Keysight Technologies EDU36311A Bedienungsanleitung

User’s Guide

EDU36311A

Triple Output

Programmable

DC Power Supply

Notices 4

Manual Part Number 4

Edition 4

Published by 4

Warranty 4

Technology Licenses 4

U.S. Government Rights 5

Third Party Licenses 5

Waste Electrical and Electronic Equipment (WEEE) 5

Declarations of Conformity 5

Safety Information 6

Safety and Regulatory Information 7

Safety Considerations 7

Safety Symbols 8

Regulatory Markings 9

South Korean Class A EMC declaration: 9

Safety and EMC Requirements 9

Environmental Conditions 10

1 Getting Started 11

Product Introduction 12

Front panel at a glance 12

Rear panel at a glance 14

Meter view 15

Dimension diagram 16

Setup the instrument 16

Prepare Instrument for Use 17

Initial inspection 17

Standard shipped items 17

Documentation and firmware revisions 17

Recommended calibration interval 17

Options and Fuse Information 18

Ensure the correct AC input voltage and fuse settings 18

Programming Ranges 20

Installation 21

Connecting the power cord 21

Connecting the outputs 22

Parallel and series connections 24

Interface Connections 26

Remote Interface Configuration 29

Keysight IOLibraries Suite 29

LAN configuration 29

Using sockets 34

More about IP addresses and dot notation 34

Use the Built-in Help System 35

View the help information for the front panel key 35

Firmware Update 36

Front Panel Menu Reference 37

2 General Operating Information 38

Turning the Unit On 39

2Keysight EDU36311A User's Guide

View the error log 40

Controlling the Outputs 41

Step 1 - Select an output 41

Step 2 - Set the output voltage and current 41

Step 3 - Enable the output 42

Step 4 - View the output voltage and current 42

Constant voltage and constant current 43

Using the Protection Function 44

Protection function 44

Configuring protection 44

Clears and OVP and OCP Event 46

Using the Tracking Operation 47

Configuring the Output Turn On Turn Off Sequence 48

Step 1 – Set the output voltage and current of the output channels: 48

Step 2 – Configure the turn-on turn-off delays: 48

Step 3 – Use the All Outputs On and Off keys: 48

Saving and Recalling States from Instrument 49

Store Settings 49

Recall Settings 52

Power On Setting 53

Set to Defaults 53

Locking/Unlocking the Front Panel 54

Capturing a Screen 54

Utilities Menu 55

Utilities Menu - I/O Configuration 56

LAN Settings 56

LAN Reset 57

Utilities Menu - Instrument Setup 58

Calibration 58

Self Test 58

Utilities Menu - User Settings 59

Language 59

Sound 59

Display 59

Date / Time 60

Utilities Menu - Help 61

About 61

Error 61

3 Characteristics and Specifications 62

Keysight EDU36311A User's Guide 3

Notices

No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or

translation into a foreign language) without prior agreement and written consent from Keysight Technologies as

governed by United States and international copyright laws.

Manual Part Number

EDU36311-90002

Edition

Edition 1, February 2021

Published by

Keysight Technologies

Bayan Lepas Free Industrial Zone

11900 Bayan Lepas, Penang

Malaysia

Warranty

THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED “AS IS,” AND IS SUBJECT TO BEING CHANGED,

WITHOUT NOTICE, IN FUTURE EDITIONS. FURTHER, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE

LAW, KEYSIGHT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, WITH REGARD TO THIS MANUAL

AND ANY INFORMATION CONTAINED HEREIN, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. KEYSIGHT SHALL NOT BE LIABLE FOR ERRORS

OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, USE, OR

PERFORMANCE OF THIS DOCUMENT OR OF ANY INFORMATION CONTAINED HEREIN. SHOULD KEYSIGHT AND

THE USER HAVE A SEPARATE WRITTEN AGREEMENT WITH WARRANTY TERMS COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH THESE TERMS, THE WARRANTY TERMS IN THE SEPARATE AGREEMENT

SHALL CONTROL.

Technology Licenses

The hardware and/or software described in this document are furnished under a license and may be used or copied

only in accordance with the terms of such license.

4Keysight EDU36311A User's Guide

U.S. Government Rights

The Software is “commercial computer software,” as defined by Federal Acquisition Regulation (“FAR”) 2.101.

Pursuant to FAR 12.212 and 27.405-3 and Department of Defense FAR Supplement (“DFARS”) 227.7202, the U.S.

government acquires commercial computer software under the same terms by which the software is customarily

provided to the public. Accordingly, Keysight provides the Software to U.S. government customers under its

standard commercial license, which is embodied in its End User License Agreement (EULA), a copy of which can be

found at http://www.keysight.com/find/sweula. The license set forth in the EULA represents the exclusive authority

by which the U.S. government may use, modify, distribute, or disclose the Software. The EULA and the license set

forth therein, does not require or permit, among other things, that Keysight: (1) Furnish technical information

related to commercial computer software or commercial computer software documentation that is not customarily

provided to the public; or (2) Relinquish to, or otherwise provide, the government rights in excess of these rights

customarily provided to the public to use, modify, reproduce, release, perform, display, or disclose commercial

computer software or commercial computer software documentation. No additional government requirements

beyond those set forth in the EULA shall apply, except to the extent that those terms, rights, or licenses are explicitly

required from all providers of commercial computer software pursuant to the FAR and the DFARS and are set forth

specifically in writing elsewhere in the EULA. Keysight shall be under no obligation to update, revise or otherwise

modify the Software. With respect to any technical data as defined by FAR 2.101, pursuant to FAR 12.211 and

27.404.2 and DFARS 227.7102, the U.S. government acquires no greater than Limited Rights as defined in FAR

27.401 or DFAR 227.7103-5 (c), as applicable in any technical data.

Third Party Licenses

Portions of this software are licensed by third parties including open source terms and conditions. For more

information, please contact Keysight support, www.keysight.com/find/assist.

Waste Electrical and Electronic Equipment (WEEE)

This product complies with the WEEE Directive) marketing requirement. The affixed product label (see below)

indicates that you must not discard this electrical/electronic product in domestic household waste.

Product Category: With reference to the equipment types in the WEEE directive Annex 1, this product is classified as

“Monitoring and Control instrumentation” product. Do not dispose in domestic household waste.

To return unwanted products, contact your local Keysight office, or see

about.keysight.com/en/companyinfo/environment/takeback.shtml for more information.

Declarations of Conformity

Declarations of Conformity for this product and for other Keysight products may be downloaded from the Web. Go

to https://regulations.about.keysight.com/DoC/default.htm. You can then search by product number to find the

latest Declaration of Conformity.

Keysight EDU36311A User's Guide 5

Safety Information

A CAUTION notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that, if not correctly per-

formed or adhered to, could result in damage to the product or loss of important data. Do not proceed beyond a CAUTION notice

until the indicated conditions are fully understood and met.

A WARNING notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that, if not correctly per-

formed or adhered to, could result in personal injury or death. Do not proceed beyond a WARNING notice until the indicated con-

ditions are fully understood and met.

6Keysight EDU36311A User's Guide

Safety and Regulatory Information

Safety Considerations

The following general safety precautions must be observed during all phases of operation, service, and repair of this

instrument. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates

safety standards of design, manufacture, and intended use of the instrument. Keysight Technologies assumes no

liability for the customer's failure to comply with these requirements.

BEFORE APPLYING POWER

– Verify that the product is set to match the available line voltage and that the correct fuse is installed. Use the label

on the rear of the instrument to configure the power. See Options and Fuse Information for additional details.

– Ensure the mains supply voltage fluctuation do not exceed ±10% of the nominal supply voltage.

GROUND THE INSTRUMENT

This product is a Safety Class I instrument (provided with a protective earth terminal). To minimize shock hazard, the

instrument chassis and cabinet must be connected to an electrical ground. The instrument must be connected to the

AC power supply mains through a three-conductor power cable, with the third wire firmly connected to an electrical

ground (safety ground) at the power outlet. Any interruption of the protective(grounding) conductor or dis-

connection of the protective earth terminal will cause a potential shock hazard that could result in personal injury. If

the instrument is to be energized via an external autotransformer for voltage reduction, be certain that the auto-

transformer common terminal is connected to the neutral (earthed pole) of the AC power lines (supply mains).

DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE OR WET ENVIRONMENTS

Do not operate the device around flammable gases or fumes, vapor, or wet environments.

DO NOT OPERATE DAMAGED OR DEFECTIVE INSTRUMENTS

Instruments that appear damaged or defective should be made inoperative and secured against unintended oper-

ation until they can be repaired by qualified service personnel.

DO NOT SUBSTITUTE PARTS OR MODIFY INSTRUMENT

Because of the danger of introducing additional hazards, do not install substitute parts or perform any unauthorized

modification to the instrument. Return the instrument to a Keysight Technologies Sales and Service Office for service

and repair to ensure that safety features are maintained. To contact Keysight for sales and technical support, refer to

the support links on the following Keysight website: www.keysight.com/find/assist (worldwide contact inform-

ation for repair and service).

USE THE POWER CORD PROVIDED

Use the device with the power cord provided with the shipment.

USE THE DEVICE AS SPECIFIED

If the device is used in a manner not specified by manufacturer, the device protection may be impaired.

DO NOT BLOCK VENTILATION HOLES

Do not block any of the ventilation holes of the device.

OBSERVE ALL DEVICE MARKINGS BEFORE CONNECTING TO DEVICE

Observe all markings on the device before connecting any wiring to the device.

Keysight EDU36311A User's Guide 7

TURN DEVICE OFF BEFORE CONNECTING TO OUTPUT TERMINALS

Turn off the device power before connecting to the output terminals.

ENSURE COVER IS SECURED IN PLACE

Do not operate the device with the cover removed or loosened.

TURN DEVICE OFF ANDREMOVEALL CONNECTIONS BEFORE INSTALLING THEGPIB INTERFACE

Turn off the power and remove all connections, including the power cord, from the instrument prior installation of

the GPIB interface.

CLEAN WITH SLIGHTLY DAMPENED CLOTH

Clean the outside of the instrument with a soft, lint-free, slightly dampened cloth. Do not use detergent, volatile

liquids, or chemical solvents.

Connect USB cable with ferrite core to the rear panel USB port of the instrument.

Safety Symbols

Symbol Description

Caution, risk of danger (refer to the manual for specific Warning or Caution information)

Protective earth (ground) terminal.

Frame or chassis (ground) terminal.

Alternating current (AC).

Plus, positive polarity.

Minus, negative polarity.

The WARNING sign denotes a hazard. It calls attention to a procedure, practice, or the like, which, if not correctly

performed or adhered to, could result in personal injury. Do not proceed beyond a WARNING sign until the indicated

conditions are fully understood and met.

The CAUTION sign denotes a hazard. It calls attention to an operating procedure, or the like, which, if not correctly

performed or adhered to, could result in damage to or destruction of part or all of the product. Do not proceed beyond

CAUTION sign until the indicated conditions are fully understood and met.

The NOTE sign denotes important information. It calls attention to a procedure, practice, condition or the like, which is

essential to highlight.

8Keysight EDU36311A User's Guide

Regulatory Markings

Symbol Description

The RCM mark is a registered trademark of the Australian Communications and Media Authority.

The CE mark is a registered trademark of the European Community. This CE mark shows that the product

complies with all the relevant European Legal Directives.

ICES/NMB-001 indicates that this ISM device complies with the Canadian ICES-001.

Cet appareil ISM est conforme a la norme NMB-001 du Canada.

ISM GRP.1 Class A indicates that this is an Industrial Scientific and Medical Group 1 Class A product.

This symbol indicates the time period during which no hazardous or toxic substance elements are expected to

leak or deteriorate during normal use. Forty years is the expected useful life of the product.

This symbol is a South Korean Class A EMC Declaration. This is a Class A instrument suitable for professional

use and in electromagnetic environment outside of the home.

The CSA mark is a registered trademark of the Canadian Standards Association.

South Korean Class A EMC declaration:

Information to the user:

This equipment has been conformity assessed for use in business environments. In a residential environment this

equipment may cause radio interference.

– This EMC statement applies to the equipment only for use in business environment.

사용자안내문

이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가

정용 환경에서 사용하는 경우 전파간섭의 우려가 있습니다.

–사용자 안내문은 “업무용 방송통신기자재”에만 적용한다.

Safety and EMC Requirements

This power supply is designed to comply with the following safety and EMC (Electromagnetic Compatibility)

requirements:

– Low Voltage Directive 2014/35/EU

– EMC Directive 2014/30/EU

Keysight EDU36311A User's Guide 9

Environmental Conditions

The EDU36311A is designed for indoor use and in an area with low condensation. The table below shows the

general environmental requirements for this instrument.

Environmental condition Requirement

Temperature Operating condition: 0 °C to 40 °C

Storage condition: –20 °C to 70 °C

Humidity Operating condition: Up to 80% RH at 40 °C (non-condensing)

Storage condition: Up to 90% RH at 65 °C (non-condensing)

Altitude Up to 2000 m

Pollution degree 2

Overvoltage category II

Power supply and line frequency 100 V/115 V/230 V, 50/60Hz

Power consumption 300 VA maximum

10 Keysight EDU36311A User's Guide

Inhaltsverzeichnis

Andere Keysight Technologies Stromversorgung Handbücher

Keysight Technologies

Keysight Technologies RP7900 Series Service-Handbuch

Keysight Technologies

Keysight Technologies E36300 Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies RP7970 Series Service-Handbuch

Keysight Technologies

Keysight Technologies E36300 Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies E36100 Series Service-Handbuch

Keysight Technologies

Keysight Technologies 87421A Service-Handbuch

Keysight Technologies

Keysight Technologies U8030A Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies E36150 Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies N6700 Bedienungsanleitung

Keysight Technologies

Keysight Technologies E3646A Handbuch

Keysight Technologies

Keysight Technologies E3633A Bedienungsanleitung

Keysight Technologies

Keysight Technologies N6900 Series Service-Handbuch

Keysight Technologies

Keysight Technologies N69100 Series Service-Handbuch

Keysight Technologies

Keysight Technologies E364 A Series Handbuch

Keysight Technologies

Keysight Technologies 66312A Bedienungsanleitung

Keysight Technologies

Keysight Technologies E3620A Service-Handbuch

Keysight Technologies

Keysight Technologies U3606A Bedienungsanleitung

Keysight Technologies

Keysight Technologies N6700C Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies N8921A Bedienungsanleitung

Keysight Technologies

Keysight Technologies 66332A Betriebsanleitung

Keysight Technologies

Keysight Technologies E36200 Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies E36100B Series Service-Handbuch

Keysight Technologies

Keysight Technologies E364xA Series Handbuch

Keysight Technologies

Keysight Technologies N2779A Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung