Keyspan USB Server Bedienungs- und Wartungsanleitung

Keyspan USB Server QuickStart

Thank you for purchasing the Keyspan USB Server. This QuickStart guide is intended to

quickly get you up and running with your new Keyspan USB Server. For more detailed

instructions, please refer to the electronic documentation on your Keyspan CD.

STEP

S T E P

Hardware Installation

Connect your Keyspan USB Server to your network using a RJ45

Ethernet cable. Then connect the included power supply to your Keyspan

USB Server. You should now see lights on your Keyspan USB Server. When

the left-most (green) SYSTEM light starts blinking slowly (once every 3

seconds), proceed to the next step.

TROUBLESHOOTING

: If the do not see the left-most (green) SYSTEM light blinking

slowly, please read the detailed troubleshooting instructions located in the USB Server’s elec-

tronic user’s manual. This manual can be found on your Keyspan CD and web site.

Software Installation

Turn your computer ON. When your computer starts up, place the Keyspan

USB Server CD into the CD-ROM drive.

(Rev XIS-US4A.A0.0404)

KEYSPAN

Need help with this Keyspan product? Please contact us at:

web: www.keyspan.com/support/

fax: +1 510 222 0323

telephone: +1 510 222 8802

Pg 1

STEP

S T E P

STEP

S T E P

Finishing Up - Additional Help

You have now installed your Keyspan USB Server hardware and software as

well as learned how to use your  rst USB device via your USB Server. The

instructions provided here are intended to cover the basic use of the Keyspan

USB Server using our default settings. While our default settings are suit-

able for most uses, you may want to con gure the USB Server to use differ-

ent settings depending on your needs. Please refer to our electronic user’s

manual for more information about changing your settings.

Notes About Networks And Multiple Users

By default, the Keyspan USB Server can be accessible to your computer via

a LAN (local area network) or Wireless LAN. If you want additional users

to connect to your USB Server, you will need to install the Keyspan USB

Server software on each ‘client’ computer.

Notes About Firewalls

If you have installed a software or hardware  rewall, you may need to

con gure it to allow access to your USB Server. Please refer to our electronic

user’s manual for further details.

Keyspan USB Server QuickStart

Thank you for purchasing the Keyspan USB Server. This QuickStart guide is intended to

quickly get you up and running with your new Keyspan USB Server. For more detailed

instructions, please refer to the electronic documentation on your Keyspan CD.

STEP

S T E P

Hardware Installation

Connect your Keyspan USB Server to your network using a RJ45

Ethernet cable. Then connect the included power supply to your Keyspan

USB Server. You should now see lights on your Keyspan USB Server. When

the left-most (green) SYSTEM light starts blinking slowly (once every 3

seconds), proceed to the next step.

TROUBLESHOOTING

: If the do not see the left-most (green) SYSTEM light blinking

slowly, please read the detailed troubleshooting instructions located in the USB Server’s elec-

tronic user’s manual. This manual can be found on your Keyspan CD and web site.

Software Installation

Turn your computer ON. When your computer starts up, place the Keyspan

USB Server CD into the CD-ROM drive.

(Rev XIS-US4A.A0.0404)

KEYSPAN

Need help with this Keyspan product? Please contact us at:

web: www.keyspan.com/support/

fax: +1 510 222 0323

telephone: +1 510 222 8802

Pg 1

STEP

S T E P

STEP

S T E P

Finishing Up - Additional Help

You have now installed your Keyspan USB Server hardware and software as

well as learned how to use your  rst USB device via your USB Server. The

instructions provided here are intended to cover the basic use of the Keyspan

USB Server using our default settings. While our default settings are suit-

able for most uses, you may want to con gure the USB Server to use differ-

ent settings depending on your needs. Please refer to our electronic user’s

manual for more information about changing your settings.

Notes About Networks And Multiple Users

By default, the Keyspan USB Server can be accessible to your computer via

a LAN (local area network) or Wireless LAN. If you want additional users

to connect to your USB Server, you will need to install the Keyspan USB

Server software on each ‘client’ computer.

Notes About Firewalls

If you have installed a software or hardware  rewall, you may need to

con gure it to allow access to your USB Server. Please refer to our electronic

user’s manual for further details.

Pg 3

Pg 2

MACINTOSH

MACINTOSH: MACINTOSH

When the CD icon appears on your desktop, double click on its icon to display its contents.

Locate the Keyspan USB Server Installer icon and double click to start the installation

process. Follow the instructions on-screen.

WINDOWS

WINDOWS: WINDOWS

Windows will automatically open the Keyspan CD Browser window. Using the on-screen

menus, locate the Keyspan USB Server Installer selection and click it to start the installation

process. Follow the instructions on-screen.

WINDOWS Tech Note

: During and/or after the software installation, the Windows New

WINDOWS Tech Note: During and/or after the software installation, the Windows New WINDOWS Tech Note

Hardware Wizard may ask you to install software several times. Select ‘Install the software

automatically’. You may also get an additional prompt regarding logo testing, click ‘Contin-

ue Anyway’ to proceed. Please note that you may need to repeat this process up to 3 times.

Once the Keyspan installer completes, it will automatically launch the

Keyspan USB Server application. Once this window opens, proceed to the

next step.

Using Your First USB Device Via The Keyspan USB Server

Physically connect your  rstUSB device (ie printer, scanner, etc) to any USB

port on the USB Server. Then open the Keyspan USB Server application.

MACINTOSH

MACINTOSH:MACINTOSH

The Keyspan USB Server application is located in your Applications folder.

WINDOWS

WINDOWS:WINDOWS

The Keyspan USB Server application is located in your START menu -> PROGRAMS ->

KEYSPAN USB SERVER.

Once the Keyspan USB Server application is open, click on the

USB

Devices

tab. You will notice your USB device located under the

Other

Devices

heading.

To use your USB device, select your device by clicking on its name and then

click the

Connect

button at the bottom of the USB Devices tab. This will

move your USB device to the

My Devices

heading. You can now use your

device as if it is directly connected to your computer.

When you are  nished using your USB device, select your USB device and

click the

Disconnect

button at the bottom of the USB Devices tab. This

will return your USB devices to

Other Devices

and make your device

available to other USB Server users. To use additional USB devices, repeat

this step.

TROUBLESHOOTING

: If you do not see your USB device in the Keyspan USB Server

application, please read the detailed troubleshooting instructions located in the USB Server’s

electronic user’s manual. This manual can be found on the Keyspan CD and web site.

STEP

S T E P

Pg 3

Pg 2

MACINTOSH

MACINTOSH: MACINTOSH

When the CD icon appears on your desktop, double click on its icon to display its contents.

Locate the Keyspan USB Server Installer icon and double click to start the installation

process. Follow the instructions on-screen.

WINDOWS

WINDOWS: WINDOWS

Windows will automatically open the Keyspan CD Browser window. Using the on-screen

menus, locate the Keyspan USB Server Installer selection and click it to start the installation

process. Follow the instructions on-screen.

WINDOWS Tech Note

: During and/or after the software installation, the Windows New

WINDOWS Tech Note: During and/or after the software installation, the Windows New WINDOWS Tech Note

Hardware Wizard may ask you to install software several times. Select ‘Install the software

automatically’. You may also get an additional prompt regarding logo testing, click ‘Contin-

ue Anyway’ to proceed. Please note that you may need to repeat this process up to 3 times.

Once the Keyspan installer completes, it will automatically launch the

Keyspan USB Server application. Once this window opens, proceed to the

next step.

Using Your First USB Device Via The Keyspan USB Server

Physically connect your  rstUSB device (ie printer, scanner, etc) to any USB

port on the USB Server. Then open the Keyspan USB Server application.

MACINTOSH

MACINTOSH:MACINTOSH

The Keyspan USB Server application is located in your Applications folder.

WINDOWS

WINDOWS:WINDOWS

The Keyspan USB Server application is located in your START menu -> PROGRAMS ->

KEYSPAN USB SERVER.

Once the Keyspan USB Server application is open, click on the

USB

Devices

tab. You will notice your USB device located under the

Other

Devices

heading.

To use your USB device, select your device by clicking on its name and then

click the

Connect

button at the bottom of the USB Devices tab. This will

move your USB device to the

My Devices

heading. You can now use your

device as if it is directly connected to your computer.

When you are  nished using your USB device, select your USB device and

click the

Disconnect

button at the bottom of the USB Devices tab. This

will return your USB devices to

Other Devices

and make your device

available to other USB Server users. To use additional USB devices, repeat

this step.

TROUBLESHOOTING

: If you do not see your USB device in the Keyspan USB Server

application, please read the detailed troubleshooting instructions located in the USB Server’s

electronic user’s manual. This manual can be found on the Keyspan CD and web site.

STEP

S T E P

Andere Keyspan Server Handbücher

Keyspan

Keyspan US-4A Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung