Keysight U3606A Handbuch

Keysight U3606A

Multimeter|DC Power Supply

User’s and

Service Guide

U3606A User’s and Service Guide 3

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Keysight

Technologies as governed by United States

and international copyright laws.

Manual Part Number

U3606-90013

Edition

Edition 11, November 2017

Keysight Technologies

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Keysight disclaims all warran-

ties, either express or implied, with

regard to this manual and any infor-

mation contained herein, including

but not limited to the implied warran-

ties of merchantability and fitness for

a particular purpose. Keysight shall

not be liable for errors or for inciden-

tal or consequential damages in con-

nection with the furnishing, use, or

performance of this document or of

any information contained herein.

Should Keysight and the user have a

separate written agreement with

warranty terms covering the material

in this document that conflict with

these terms, the warranty terms in the

separate agreement shall control.

Technology Licenses

The hardware and or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Keysight provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

4 U3606A User’s and Service Guide

Safety Symbols

The following symbols on the instrument and in the documentation indicate precautions

that must be taken to maintain safe operation of the instrument.

Direct current (DC) Off (supply)

Alternating current (AC) On (supply)

Both direct and alternating current Caution, risk of electric shock

Three-phase alternating current Caution, risk of danger (refer to this manual

for specific Warning or Caution information)

Earth (ground) terminal Caution, hot surface

Protective conductor terminal Out position of a bi-stable push control

Frame or chassis terminal In position of a bi-stable push control

Equipotentiality Category II 300 V overvoltage protection

Equipment protected throughout by

double insulation or reinforced

insulation

CAT II

300 V

U3606A User’s and Service Guide 5

General Safety Information

WARNING

• Do not use the device if it is damaged. Before you use the device,

inspect the casing. Look for cracks or missing plastic. Do not operate

the device around explosive gas, vapor, or dust.

• Always use the device with the cables provided.

• Observe all markings on the device before establishing any

connection.

• Turn off the device and application system power before connecting

to the I/O terminals.

• When servicing the device, use only the specified replacement parts.

• Do not operate the device with the cover removed or loosened.

• Use only the power adapter provided by the manufacturer to avoid

any unexpected hazards.

CAUTION

•If the device is used in a manner not specified by the manufacturer, the

device protection may be impaired.

•Always use dry cloth to clean the device. Do not use ethyl alcohol or

any other volatile liquid to clean the device.

•Do not permit any blockage of the ventilation holes of the device.

6 U3606A User’s and Service Guide

Environmental Conditions

This instrument is designed for indoor use and in an area with low condensation. The table

below shows the general environmental requirements for this instrument.

Environmental conditions Requirements

Operating temperature 0 °C to 55 °C

Storage temperature –40 °C to 70 °C

Relative humidity Up to 80% at 30 °C RH (non-condensing)

NOTE

The U3606A Multimeter|DC Power Supply complies with the following safety and

EMC requirements:

•IEC 61010-1:2001/EN61010-1:2001 (2nd Edition)

•Canada: CAN/CSA-C22.2 No. 61010-1-04

•USA: ANSI/UL 61010-1:2004

•IEC 61326-1:2005/EN61326-1:2006

•CISPR11:2003/EN55011:2007, Group 1 Class A

•Canada: ICES/NMB-001:2004

•Australia/New Zealand: AS/NZS CISPR 11:2004

U3606A User’s and Service Guide 7

Regulatory Markings

The CE mark is a registered trademark

of the European Community. This CE

mark shows that the product complies

with all the relevant European Legal

Directives.

The C-tick mark is a registered

trademark of the Spectrum

Management Agency of Australia. This

signifies compliance with

the Australia EMC Framework

regulations under the terms of the

Radio Communication Act of 1992.

ICES/NMB-001 indicates that this ISM

device complies with the Canadian

ICES-001.

Cet appareil ISM est confomre a la

norme NMB-001 du Canada.

This instrument complies with the

WEEE Directive (2002/96/EC) marking

requirement. This affixed product label

indicates that you must not discard

this electrical or electronic product in

domestic household waste.

The CSA mark is a registered

trademark of the Canadian Standards

Association.

8 U3606A User’s and Service Guide

Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

This instrument complies with the WEEE Directive (2002/96/EC) marking requirement.

This affixed product label indicates that you must not discard this electrical or electronic

product in domestic household waste.

Product Category:

With reference to the equipment types in the WEEE directive Annex 1, this instrument is

classified as a “Monitoring and Control Instrument” product.

The affixed product label is as shown below.

Do not dispose in domestic household waste

To return this unwanted instrument, contact your nearest Keysight Technologies, or visit:

www.keysight.com/environment/product

for more information.

U3606A User’s and Service Guide 9

In This Guide…

1 Getting Started

This chapter prepares the U3606A Multimeter|DC Power Supply for use, and contains a

brief description of the instrument front panel, display, keypad, terminals, and rear panel.

2 Digital Multimeter Operation

This chapter contains detailed information on how to take measurements using the

U3606A Multimeter|DC Power Supply. It also describes the various multimeter functions

and features available in the U3606A.

3 DC Power Supply Operation

This chapter contains examples on how to operate the DC power supply from the front

panel. The simple examples discussed in this chapter shows you how to program the

output voltage and current functions, the protection functions, and the additional source

functions.

4 System Related Operation

This chapter lists the various items and settings in the utility menu. This chapter also

describes how to store and recall an instrument state with the U3606A Multimeter|DC

Power Supply.

5 Verification and Performance Tests

This chapter contains the procedures for verification of the instrument performance. The

input connections and test setup for each verification procedure is also described in this

chapter.

6 Calibration Procedures

This chapter contains the procedures for the instrument adjustment (calibration). You must

first unsecure the instrument before any adjustment can be done. The steps to secure and

unsecure the instrument for calibration are also described in this chapter.

7 Disassembly and Repair

This chapter will help you troubleshoot a failing instrument. It also describes how to obtain

repair service and lists the replaceable assemblies.

10 U3606A User’s and Service Guide

8 Characteristics and Specifications

This chapter specifies the characteristics, environmental conditions, and specifications of

the U3606A.

9 List of Error Messages

The U3606A error messages are summarized in this chapter.

Andere Handbücher für U3606A

Inhaltsverzeichnis

Andere Keysight Multimeter Handbücher

Keysight

Keysight U1251B Bedienungs- und Wartungsanleitung

Keysight

Keysight U1241AN Handbuch

Keysight

Keysight U1231A Bedienungsanleitung

Keysight

Keysight U1242C Bedienungsanleitung

Keysight

Keysight U1253B Bedienungsanleitung

Keysight

Keysight U3606B Bedienungsanleitung

Keysight

Keysight U1271A Bedienungsanleitung

Keysight

Keysight U1252B Handbuch

Keysight

Keysight U2741A Bedienungsanleitung

Keysight

Keysight U1241C Bedienungsanleitung

Keysight

Keysight M9181A Benutzerhandbuch

Keysight

Keysight 3458A Gebrauchs- und Pflegehandbuch

Keysight

Keysight 34401A Bedienungsanleitung

Keysight

Keysight EDU34450A Bedienungsanleitung

Keysight

Keysight U3402A Bedienungsanleitung

Keysight

Keysight U1271A Bedienungsanleitung

Keysight

Keysight U1281A Bedienungsanleitung

Keysight

Keysight U1241B Handbuch

Keysight

Keysight 34401A Technisches Handbuch

Keysight

Keysight 3458B Gebrauchs- und Pflegehandbuch

Keysight

Keysight U3606B Bedienungsanleitung

Keysight

Keysight U3606A Bedienungsanleitung

Keysight

Keysight U1271A Bedienungsanleitung

Keysight

Keysight U1253B Bedienungsanleitung

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung