Kenwood KDS-P900 Bedienungsanleitung

©B64-1779-00 (W)

KDS-P900

INSTRUCTION MANUAL

PROCESSEUR SURROUND DVD à 5.1 canaux

MODE D’EMPLOI

5.1ch DVD SURROUND PROCESSOR

5.1 Kan. DVD-SURROUND-PROZESSOR

BEDIENUNGSANLEITUNG

5.1 kan DVD-SURROUNDPROCESSOR

GEBRUIKSAANWIJZING

5.1 canale DVD SURROUND PROCESSOR

ISTRUZIONI PER L’USO

PROCESADOR SURROUND DVD de 5.1 canales

MANUAL DE INSTRUCCIONES

5.1 聲道 DVD 環繞音效處理器

使用說明書

使用说明书使用说明书

使用说明书

5.1 声道 DVD 环绕音效处理器

2-English

Installation

Connecting Cables to Terminals

TO NAV.I/F TO ANTENNA TO 5L I/F TO MZ-BUSTO MONITOR

TO MZ-BUS

"1"}

1-CH-2



M 4

DVD player unit

Connection cable (5.5m:Accessory q)

Optical cable (5.5m:Accessory r)

Receiver unit (front side)

MZ-BUS Disc Changer

C929

Put the protection caps removed

from the unit into the unused

terminals in the KDS-P900.

NOTE

Protection cap

DVD player unit & Receiver unit:

KVT-910DVD/920DVD/930DVD/940DVD/960DVD

Connection cable (Provided with the disc changer)

When connecting the C929 optical cable, be

sure to set the selector switch to 1.

2CAUTION

KDS-P900 02.12.16 9:30 AM Page 2

English-3

FM /AM

ANTENNA AV INPUT

AV INPUT

L R

VIDEO

VIDEO FRONT REAR

PREOUT

NON-FAD

AV OUTPUT POWER

TO MONITOR UNIT

L R

VIDEO

L L L

RRR

DIGITAL IN

CD-CH 1

DIGITAL IN

TV/DVD

REAR

AUDIO IN

FRONT

CENTER

SUBW

REAR

AUDIO IN

FRONT

CENTER

SUBW

30R

Subwoofer preout

Center Speaker preout

Front left output (white)

Front right output (red)

Rear left output (white)

Rear right output (red)

Left input (white)

Right input (red)

KDS-P900

(rear side)

(front side)

Receiver unit (rear side)

When handling an optical cable for wiring, use

care not to exceed the minimum cable bend

radius of 30 mm.

If you exceed the minimum bend limit, optical

fibers within the optical cable may be damaged.

When installing the DVD player unit on the

vehicle, ensure that the optical cable is not

stuck between the DVD player unit and vehicle

parts.

2CAUTION

Optical cable (Provided with the C929)

Audio cable

(Commercially available part)

KDS-P900 02.12.16 9:30 AM Page 3

4-English

Securing to audio board

■

Remove the caution sticker and fasten the

installation brackets on the both sides of the

KDS-P900 using the sems screws (M4 x 8

mm).

;;;;;;

Peel the protective strips off of the velcro strips,

attach them to the bottom of the hideaway unit,

and secure to the pile carpet.

Please do not install the unit near the

dashboard, the rear tray, or other important

components. Doing so could lead to injury or

accident should the unit come off due to a

shock and strike a person or an important

component.

Tapping screws should be used for mounting.

(Attachment with velcro strips, although easy,

can come off with a shock.)

2CAUTION

Sems bolts

(M4X8mm)

(Accessorye)

Tapping screw

(ø4X16mm)

(Accessoryt)

Installation

brackets

(Accessoryw)

Installation

Use the tapping screw (ø4X16mm) to secure

the hideaway unit to the audio board.

Securing to pile carpet

■

;;;;

Velcro strips

(Accessoryy)

Caution sticker

Use the supplied screws for installing the

KDS-P900. Using any other screw may

cause the equipment to improperly

function.

2CAUTION

KDS-P900 02.12.16 9:30 AM Page 4

English-5

The use of any accessories except for those provided might result in damage to the unit. Make sure

only to use the accessories shipped with the unit, as shown above.

2CAUTION

Accessories

.........1

.........2

.........4

External view

......... Number of items

.........1

External view

......... Number of items

.........4

.........2

Specification

DSP section

D/A Converter ...............................................................................................................................................24 Bit

A/D Converter ...............................................................................................................................................24 Bit

Decorder ....................................................................................Linear PCM / Dolby prologic / Dolby digital / DTS

Equalizer

4BAND Parametric equalizer BAND1 frequency : ...........................................60/80/100/120/160/200/250 Hz

BAND2 frequency :................................................315/400/500/630/800/1K Hz

BAND3 frequency :.........................................1.25K/1.6K/2K/2.5K/3.15K/4K Hz

BAND4 frequency :.............................................5K/6.3K/8K/10K/12.5K/16K Hz

Gain ...........................................................................................................................................................±9 dB

Q control .......................................................................................................................................0.25/0.5/1.0/2.0

Crossover

Highpassfilter frequency :.....................................................................THR/30/60/90/120/150/180/250 Hz

Slope :....................................................................................................................12/18/24 dB

Lowpassfilter frequency :.............................................................................30/60/90/120/150/180/250 Hz

Slope :....................................................................................................................12/18/24 dB

Time alignment

(0.15mSTEP).................................................................................................................................0 – 3.0 m

(0.5ft STEP) .................................................................................................................................0 – 10.0 ft

(0.3mSTEP)................................................................................................................................3.0 – 6.0 m

(1.0ft STEP) ............................................................................................................................10.0 – 20.0 ft

Channel level ..............................................................................................................................................±10 dB

Audio section

Preout level (V) ..................................................................................................................................4.5 V / 10 kΩ

Preout impedance(Ω).................................................................................................................................≤600 Ω

External audio max input level..............................................................................................................1 V / 22 kΩ

S/N Ratio (dB)..............................................................................................................................................100 dB

Harmonic Distortion

(20 kHz LPF , 1kHz)..........................................................................................................................0.01 %

Frequency Response ......................................................................................................................10 Hz – 24 kHz

General

Installation Size (W x H x D) ....................................................................................................208 x 40 x 163 mm

(8-3/16 x 1-9/16 x 6-7/16 in.)

Weight ............................................................................................................................................2.0 lbs (0.9 kg)

Specifications subject to change without notice.

KDS-P900 02.12.16 9:30 AM Page 5

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kenwood Prozessor Handbücher