Kessil AP9X Bedienungsanleitung
USER MANUAL
200327A1
TABLE OF CONTENT
01 INSIDE THE BOX, PARTS DIAGRAM
02 INSTALLATION & CONNECTION
03 TOUCH PANEL
04 WI-FI INDICATOR STATES
05 MODE INDICATOR STATES
06 MOUNTING, CONTROLLING MULTIPLE K-LINK & 0-10V
FIXTURES, WARNING
07 CONTROLLED BY SPECTRAL CONTROLLER X ,
TROUBLESHOOTING GUIDE, SPECIFICATIONS
08 DEEP CLEANING
09 SAFETY INSTRUCTIONS, INSTRUCTIONS DE SECURITE
10 MAINTENANCE, FCC STATEMENT
1
2
3
4
5
6
7
8
9
10
INSIDE THE BOX
AP9X
Power Adapter
Warranty Card
Kessil Sticker
Screw Hook &
Hanging Bracket x4
PARTS DIAGRAM
A Mode Indicator
B Wi-Fi Indicator
CTouch Panel - Touch once to activate
DPower - Turn the AP9X on or off.
EIntensity - Adjust the intensity of the light.
FColor - Adjust the color of the light.
GMode - Slave mode.
H Fan (Air Inlet)
I Screw Holes - For AP9X Mounting Arm
/ Hanging Kit / Brackets
J K-Link Ports
K0-10V Output Ports
L LED Arrays + Reflectors
MVents (Air Outlet)
N Power Cord
AC Adapter Cable
(Plug type varies from
country to country)
COLOR
1
INT
COLOR
Wi-Fi
Mode
K-Link0-10V(R) K-Link 0-10V(L)
C B ADEFGH
NL
L
K
I
M
J
QR Code Stickers
(This is for wireless
connection process, please
SAVE these stickers)
T10 M3 Torx key
(For deep cleaing)
The AP9X requires 20-30 seconds to boot.
The Wi-Fi Indicator (B) will first show solid
purple light, and then turn to solid orange
light. The Mode Indicator (A) will also show
solid blue light.
* The light will be turned on automatically.
DO NOT place the AP9X on any object.
Connect the AP9X to the Power Adapter and
plug it into a wall outlet. The Wi-Fi Indicator
(B) will be solid purple to indicate booting
mode.
INSTALLATION & CONNECTION
Power
Booting
Step 1
Power Cord
(5.9ft / 1.8m)
Power Adapter
Step 2
If you have more AP9Xs, choose "Set up
Additional AP9X". Choose "Done" if you
complete the setup.
Set up More AP9X
Step 5
Adapter Cable (5.9ft / 1.8m)
(Plug type varies from country to country)
Download the “Kessil WiFi” app* in App Store
or Google Play Store.
* Only supports iOS 10.0 or above and Android 5.0
or above
Download “Kessil WiFi” App
Step 3
Open the “Kessil WiFi” app and follow the
instructions in the app to connect to AP9X.
You will need the QR Code Sticker provided
in the package. If you wish to enter the
password manually, the password is
reverse of the S/N of the AP9X (capital
letter matters).
Connection
Step 4
This is for wireless
connection process,
please SAVE these stickers.
***
Wi-Fi Mode
INT
Wi-Fi Mode
2
Wi-Fi Mode
INT
COLOR
Wi-Fi Mode
Booting After booting
Wi-Fi Mode
Wi-Fi Mode
TOUCH PANEL
Manual Control
COLOR : 9 color modes
INTENSITY : 5 intensity levels
Touch the Power (D) symbol to turn on/off the
AP9X.
Power ON: Mode Indicator (A) is solid blue
Power OFF: Mode Indicator (A) is solid red
Turn On/Off the AP9X
1% / 25% /50% /75%/100% Touch the Intensity (E) symbol and Color (F)
symbol to adjust the intensity and color of the
AP9X. Intensity levels and color modes are in
cycles.
Reset the AP9X Wi-Fi Configuration
Factory Reset the
AP9X
Wi-Fi Mode
INT
COLOR
Wi-Fi Mode
Wi-Fi Mode
INT
COLOR
Wi-Fi Mode
Touch and hold the Intensity (E) & Mode (G)
symbols simultaneously for 3 seconds to
reset the Wi-Fi configuration (i.e. to recon-
nect). The Wi-Fi Indicator (B) will turn solid
red. User's settings will not be deleted. The
Wi-Fi Indicator (B) will change to solid
orange after booting.
Touch and hold the Intensity (E), Color (F) &
Mode (G) symbols simultaneously for more
than 5 seconds to reset the AP9X. The Wi-Fi
Indicator (B) will blink red. Replug the power
plug within 30 seconds. User's settings will
be deleted. The Wi-Fi Indicator (B) will
change to solid orange; Mode Indicator (A)
will change to solid blue after booting.
3
Touch the Touch Panel (C) once to activate
4
Booting
Wi-Fi ON
Wi-Fi OFF
Standby /
No Connection
Connected
Solid Purple
Wi-Fi_STA Mode
Solid Red
Solid Green
(To connect to a wireless router or master Kessil Wi-Fi enabled products)
No Light
Solid Orange
Standby mode, ready to be connected.
Solid Purple
The AP9X requires 20-30 seconds to boot. The AP9X Wi-Fi Indicator (B) will
show solid purple light.
Solid Red
Attempting to connect. If it stays for more than 3 minutes, reset AP9X's WiFi
configuration (Touch and hold the Intensity (E) & Mode (G) symbols simulta-
neously for 3 seconds) and add the AP9X in the app again.
Blinking Green
When updating the AP9X’s firmware through Kessil WiFi app, the Wi-Fi Indi-
cator (B) will blink green light.
Solid Green
STA mode. Successfully connected to wireless router or to a master Kessil
Wi-Fi enabled product as slave.
WI-FI INDICATOR STATES
Solid Orange
Solid Orange
NOT broadcasting Wi-Fi signal. K-Link signal as Input, able to daisy-chain
other master & slave AP9X.
Solid Red
Power is at OFF mode.
Solid Blue
Broadcasting Wi-Fi signal. K-Link signal as Output , able to daisy-chain other
slave AP9X (Unable to daisy-chain other master AP9X).
MODE INDICATOR STATES
5
Booting
Power OFF
K-Link as Output
K-Link as Input
Solid Purple
Mode
Solid Red
Solid Blue
No Light
WARNING
CONTROLLING MULTIPLE K-LINK & 0-10V FIXTURES
MOUNTING
• Hang the light with the four Screw Hooks and the four Hanging Brackets.
• To install the Hanging Brackets, remove the screws on the AP9X, use the same screws
to secure the fasteners with triangular rings (Hanging Brackets) onto the light fixture.
6
0-10V(Output only) 0-10V(Output only)K-LinkK-Link
K-Link0-10V(R) K-Link 0-10V(L)
Master: Controllable
touch panel (C)
Slave: Touch panel (C)
cannot be controlled
When multiple X-series K-Link fixtures are daisy-chained, the Touch Panel (C) of the slave
fixture(s) is deactivated. Control is only available on the master fixture.
INT
COLOR
Wi-Fi Mode
INT
COLOR
Wi-Fi Mode
• Two K-Link ports (J): Connect and control multiple X-series K-Link fixtures using "Kessil
WiFi" app and K-Link Cables. When connecting Kessil Wi-Fi enabled products, make
sure to switch them to slave mode. When controlling them manually, tuning controls on
any light control all other lights in chain.
• Two 0-10V Output ports (K): Connect and control multiple 0-10V fixtures by using
"Kessil WiFi" app.
INT
COLOR
Wi-Fi Mode
INT
COLOR
Wi-Fi Mode
Dimensions
Weight
16.46” x 5.71” x 1.42” (418mm x 145mm x 36mm)
2.05 Ibs (0.93 kg)
llluminator Power Adapter
Power Consumption 185W maximum Input 100-240V~ AC 50-60 Hz
Input Voltage 48V DC 5% Output 48V DC, maximum 4.2A
+
_
SPECIFICATIONS
Size and Weight
Operating Frequency IEEE 802.11b/g/n(2.4GHz) & IEEE 802.11a/ac(5GHz)
Network Encryption Type
Wi-Fi Module
WPA-PSK / WPA2-PSK
(Do not support WEP, WPA-Enterprise, WPA2-Enterprise, and Monitor Mode.)
CONTROLLED BY SPECTRAL CONTROLLER X
- AP9X can be connected and controlled through Kessil Spectral Controller X with a
K-Link Cable.
- Switch the AP9X to slave mode first, by touching the Mode (G) symbol for 3 seconds,
then connect to the Spectral Controller X. The AP9X will be grouped under the TB group.
INT
COLOR
Wi-Fi Mode
INT
COLOR
Wi-Fi Mode
TROUBLESHOOTING GUIDE
Problem
Make sure the fan is operating properly.
Cause / Solution
Please make sure to perform maintenance before doing any troubeshooting.
Light doesn’t turn ON
Unit is flickering
Make sure the unit is connected to the power adapter and the power adapter is plugged
into an outlet with the correct specifications.
Make sure the device is operating within the specified operating temperature range. If
unit overheats, it will automatically shut down.
Make sure the unit has not overheated by operating at a room temperature above
100°F/40°C.
Make sure the power adapter has the right specifications.
Make sure the power adapter has the right specifications.
Make sure electrical power is available to the AC outlet being used.
7
DEEP CLEANING
Use a 2.5mm Hex key (Not included) to
remove 4 (L: 12mm) M4 screws (I) on the
upper cover.
Use a T10 Torx key to remove 10 (4 x L:
12mm / 6 x L: 5mm) M3 screws on the bottom
cover.
Remove the Screws on the Bottom
Remove the Screws on the Top
Step 1
Step 2
Ensure the Touch panel cable and the Power
Cord (N) are properly placed. Flip the cover
back and screw in all the screws on the top
and bottom covers.
DO NOT over-tighten the screws to avoid
parts damage.
Reassemble
Step 5
Carefully flip the cover from the rear side.
HANDLE WITH CARE: DO NOT pull the
Touch Panel cable
Flip the Cover
Step 3
Clean and remove any dust and debris using
a CO2 dust blower (or similar dust blower) or
an alcohol wipe. Do not remove other screws
to avoid parts damage.
Cleaning
Step 4
8
Andere Handbücher für AP9X
1
Inhaltsverzeichnis
Andere Kessil Aquarium Handbücher
Beliebte Aquarium Handbücher anderer Marken
JBL
JBL PRO SILENT S-100 Bedienungsanleitung
Amtra
Amtra VEGA Bedienungsanleitung
JBL
JBL CRISTALPROFI i60 greenline Bedienungsanleitung
Aquatlantis
Aquatlantis Tecatlantis EASY LED UNIVERSAL 2.0 Bedienungsanleitung
Innovative Marine
Innovative Marine MightyJet 8500 Mini Betriebsanleitung
SuperFish
SuperFish Planty 25 Installationsanleitung
Royal Exclusiv
Royal Exclusiv Bubble King DeLuxe 300 Bedienungsanleitung
Sera
Sera Marin Precision Biotop LED Cube 130 Bedienungsanleitung
Commodity Axis
Commodity Axis ViaAqua Titanium Heater Bedienungsanleitung
Sander
Sander Ozonizer P 2000 Bedienungsanleitung
Hagen
Hagen HALF MOON Bedienungsanleitung
CPR
CPR CS150 Bedienungsanleitung