cooling,

dehumidifying

and ventilating.

DESCRIPTION OF PARTS

Front

Back

Connector for supplementary water tank

GB/KW85 18-11-2003 14:02 Pagina 4

Control panel

All functions of the unit can be controlled from the control panel or the remote control unit (certain models only).

TIMER ON/OFF

button

Press this button to

activate the timer

function (turns the

appliance off if

already on and vice

versa).

SET TEMP buttons

These buttons can

be used to set the

required room tem-

perature in a range

between 17°C

(62°F) and 31°C

(87°F). The tempera-

ture set is increased

or reduced by 1°C

(33°F).

TIMER HOUR button

Press this button to

set the length of

time before the

appliance goes off

(with the

unit on) or comes

on (with the

unit off).

SWING button

Press this button to

distribute the air flow

evenly throughout

the room (swing) or

in a specific direc-

tion (fixed position).

FAN SPEED button

Press this button to

set the speed of the

air flow emitted:

Max (HIGH), Med

(MED), Min (LOW).

MODE KEY

Press this button to

select the various

operating modes:

air conditioning

(COOL), dehumi-

difying (DRY) or ven-

tilating (FAN).

ON/OFF button

Press this button to

turn the air conditio-

ning unit on or off.

Standby button

When the indica-

tor light is on, the

appliance is plug-

ged into the outlet.

Tank full

When on, indica-

tes that the tank

needs emptying

displays the opera-

ting mode

COOL/ DRY/ FAN

Air conditioning

Dehumidifying

Ventilating

displays the position

of the air distribution

fins

Indicates that the

keypad is locked

Infrared receiver

(only on some

models)

GB/KW85 18-11-2003 14:02 Pagina 5

°F

ON/OFF button

Press this button to turn the

air conditioning unit on or

off.

MODE key

Press this button to select

the various operating

modes: air conditioning

(COOL), dehumidifying

(DRY) or ventilating (FAN).

SWING button

Press this button to distribute

the air flow evenly throu-

ghout the room (swing) or

in a specific direction (fixed

position).

Button

Press this button to lock or

unlock the keypad on the

control panel.

SET TEMP buttons

Use these buttons to set

the required room tempe-

rature between 17°C

(62°F) and 31°C (87° F).

The temperature set is

increased or reduced by

1°C (33° F).

FAN SPEED button

Press this button to set the

speed of the air flow: Max,

Med, Min.

Button

Press this button to activate

the timer function (turns the

appliance off if already on

and vice versa).

HOUR and MIN buttons

Press these buttons to set

the hour and minutes on the

remote control unit or, using

the HOUR button only, to set

the time the air conditioning

unit will come on and go off

using the TIMER function.

Description

Display

GB/KW85 18-11-2003 14:02 Pagina 6

OPERATING RANGE

The operating range of the air conditioning

unit goes from a minimum of +17°C (62°F) to a

maximum of +35°C (95°F), with a choice of

temperatures in cooling mode of from +17°C

(62°F) to + 31°C (87°F).

In dehumidifying mode, the operating range

goes from +20°C (68°F) to + 31°C (87°F). The

temperature cannot be selected in advance.

POWER SUPPLY

•Plug the air conditioning unit into a suita-

ble outlet. Do not connect to multiple

sockets.

•Once plugged into the outlet, wait about

two seconds until you hear a beep, then

press the " " button to turn the applian-

ce on.

OPERATING IN AIR CONDITIONING MODE

1. Make sure the condensation tank is cor-

rectly in place.

2. Press the "MODE" button repeatedly until

the air conditioning mode is selected.

"COOL" appears on the display.

While the unit is operating in air conditio-

ning mode, always place the exhaust

hose through an open window to eject

the hot air from the room.

3. Press the “SET TEMP” button to set a suita-

ble room temperature between +17°C

(62°F) and +31°C (87°F).

4. Press the “FAN SPEED“ button to select a

suitable fan speed: Max, Med, Min.

OPERATING IN DEHUMIDIFYING MODE

1. Keep the windows and door closed to

make dehumidification of the room more

efficient.

2. Make sure the condensation tank is cor-

rectly in place.

3. Repeatedly press the "MODE" button to

select the dehumidifying mode. "DRY"

appears on the display.

4. Neither the fan speed nor temperature

can be regulated.

5. Do not use the exhaust hose to expel the

air outside. The hot air given out at the

back of the appliance should not be

expelled from the room.

Operation

SETTING THE REMOTE CONTROL CLOCK

Remove the cover of the battery compartment on the back of the remote control unit.

After inserting two 1.5 V alkaline batteries in the compartment, the clock is automatically set at 12:00. If you want to

set the time to 10:30, proceed as follows:

Press the CLK button (in the battery compart-

ment) with a pointed object such as a pencil.

The time indicator on the display flashes and the

correct time can be set.

Press the HOUR button on the remote control unit

to set the hours (set to 10 am).

Press the MIN button on the remote control unit

to set the minutes (set to 30).

Press the CLK button again to confirm the opera-

tion, then replace the battery compartment

cover.

CLK ACL

Note: the RST button (reset) in the battery compartment cancels all the settings on the remote control unit (once pres-

sed, the current time must be re-set).

Important: make sure you do not reverse the poles of the batteries.

GB/KW85 18-11-2003 14:02 Pagina 7

TIMER FUNCTION

When the air conditioning unit is off (but plug-

ged into the outlet), to turn it on at the required

time press the "TIMER ON/OFF" button (" "

will appear on the display), then press the

"TIMER HOUR" button until the number of hours

to elapse before the appliance comes on

appears on the display. Vice versa, when the

air conditioning unit is on, to turn it off at the

required time press the "TIMER ON/OFF" button

(" " will appear on the display), then press

the "TIMER HOUR" button until the number of

hours to elapse before the appliance goes off

appears on the display. The timer can be set

from one to 12 hours.

AUTOMATIC SWING FUNCTION

Press the “SWING“ button once. The fins will

swing, distributing the air flow in the room.

Press the button again, the flow will be steady

in one direction.

CHILD SAFETY

Pressing the "+" and "-" buttons on the control

panel together for more than two seconds

locks the keypad.

The " “ symbol appears on the LCD display.

The same keypad lock function can be acti-

vated on the remote control unit by pressing

the “ “ button.

To unlock, repeat the operation.

BEFORE USING THE APPLIANCE

1. If the appliance has been in a horizontal

position during storage or transport, you

are recommended to wait at least three

hours before turning it on.

2. Always position the air conditioning unit on

a stable surface.

3. Attach the air exhaust hose to the air con-

ditioning unit.

4. Plug the air conditioning unit into a suitably

rated outlet.

5. Set the various functions of the air condi-

tioning unit according to your require-

ments.

6. The cooling system will shut down when

room temperature drops below the set

temperature. The fan will, however, conti-

nue to operate at the set speed.

If the room temperature rises above the

temperature set, the cooling system

comes on again automatically.

Operation

GB/KW85 18-11-2003 14:02 Pagina 8

CHOOSING THE INSTALLATION SITE

Position the air conditioning unit on a flat sur-

face where the air outlet grilles cannot be

obstructed. Position the appliance at least 50

cm (19.7”) away from walls or obstacles.

CABLE WINDER

Before installing the air exhaust hose, mount

the two cable winder brackets using the

screws supplied as shown in the figure.

AIR EXHAUST ACCESSORIES

INSTALLING THE AIR EXHAUST HOSE

1. Open out the end of the hose and screw the

two adapters on counterclockwise (see figu-

re).

2. Fit the square adapter on the air exhaust hose

to the air exhaust outlet on the appliance.

3. Connect the other end (flange) to the neare-

st window.

Important: the air exhaust hose must be

between 500 mm (19.7”) and 2000 mm

(78.7”) long. You are recommended to keep

the air exhaust hose as short as possible.

During installation, keep the hose as horizontal

as possible without distorting it. Do not con-

nect the terminal to other exhaust ducts (flue

or chimney) as this could lead to malfunction.

Correct wall installation: the hole must be

at a height of between 40 cm (15.7”) and

130 cm (51.18”) from the floor.

Installation

(51.18 in)

130 cm

40 cm

(15.7 in)

hose length

500 mm (19.7”) -

2000 mm (78.7”)

flange

crosspiece 675 mm

(26.5”) - 1230 mm

(48.4”) (some models

only)

adapter

square adapter

air exhaust

outlet

Flange

adapter

for flange

GB/KW85 18-11-2003 14:02 Pagina 9

If the flange hose must be curved to expel the

air, you should follow the measurements given

in the figure:

MOUNTING THE ADJUSTABLE WINDOW CLOSU-

RE CROSSPIECE (only on some models)

The appliance is provided with an adjustable

bracket.

If you have a sliding window, position the cros-

spiece in the window frame, extend it comple-

tely then close the window onto the crosspie-

ce. Fit the window flange onto the end of the

air exhaust hose, position it on the hole in the

crosspiece, then fit the other end of the hose

onto the back of the air conditioning unit.

This considerably reduces heat dispersion due

to contact between the room and the outside

environment.

The crosspiece is 40 mm (1.5”) wide and

between 675 mm (26.7”) and 1230 mm (48.4”)

long.

Installation

(19.7 in)

50 cm

60 cm

(19.7 in)

(23.6 in)

Incorrect installation diagram (the bend in

the hose is excessive and could easily lead to

malfunction)

GB/KW85 18-11-2003 14:02 Pagina 10

Andere Handbücher für KW 85

Inhaltsverzeichnis

Andere Kenwood Klimaanlage Handbücher

Kenwood

Kenwood KW 85 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung