Keysight Technologies U1282A Kurzanleitung

ADMINISTRATIVE INFORMATION

ACTION [X] ON SPECIFIED FAILURE

CATEGORY: [[]] AGREEABLE TIME

STANDARDS

LABOR: 0.1 Hours

LOCATION [X] CUSTOMER INSTALLABLE

CATEGORY: [[]] ON-SITE (active On-site contract required)

[[]] SERVICE CENTER

[[]] CHANNEL PARTNERS

SERVICE: [[]] RETURN

INVENTORY: [[]] SCRAP

[x] SEE TEXT

USED [[]] RETURN

PARTS: [[]] SCRAP

[x] SEE TEXT

AVAILABILITY: PRODUCT’S SUPPORT LIFE

NO CHARGE AVAILABLE UNTIL: 20 April 2017

[[]] Calibration Required

[X] Calibration NOT Required

PRODUCT LINE: WC

AUTHOR: SJ

ADDITIONAL INFORMATION:

Modification Recommended Service Note

Version 1.2 | April 25, 2016| Page 1of 3

Modification Recommended

Service Note

U1282A-01

U1282A Handheld Digit Multimeter

Serial Numbers: “See Appendix (A)"

The Problem –Capacitance measurement may be out of specification at 100nF range and below.

Parts Required:

P/N Description Qty.

Pomona 2BC-36 double banana plug both ends cable assembly

Supersedes:

NONE

Modification Recommended Service Note

Version 1.2 | April 25, 2016| Page 2of 3

Situation:

U1282A within the serial number range may not meet the specification for capacitance

measurement in 100nF range and below. This is due to improper open adjustment performed at

factory which the cable has been used to perform the open adjustment, has caused a negative

offset stored in the multimeter’s memory.

Solution/Action:

To verify whether the multimeter is impacted with capacitance measurement in 100nF range and

below:

1. Turn the knob to the Capacitance measurement position.

2. Manual set the range to 10 nF range.

3. Plug in one end of the Pomono 2BC-36 cable assembly across the capacitance measurement

terminal, leave the other end of the cable assembly open.

4. The U1282A should read between 0.8nF to 1.1nF, otherwise the “Open” calibration adjustment

was performed incorrectly.

To correct the multimeter capacitance measurement in 100nF range and below:

5. Unplug any cable from the multimeter’s terminal.

6. By referring to the service guide procedure

(http://literature.cdn.keysight.com/litweb/pdf/U1281-90002.pdf ), unsecure the meter to

enter into the calibration adjustment mode.

7. Turn the knob to the Capacitance measurement position.

8. Perform ONLY the “Open” adjustment in Capacitance measurement without any cable

connected to the multimeter.

9. Exit calibration adjustment mode after the “Open” adjustment is done.

10. Verify the “Open” adjustment has been performed correctly by repeating step 1 to step 4.

Customers who have purchased the U1282A Multimeter within the serial number range stated in this

service note will receive a complementary Pomona 2BC-36 cable assembly.

Each customer is entitled to one free Pomona 2BC-36 cable assembly.

To request a free Pomona 2BC-36 cable assembly, please click HERE

(http://www.keysight.com/find/pomona2BCcablerequest) and provide the following information on the

web form:

1. Instrument Model Number

2. Serial Number

3. Name of distributor who sold this unit

4. Date of purchase

5. Delivery details:

Receiver’s Name

Receiver’s Address

Receiver’s Telephone number

Keysight will arrange for the shipment of the free Pomona 2BC-36 cable assembly to the customer.

Modification Recommended Service Note

Version 1.2 | April 25, 2016| Page 3of 3

Revision History:

Date

Service

Note

Revision

Author

Reason for Change

20 April 2016

As Published

Appendix (A):

MY55270002

MY55300109

MY55420012

MY55440005

MY55460012

MY55280010

MY55310018

MY55420017

MY55440009

MY55460013

MY55280022

MY55320002

MY55420023

MY55440011

MY55460014

MY55280039

MY55410029

MY55420028

MY55440013

MY55470019

MY55280054

MY55410034

MY55420047

MY55440015

MY55280055

MY55410037

MY55420054

MY55440019

MY55290019

MY55410054

MY55420057

MY55440025

MY55290026

MY55410056

MY55420068

MY55440027

MY55300066

MY55410078

MY55430068

MY55440030

MY55300099

MY55420003

MY55440001

MY55440032

Andere Keysight Technologies Multimeter Handbücher

Keysight Technologies

Keysight Technologies U1251B Kurzanleitung

Keysight Technologies

Keysight Technologies U1253B Bedienungsanleitung

Keysight Technologies

Keysight Technologies Truevolt Series Betriebsanleitung

Keysight Technologies

Keysight Technologies U1281A Betriebsanleitung

Keysight Technologies

Keysight Technologies 8163A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U1273A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U1273A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U1251B Bedienungsanleitung

Keysight Technologies

Keysight Technologies U1461A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U1231A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U1281A Bedienungsanleitung

Keysight Technologies

Keysight Technologies 34450A Fehlerbehebungshandbuch

Keysight Technologies

Keysight Technologies U3401A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U2741A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U1252B Kurzanleitung

Keysight Technologies

Keysight Technologies U1253B Handbuch

Keysight Technologies

Keysight Technologies 34450A Bedienungsanleitung

Keysight Technologies

Keysight Technologies EDU34450A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U1241C Bedienungsanleitung

Keysight Technologies

Keysight Technologies Truevolt 34461A Kurzanleitung

Keysight Technologies

Keysight Technologies 34450A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U1450 Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies EDU34450A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U2741A Bedienungsanleitung

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung