note that button, menu, and tab names are identical on both platforms.
Step 3 - Insert the Keyspan 4-Port Print Server CD-ROM
Turn your computer ON. When your computer starts up, place the Keyspan 4-Port Print Server
CD into the CD-ROM drive.
MACINTOSH NOTE:
When the CD icon appears on your desktop, double click on its icon to display its contents.
Locate the Keyspan 4-Port Print Server Installer icon and double click to start the
installation process. Follow the instructions on screen.
WINDOWS NOTE:
Windows will automatically open the Keyspan CD Browser window. Using the on-screen
menus, locate the Keyspan 4-Port Print Server Installer selection and click it to start the
installation process. Follow the instructions on screen.
WINDOWS Tech Note: During and/or after the software installation, the Windows
New Hardware Wizard may ask you to install software several times. Select
'Install the software automatically' and click next until the New Hardware Wizard tells
you that the installation is finished. PLEASE NOTE that you will not be able to use your
4-Port Print Server until you complete the New Hardware Wizard process.
Step 4 - Running the Keyspan Server Utility application
Once the Keyspan installer completes, it will automatically launch the Keyspan Server Utility
application. You will use this utility to configure the 4-Port Print Server.
Tech Note: Firmware Update: The first time you launch the 4-Port Print Server
program, you may be asked to update your 4-Port Print Server's firmware. If you get
this message, please update your firmware as per the on screen instructions. Please
note that you can also find instructions on how to do this in the Updating Your Firmware
subsection in the Changing 4-Port Print Server's Settings section later in this manual.
In the Keyspan 4-Port Print Server window, click the Servers tab. You will now see your 4-Port
Print Server listed in this tab (see next image):
