Keysight U1115A Bedienungsanleitung

Keysight U1115A Remote Logging Display

Operating Instructions

The Keysight U1115A Remote Logging display is designed to be used with the

Keysight U1200 Series handheld meters, Keysight U1117A IR-to-Bluetooth®1

Adapter, Keysight U1177A IR-to-Bluetooth Adapter and mobile/software2

applications to provide you a total wireless remote connectivity solution.

With the U1115A, you can view readings from up to four handheld meters

simultaneously, from an extended distance of up to 100-metres (U1117A) within

the line-of-sight.

Figure 1 Keysight wireless remote connectivity solution

Standard Shipped Items Checklist

The following items are included with your purchase:

• U1115ARemoteLoggingDisplay.

• Three1.5VAAbatteries.

• USBtomicroUSBcable(forexternalpoweronly).

• OperatingInstructions(thisbooklet).

• SoftCarryingCase.

1The Bluetooth®word mark and logos are registered trademark owned by Bluetooth SIG, Inc and any

use of such marks by Keysight is under license. Other trademark and trade names are those of their

respective owners.

2The Keysight U1115A only supports Keysight Handheld Meter Logger software for downloading logged data

to PC via a Bluetooth connection.

Keysight U1200

Series handheld

meters

U1115A remote

logging display

WindowsPC

Android devices

iOSdevices

U1117A IR-to-

Bluetooth adapter

U1177A IR-to-

Bluetooth adapter

KeysightPCApplicationSoftware2

Keysight Handheld Meter

Logger

Keysight Mobile Application2

Keysight Mobile Meter

Keysight Mobile Logger

Product Characteristics

Temperature Operating condition:–20°Cto55°C

Storage condition:–40°Cto70°C

Relative Humidity (R.H) Operating condition:Upto80%at40°C(non-condensing)

Storage condition: Upto95%at40°C(non-condensing)

Dimension (W x L x H) 92.0 mm × 107.9 mm × 33.5 mm

Weight 238 g with batteries , 170 g without batteries.

Battery Type •Lithium24–LF(ANSI)andFR03(IEC)

•Alkaline24A(ANSI/NEDA)andLR03(IEC)

•ZincChloride24D(ANSI/NEDA)andR03(IEC)

Battery Lifespan •Lithium batteries: 30 hours

•Alkalinebatteries:20hours

Power Consumption Maximum1VAfor3AAbatteries

Maximum5V+10%,250mAforexternalpower

AutoPowerOffmode,currentconsumption3mA

Warranty Oneyear(Doesnotcovernormalwearandtearof

mechanical parts and batteries)

Bluetooth BluetoothSPPprole,Class1device

Compatibility Keysight Handheld Meter/Display:

•KeysightU1200SeriesHandheldMeters

•KeysightU1117AIR-to-Bluetooth Adapter

•KeysightU1177AIR-to-Bluetooth Adapter

Keysight Application Software:

•KeysightHandheldMeterLogger

Hardware Device:

•WindowsPC(withBluetooth-enabled)

Regulatory The U1115A complies with the requirements of the

following product standards:

•EMCEN301489–1:V1.9.2

EN301489–17:V2.1.1

EN55022:2006+A1:2007+A2:2010

(Group1ClassA)

EN55024:1998+A1:2001+A2:2003

+A3:2010

•RF(Bluetooth)EN300328V1.7.1(2006–10)

•RF(Health)EN62311:2008

Regulatory •Safety EN60950–1:2006+A11:2009

+A1:2010+A12:2011

“This telecommunication equipment conforms to the

NTCtechnicalrequirement”

Table 1Connectivitydistance(approximate)withintheline-of-sight

U1177A U1117A U1115A

U1177A – – 10 m

U1117A – – 100 m

U1115A 10 m 100 m –

Other Class 1 devices 10 m 100 m 100 m

Other Class 2 devices 10 m 10 m 10 m

•FCC:ThedevicecontainsFCCID:QOQWT11IA

•CanadaIC:ThedevicecontainstransmitterIC:5123A–BGTWT11IA

•TocomplywithFCCandIndustryCanadaRFradiationexposurelimitsfor

general population, the antenna(s) used for this transmitter must be

installed such that a minimum separation distance of 20 cm is maintained

between the radiator (antenna) and all persons at all times and must not be

colocated or operating in conjunction with any other antenna or transmitter.

•“La operación de este equipo está sujeta a las siguientes dos condiciones:

(1) es posible que este equipo o dispositivo no cause interferencia

perjudicial y (2) este equipo o dispositivo debe aceptar cualquier

interferencia,incluyendolaquepuedacausarsuoperaciónnodeseada.”

•TheradiomodulecertiedbyJapaneseRadioLawisintegratedinside.

•NCCWarningStatement:

•Article12

Withoutpermission,anycompany,rmorusershallnotalterthe

frequency, increase the power, or change the characteristics and

functionsoftheoriginaldesignofthecertiedlowerpowerfrequency

electric machinery.

•Article14

The application of low power frequency electric machineries shall not

affect the navigation safety nor interfere a legal communication, if an

interference is found, the service will be suspended until improvement is

made and the interference no longer exists.

Front View

Sampling annunciator Time indicator

Batteryindicator

Functionkeys

LoggerkeyNavigationkeys

Meterkey

Figure 2FrontviewoftheU1115ARemoteLoggingDisplay

Side View

Slide power switch

Stand

Externalpowerport

(microUSBport)

Figure 3SideviewoftheU1115ARemoteLoggingDisplay(standingposition)

HOLD MODE CONNECT SETTINGS

01:01

Meter

Logger

Back View

Slide power switch

Stand

Batterycover

with magnetic

holder

Figure 4BackviewoftheU1115ARemoteLoggingDisplay

Turning On the U1115A

To turn on the U1115A , set the slide power switch to On. (as shown in gure 4)

•OnceaconnectedIR-to-Bluetooth Adapter is turned off, below

scenarios will occur :

1 The Not Connected annunciator will appear on the display.

2 Subsequently, the annunciator will appear after 15 s-20 s.

Supplying External Power to the U1115A

1PlugthemicroUSBheadtothemicroUSBportonthesideoftheU1115A.

(refer to gure 3)

2PlugtheUSBconnectortoaUSBpowersourcetosupplyexternalpowertothe

U1115A.

•ThemicroUSBportontheU1115Aservesasanexternalpowerport

and not for data transfer or battery charger.

•BatteriescanbeleftintheU1115Awhenoperatingfromexternalpower.

Installing and Replacing the Batteries

MakesureyouturnofftheU1115Abeforeinstallingorreplacingthe

batteries.

ToavoidtheU1115Abeingdamagedfrombatteryleakage:

Always remove dead batteries immediately.•

Always remove the batteries and store them separately if the•

U1115A is not going to be used for a long period of time.

Remove the battery protective sheet

beforeusingforthersttime.

1 2

3 4

Connecting to Devices

EnsurethattheLinkLEDatthe

IR-to-Bluetooth adapter

isblinkingbeforeestablishinga

connection.

Power cycle if necessary.

FrontviewoftheU1117A

IR-to-Bluetooth adapter

PresstoenterConnection

Manager. (U1115A)

TypicalConnectionManagerdisplay.

Press to add

devices.

Press to scan for

devices.

TypicalAvailableDevicesdisplay.

Press to navigate to

desired device.

CONNECT

Back

A> Add Device

B> Add Device

C> Add Device

D> Add Device

Bluetooth Enter

Connection Manager

01:01

Enter

57AE5B

Scan Select

U1177A-2718DE

Available

345

Scan

Connecting to Devices (continued)

Press to select the desired device. Typical connection menu display.

Press to navigate to desired

function.

Select• Connect tomakeaconnection.

Select• Cancel to cancel a connection.

Select• Pairing PIN : 1234 to change

PINnumber.EnsurethattheU1115A

and the IR-to-Bluetooth adapter(s)

havematchingPINnumber(s).

Select• Connect at Startup to set

thedevicetoconnectonstartup.By

selecting this option, it will determine

the number of views as shown in

Table 2 below.

8 9

10 11

Select

ConnectionManagercanaddupto4devicesatanyonetime.

Meter view is automatically selected based on the table below :

Table 2 Meter view selection

Connected

devices Connect At Startup Meter view

1 1-meter view

2 2-meter view

3 or 4 4-meter view

Meter View

Typical screen display when no meter is

connected to the U1115A.

Typical screen display when one meter

is connected to the U1115A.

Typical screen display when two meters

are connected to the U1115A.

Typical screen display when three

or four meters are connected to the

U1115A.

The U1115A screen display will show ----- when:

1Nometerisconnected.

2 Meter(s) function/mode is not supported by the U1115A.

3 When the user changes the meter’s function. Typical wait time is 5s.

01:01

HOLD MODE CONNECT SETTINGS

- - - - -

A> U1117A-57AE5B Not Connected

A> U1273A-MY51430008U1117A-57AE5B

A> U1273A-MY51430008

B> U1177A-2718DE U1272A-MY52800017

U1117A-57AE5B

U1273A-MY51430008

A> U1272A-MY52800017

B> U1177A-2718DE

U1252B-MY51040033

C> U1117A-2391BA Not Connected

U1117A-57AE5B

1 2

3 4

Identifying a Connected Meter

The identify meter function allows you to easily identify your connected meter(s).

To identify the connected meter, follow the steps below :

1In the meter view, select the desired meter and press CONNECT.

2Then, navigate to the desired connected device and press Identify.

3Themetercorrespondstotheselecteddevicewillbeepandashit’sbacklight.

Selecting Measurement Mode

Typical meter view display.

Press to navigate

to the desired

meter.

Press to enter

mode menu.

Typical mode menu display.

The active window will be highlighted.

Press to select

desired mode. In

thisexample,ACV

is selected.

Press to exit mode

menu.

MODE

U1273A-MY51430008 U1272A-MY52800017

B> U1177A-2718DE

U1252B-MY51040033

C> U1117A-2391BA Not Connected

A> U1117A-57AE5B

MODEHOLD CONNECT SETTINGS

123

Vac

U1273A-MY51430008 U1272A-MY52800017

B> U1177A-2718DE

U1252B-MY51040033

C> U1117A-2391BA Not Connected

A> U1117A-57AE5B

Vac Vdc Vacdc

Meter

Inhaltsverzeichnis

Andere Keysight Monitor Handbücher

Keysight

Keysight U3402A Fehlerbehebungshandbuch

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung