Kenwood PKT-23K Installationshandbuch

Kenwood U.S.A. Communications Sector

PKT-23

UHF Ultra Small Compact Portable Radio

EASY PROGRAMMING INSTRUCTIONS

American Communication Systems

Discover the Power of Com munications

™

TO ORDER –VISIT

http://www.ameradio.com

■PKT-23 Portable

Ultra Small Compact Radio

1.5W / 0.5W Transmit Power

4 channels

99 Pre-Programmed UHF Frequencies

QT (39) and DQT (168) Coded Squelch

2 Programmable Function Keys

Channel Scan

Super Lock (Manager Key Lock)

Voice Guided Self-Programming Mode

Bell Tone Alert

VOX Ready

Wireless Clone

Built-in 1,430mAh Li-ion Battery

3-Hour Fast Charger (KSC-44)

Spring Action Belt Clip (KBH-20)

1.5W - 99 UHF BRS Frequencies Preprogrammed

2-year Warranty

■Key Features

■PKT-23 offers 1.5 watts of power, providing a

coverage area up to 5 miles for direct radio-to-radio

communication.

■The built-in 1,430mAh Li-ion battery provides up

to 15 hours of use w/o an accessory and 17 hours

of use with an audio accessory.

■KSC-44K charges the battery full in 3 hours, but

the micro USB port also provides a conventional

way of charging utilizing your smart phone charger.

Powerful Operation

Talk Range

Open area

w/o obstructions Up to 5.0miles

(8 km)

Residential areas

(near building) Up to 1.5miles

(2.4 km)

In steel and/or concrete

reinforced building Up to 225,000sq.ft

(20,900sq.m)

In high-rise buildings Up to 17 floors

Battery Life (5-5-90 duty cycle)

Without

Audio Accessory Saver off: 11 hours

Saver on: 15 hours

With

Audio Accessory Saver off: 12 hours

Saver on: 17 hours

Charging Time

With KSC-44 3.0 hours

With micro USB 3.6 hours

Note: Talk range will vary based on terrain and conditions Audio Accessory provides not only secure

communications but also longer operation time. Utilize the Micro USB cable to charge the radio

at office, home or even while you are in a car driving

Efficient

Secure

Charging

on-the-go

■Basic Operation

❶Power Switch

Hold for 2 seconds to turn the radio power ON and OFF.

Momentarily press while the radio is ON to see the Battery Level

Guide.

❷PTT Switch

Press and hold, then speak into the microphone to transmit.

❸UP/DOWN Keys

Press these keys to adjust the volume, change the channel, and

select options form the list in the self-programming mode.

❹Programmable Function Key #1

Press this key to activate/deactivate channel scan. Hold for 2

seconds to activate Super Lock-P function. Other functions can be

assigned from the function list. [refer to PF Key Assignment]

❺Programmable Function Key #2

Hold this key for 2 seconds to stop / start monitoring QT/DQT.

Another function can be assigned from the function list. [refer to PF

Key Assignment]

❻LED Indicator

Indicate various status/functions of the radio.

[RED] Transmitting, [GREEN] Receiving a call,

[Blinking BLUE] Standby, [Blinking RED] Low Battery

❼Voice Guide & Beep Tone

Notify various status/functions of the radio.

BASIC

Power Switch

PTT Switch

Function 1 Key Function 2 Key

UP/Down Keys

LED Indicator

Voice Guide

& Beep Tone

■Basic Operation

BASIC

Operations (Volume Range 0 ~ 7)

1. Press Up key for volume Up.

2. Press Down key for volume Down.

Indications

1. Beeps according to volume level.

2. Max./Min. tone beeps at the limit.

Operations

1. Press PF2 Key.

2. Up/Down to scroll the channels.

3. Wait for 2 sec. until beep tones sound.

(the channel is set when the beep tones

sound)

Indications

1. Channel Number is announced.

2. Yellow LED blinks a number of times for

the current channel #.

BASIC

Operations

1. Press PWR key.

Indications

1. Light blue LED flashes the number of

times for battery levels:

LED Indicator Battery Level

Blinks 3 Times High

Blinks 2 Times Medium

Blinks 1 Times Low

■Basic Operation

BASIC

Operation (ON)

1. Press PF1 key to enable SCAN.

Indications

1. Single beep sounds.

2. Green LED blinks while SCAN is ON.

Operation (OFF)

1. Press PF1 key to disable SCAN.

Indications

1. Double beeps sound.

2. Green LED stops blinking.

Operations (Activate)

1. Hold PF1 Key for 4 sec. to activate Super

Lock-P

Indications

1. Single beep sounds.

Operations (Deactivate)

1. Turn the radio OFF, hold the PF2 key and

turn the radio ON. Once Yellow LED

lights, release the PF2 key.

The ONLY operations allowed in Super Lock-P mode

are PTT, Squelch Off, Monitor, Volume Up/Down, and

Power On/Off.

BASIC

Operations (ON)

1. Hold PF2 key for 1 sec. to turn on Monitor.

Indications

1. Single beep sounds

Operations (OFF)

1. Hold PF2 key for 1 sec. to turn off Monitor.

Indications

1. Double beeps sound

■Self Programming Mode

SELF PROGRAMMING

Mode Entry

1. Hold PWR + PF2 + UP to enter the mode.

Indications

1. Yellow LED lights.

2. Announces “Setup”

Operations

1. Use the [Up]/ [Down] keys to select the key

assignment from the table.

2. Press [PF1] to confirm the function chosen

to be assigned to [PF1] Press

2. Hold [PF1] for 2 sec to confirm the function

chosen to be assigned to [PF1] Hold.

2. Hold [PF2] for 2 sec to confirm the function

chosen to be assigned to [PF2] Hold.

3. Hold the [PTT] for 3 sec. Radio will store

the current configuration and confirmation

tone sounds and radio is reset and back to

normal operation.

4. To exit without save, hold [PWR] key.

Power off tone sounds and radio is off

without key function changes.

Table # Functions [PF1] Press [PF1] Hold [PF2] Hold

0 None ○○○

1 Low Transmit Power ○○○

2 Monitor ○○○

3 RX/TX Frequency Scan ○○○

4Scan ○○○

5 Squelch Off ○○○

6 Super Lock-C N/A ○○

7 Super Lock-P N/A ○○

8 Tone Alert ○○○

Self Programming Timer is 20 seconds

First, turn Off the radio,

then operate keys to enter each mode.

■Self Programming Mode

SELF PROGRAMMING

Mode Entry

1. Hold PWR + PTT + UP to enter the mode.

Indications

1. Yellow LED lights.

2. Announces “Self” + “Channel One”

Operations

1. Use the [Up], [Down] keys to select the

channel.

2. Confirm the channel by press [PTT]. Radio will

go to frequency setup after channel

confirmation mode.

3. Use the [Up], [Down] keys to select frequency

from the frequency table and table number will

be announced.

4. Press [PTT] to confirm the selected frequency,

radio will go on to QT/DQT setup mode. "QT"

will be announced in the QT/DQT setup mode.

5. Use the [Up], [Down] keys to select QT or

DQT setup mode. "QT" or "DQT" will be

announced when selected. Press [PTT] to

confirm the setup mode.

6. In the QT/DQT setup mode, select QT/DQT

from the QT/DQT table, and table number will

be announced.

7. Press [PTT] to confirm the table number.

Radio will go back to Channel select mode.

8. Repeat the step 1 to 7 to setup another

channel’s frequency & QT/DQT.

9. To save & exit, hold [PF2] + [PTT] for 3 sec., a

confirmation tone sounds and radio is reset

and back to normal operation mode.

10. To exit without save, press & hold [PWR].

Power off tone sounds and radio is off.

Self Programming Timer is 20 seconds

First, turn Off the radio,

then operate keys to enter each mode.

Frequency

Table Down

Frequency

Table Up

Channel

Down

Frequency

Setup mode

PTT

Down

PTT

QT/DQT

Setup mode

DQT Mode

QT Mode

Down

PTT

QT/DQT

Setup mode PTT

QT/DQT

Table Up

QT/DQT

Table Down

Down

■Self Programming Mode

SELF PROGRAMMING

Mode Entry

1. Hold PWR + UP to enter the mode.

Indications

1. Yellow LED lights.

2. Announces “VOX”

Operations

1. Use [PF1] key to increase the vox gain level

and voice will announce the level (Total 5

level).

2. Use the [Up] & [Down] to select the channel to

configure the VOX per channel status

3. In the selected channel, press [PF2] to control

VOX ON/OFF of the channel.

4. To exit and save, hold [PTT] for 3 sec.,

confirmation tone sounds and radio is reset

and back to normal operation.

5. To exit without save, press & hold [PWR].

Power off tone sounds and radio is off.

Self Programming Timer is 20 seconds

First, turn Off the radio,

then operate keys to enter each mode.

Select Channel [Up]

Select Channel [Down]

[PF1]

Increase VOX level

[PF2]

VOX ON/OFF per Channel

■Self Programming Mode

SELF PROGRAMMING

Mode Entry

1. Hold PWR + PF2 + DOWN to enter the mode.

Indications

1. Yellow LED lights.

2. Announces “CLONE”

Operations

1. Use the [Up], [Down] keys to select clone

frequency from the Frequency Table. Table #

will be announced. (BRS Table: 99)

2. Set all the cloning radios (Master & Slaves) at

the same Frequency Table.

3. Press [PTT] of the Master Radio to start clone.

4. If clone is successful, the Slave radios will

beep once and go back to normal operation

mode.

5. If clone is unsuccessful, the Slave radios will

beep 3 times as an error indicator and stay in

clone mode.

6. The Master radio will beep once after cloning

(transmission) is completed and stay in clone

mode. To exit, hold [PWR]. Power off tone

sounds and radio is off.

*During cloning, the Master’s red LED is on during

transmission; the Slaves’ green LED are on when

start receiving the data.

Self Programming Timer is 20 seconds

First, turn Off the radio,

then operate keys to enter each mode.

Master Radio Slave Radio

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kenwood Tragbares Radio Handbücher

Kenwood

Kenwood TK-2200L Bedienungsanleitung

Kenwood

Kenwood TK-5210 Bedienungsanleitung

Kenwood

Kenwood KTC-H2A1 - Here2Anywhere Sirius Radio Bedienungsanleitung

Kenwood

Kenwood TK-5210 Bedienungsanleitung

Kenwood

Kenwood TK-2180 Bedienungsanleitung

Kenwood

Kenwood ProTalk TK-2200LP VHF Bedienungsanleitung

Kenwood

Kenwood FleetSync 80 Series Benutzerhandbuch

Kenwood

Kenwood TH-F7A Bedienungsanleitung

Kenwood

Kenwood NX-5000 series Bedienungsanleitung

Kenwood

Kenwood TK-2302VK Bedienungsanleitung

Kenwood

Kenwood TH-K40A Bedienungsanleitung

Kenwood

Kenwood TK-2170/3170 Bedienungsanleitung

Kenwood

Kenwood TK-2180 Bedienungsanleitung

Kenwood

Kenwood TK-7160H Bedienungsanleitung

Kenwood

Kenwood TK-2140 Bedienungsanleitung

Kenwood

Kenwood TK-2212LK Bedienungsanleitung

Kenwood

Kenwood PKT-23 Bedienungsanleitung

Kenwood

Kenwood TK-2140/3140 Bedienungsanleitung

Kenwood

Kenwood NEXEDGE NX-200 Bedienungsanleitung

Kenwood

Kenwood NEXEDGE NX-220 Bedienungsanleitung

Kenwood

Kenwood TK-480 Bedienungsanleitung

Kenwood

Kenwood TK-2200 Bedienungsanleitung

Kenwood

Kenwood TK-2170 SERIES Bedienungsanleitung

Kenwood

Kenwood TH-D7A Bedienungsanleitung

Beliebte Tragbares Radio Handbücher anderer Marken

Telefunken

Telefunken P5 Bedienungsanleitung

Tait

Tait TP9300 Bedienungsanleitung

Lafayette

Lafayette Guardian 5500 Bedienungsanleitung

Sailor

Sailor SP3300 Bedienungsanleitung

Matra Nortel

Matra Nortel MC 6500 Bedienungsanleitung

Hytera

Hytera PD362i Bedienungsanleitung

Vertex Standard

Vertex Standard VX-P920 Series Bedienungsanleitung

Roberts

Roberts Ecologic 3 Bedienungsanleitung

LENCO

LENCO IPD-5100 Bedienungsanleitung

Baofeng

Baofeng BF-82 Bedienungsanleitung

Trevi

Trevi RA 764 Bedienungsanleitung

M/A-Com

M/A-Com P5100 Series Bedienungsanleitung

Elta

Elta 6699 Bedienungsanleitung

PURE

PURE ONE classic Series II Bedienungsanleitung

Teac

Teac PR130 Bedienungsanleitung

Philips

Philips AE6370 Bedienungsanleitung

Simoco

Simoco SRP9170 Bedienungsanleitung

Audiovox

Audiovox FR14 Bedienungsanleitung