Keysight U5850 Series Bedienungsanleitung
Keysight U5850 Series
TrueIR Thermal Imager
Quick Start
Guide
2 Keysight U5850 Series Quick Start Guide
Contacting Keysight
www.keysight.com/find/assist
(worldwide contact information for
repair and service)
Safety and EMC Information
The U5850 Series TrueIR Thermal
Imager is safety-certified in
compliance with IEC 60825-1:2001
/EN 60825-1:2001 (Laser Class 2)
and IEC 61010-1:2010/
EN 61010-1:2010 for pollution
degree 2 environment.
EMC is designed in compliance
with:
– IEC 61326-1:2005/EN
61326-1:2006
– CISPR11:2003/EN 55011:2007,
Group 1 Class A
– Canada: ICES/NMB-001:
Issue 4, June 2006
– Australia/New Zealand: AS/NZS
CISPR 11:2004
Use with standard or compatible
accessories.
Safety Symbols
Safety Notices
CAUTION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly
performed or adhered to, could
result in damage to the product or
loss of important data. Do not
proceed beyond a CAUTION notice
until the indicated conditions are
fully understood and met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly
performed or adhered to, could
result in personal injury or
death. Do not proceed beyond a
WARNING notice until the
indicated conditions are fully
understood and met.
Caution, risk of danger
(refer to this manual for
specific Warning or
Caution information)
Laser radiation
2 Keysight U5850 Series Quick Start Guide
For further safety information details, refer to the
Keysight U5850 Series TrueIR Thermal Imager User’s Guide.
ENGLISH
Keysight U5850 Series Quick Start Guide 3
Keysight U5850 Series Quick Start Guide 3
ENGLISH
Standard Shipped Items
Verify that you have received the following items
in the shipment of your U5850 Series TrueIR
thermal imager:
✔U5850 Series TrueIR Thermal Imager
✔Hard carrying case
✔Power adapter and power cord
✔Li-Ion rechargeable battery
✔SD memory card
✔USB Standard-A to Mini Type-B interface
cable, 2 m
✔Video RCA to RCA interface cable, 2 m
✔Quick Start Guide (this manual)
✔Certificate of Calibration
If any item is missing or damaged, keep the
shipping materials and contact the nearest
Keysight Sales Office.
NOTE
– The descriptions and instructions in this manual
apply to the Keysight U5855A, U5856A, and
U5857A TrueIR Thermal Imager (hereafter
referred to as the U5850 Series).
– The model U5857A appears in all illustrations.
– All related documents and software are
available for download at www.keysight.com/
find/trueIRimager.
4 Keysight U5850 Series Quick Start Guide
4 Keysight U5850 Series Quick Start Guide
ENGLISH
Install and Charge the Battery
Video
DC 12V
Press to lock
firmly in place.
1
Allow at least 4 hours for
the battery to fully charge.
2
Indicates charging status:
– Charging: Red (flashing)
–Fullcharge:Off
(Refer to the User’s Guide
for details)
2a
Keysight U5850 Series Quick Start Guide 5
Keysight U5850 Series Quick Start Guide 5
ENGLISH
Insert the SD Memory Card
Turn On and Set Up the U5850 Series
Press for 1 second to turn on/off.
1
If you turn on the U5850 Series for the first time or
after a factory reset:
2
3
4
6 Keysight U5850 Series Quick Start Guide
6 Keysight U5850 Series Quick Start Guide
ENGLISH
5
Year: 00 to 99 (00: year 2000)
Month: 01 to 12
Date: 01 to 31
Push left/right to move the indicator.
Push up/down to increase/decrease the digits.
6
Repeat the same to set the time and unit.
7
8
Keysight U5850 Series Quick Start Guide 7
Keysight U5850 Series Quick Start Guide 7
ENGLISH
Quick-start tutorial:
9
To navigate the tutorial pages: To exit:
OR
10
11
Ready to take measurements with specified accuracy after
warm-up.
12
8 Keysight U5850 Series Quick Start Guide
8 Keysight U5850 Series Quick Start Guide
ENGLISH
Product Outlook
Front Right Left
1
234
5
6
7
8
9
10
11
1Infrared (IR) image camera lens
(with shutter) 7Video out port
2Visible image camera 8DC power inlet
3Laser pointer 9Battery cover
4Torch light 10 USB Mini-B port
5Focus adjustment ring 11 SD memory card slot
6
Camera trigger key
–Pressbrieflytotoggle
between the image freeze
(capture) or run operation.
– Press for 1 sec to perform a
quick-save.
Keysight U5850 Series Quick Start Guide 9
Keysight U5850 Series Quick Start Guide 9
ENGLISH
U5857A
Rear
LCD display
15
4
6
2
37
Legend Description
1Light/Laser
control key
– Press briefly to toggle the torch light on or off.
– Press and hold to turn on the laser pointer, and
release to turn it off.
2Camera/Zoom
key
– Press briefly to select the camera mode.
– Press for 1 second to access the zoom mode.
3Play/Delete key – Press briefly to play back saved images.
– Press for 1 second for delete operations.
4Navigation/Enter
key
– Press the center of the key briefly to use as an Enter
key or to access the Main Menu.
– Push the sides of the key for up/down/left/right
navigation. The left/right sides can be pushed to
open or close sub-menus.
5Power on/off
key[a] Press for 1 second to turn the U5850 Series on or off.
6Back/Exit key – Press briefly to return to the previous menu.
– Press for 1 second to exit any menu.
10 Keysight U5850 Series Quick Start Guide
10 Keysight U5850 Series Quick Start Guide
ENGLISH
7Auto/Manual
scale key
– Press briefly to switch from auto to manual scaling.
In the manual scaling mode, press briefly to perform
auto scaling once.
– Press for 1 second to switch from manual to auto
scaling.
[a] With LED status indicator. Refer to the U5850 Series TrueIR Thermal Imager
User’s Guide for details.
Legend Description
Inhaltsverzeichnis
Sprachen:
Andere Keysight Wärmebildkamera Handbücher
