Key Safe P500 Administratorhandbuch

Code Change Guide - P500 KeySafe

Questions? Give us a call on 01905 770 333

Before you begin, please remember

You will need to select your own combination, ideally featuring

between 5 and 7 digits and use a combination of both numbers

and letters

Each number/letter can only be used once

Do not use a combination that can be easily guessed

There is no override or reset code. Make a note of your code

and store it somewhere safe

Setting your combination

Pull open the black weather cover.

Press down on the CLEAR button (located in the centre of the

P500) and then release.

Enter your existing code and then turn the OPEN dial clockwise

180° to open the lid. The word OPEN will now be upside-down.

Slide the white plastic instruction card on the lid towards the

hinge of the KeySafe and remove. This may reveal a red

warning sticker. Please read before removing.

Without closing the P500 lid, leaving the KeySafe open, turn the open dial on the front of the

P500 counter clockwise 180°, back to the locked position. The word OPEN will now be the

correct way up. Confirm that the “GREEN” triangle is visible on the locking bolt.

There are twelve grey buttons on the back of the lid. Each of these grey buttons corresponds

to the black buttons on the front of the P500. These buttons each have small arrows in the

shape of a triangle. Arrows pointing away from the hinge are OFF and are not part of the

combination. Arrows pointing towards the hinge are ON and are part of the combination.

Important!

The locking pin must be in LOCKED position before the code can be changed. Forcing the

setting buttons when in the DOWN position may damage the P500 and void the warranty.

Use the white plastic card provided (code change tool) to turn all the grey dials to the OFF

position. This will reset your combination. If you encounter resistance, stop and check to

make sure the locking bolt is LOCKED and the word OPEN is the correct way up on the

OPEN dial.

Note: Do not use a screwdriver!

Test to make sure your KeySafe code has now been reset by turning the OPEN dial

clockwise 180°. The OPEN dial should turn freely and the locking bolt should retract without

entering a code. If the OPEN dial does not turn, then there is still a grey dial set in the ON

position. Make sure all the dials are in the OFF position.

Again, without closing the P500 lid, turn the open dial on the front of the P500 counter

clockwise 180° back to the locked position. The word OPEN will now be the correct way up.

Confirm that the “GREEN” triangle is visible on the locking bolt.

To add a number or letter to the code, use the code change tool to turn the grey dial 180°

until the button pops back up completely and the arrow points in the ON direction (towards

the hinge).

Once your code is set. Return the red sticker (if there is one) and the white plastic card over

the back of the lid.

Code Change Guide - P500 KeySafe

Questions? Give us a call on 01905 770 333

Testing your combination

With the P500 still open, making sure the word OPEN is the correct way up on the OPEN

dial. If it is not, turn the OPEN dial counter-clockwise until it is the correct way up. On the

front of the P500, pressing only the buttons in your combination, press each button in until it

clicks. If you press the wrong button, push down on the clear button and enter your code

again.

Turn the OPEN dial clockwise 180° to open. If the combination is set correctly, the OPEN

handle will turn fully and the locking bolt will retract. If not, push down the CLEAR button and

check to ensure you have entered the correct code. Refer to "Setting your combination" if

you continue to experience difficulty.

Opening and closing your P500

Press down on the CLEAR button.

Enter the combination. If you enter an incorrect combination, press down on the CLEAR

button and re-enter the combination.

Turn the OPEN dial clockwise 180° to open. When you turn the handle, the combination will

clear.

Note: The open dial is designed so it cannot be forced open. If an incorrect code is entered

and the handle is forced, the handle will unlatch from the locking mechanism and turn freely

without opening. To reset the handle, turn it all the way back to the locked position (OPEN is

the correct way up) where it will snap back into place.

To relock, close the lid and turn the OPEN dial counter-clockwise 180° back to the locked

position.

Click here or scan below for our instruction video

Inhaltsverzeichnis

Andere Key Safe Sicher Handbücher

Key Safe

Key Safe Supra P500 Bedienungsanleitung

Beliebte Sicher Handbücher anderer Marken

Squire

Squire Stronghold Keysafe Bedienungsanleitung

Phoenix

Phoenix FS0352C Produktinformationsblatt

Phoenix

Phoenix KS0030E Series Bedienungsanleitung

Vaultek

Vaultek 10 Series Technisches Datenblatt

Arregui

Arregui CLASS Bedienungsanleitung

Beaumont

Beaumont SMART KEYBOX Bedienungsanleitung

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Bedienungsanleitung

Hornady

Hornady SnapSafe Trunk Safe II Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Bedienungsanleitung

Honeywell

Honeywell 5912 Bedienungsanleitung

Phoenix

Phoenix FS1280F Bedienungsanleitung

Phoenix

Phoenix SS0992K Produktinformationsblatt

Technomax

Technomax Trony Series Handbuch

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Bedienungsanleitung

RICHTER CZECH

RICHTER CZECH LA Bedienungsanleitung

Olymp

Olymp GOsafe 110 Bedienungsanleitung

Phoenix

Phoenix SS0100E Produktinformationsblatt

Clarke

Clarke Strong-Arm CS1000K Bedienungsanleitung