CONTROLS
1. FUZZ makes your signal overdriven, dirty and massive.
Higher settings increase the distortion and sustain of
tone. Lower settings have great dynamics and pick
sensitivity.
2. DEEP controls the amount of lows going into the Scuzz
Box and dramatically inuences the overall dynamics,
dening the character of the tone before the gain
stage. It allows you to match your guitar, pedal and
amp to harmonize as a perfect trio. Deep determines
whether the tone is fat and massive or overdrive-like
with a faster attack. At the lowest setting, the bass
remains tight. At the highest setting you can achieve
a boomy bass overload with endless sustain.
3. VOLUME sets the output volume of the pedal. Warning:
at higher settings, the Scuzz Box has a massive output.
This pedal gets LOUD!
4. TONE is a natural hi-cut control with a very wide range. Turn it clockwise for more high end, turn it
counterclockwise to cut highs.
5. The SCUZZ/FUZZ switch –The dramatic character of the Scuzz Box shines in its two distinct modes:
Scuzz and Fuzz.
The FUZZ is a highly dynamic, articulate fuzz tone. Every note is meant to be heard and it cleans up
beautifully with your guitar volume.
The SCUZZ brings a dangerous, unique and biting sound. It is an unpredictable, ruckus velcro-type
gated fuzz with a nasty, gnarly and buzzy tone with ripping textures. Thanks to a cleverly-used gating
eect, the sustaining notes die quickly with virtually no residual noise. The nal sound is mercurial and
oscillating with tinges of 8-bit. It’s pretty wild. Note that the Scuzz is too powerful and the sound too
highly compressed to be controlled by your guitar’s volume. It can be silent or extremely loud: nothing
in between.
6. BUFFER eliminates the unwanted oscillation that may occur with eects placed in front of the Scuzz
Box. The switch helps retain clarity and eliminates passive signal loss in longer cables. There are no rules
for having the Buer On or O - let your ears be the judge.
Bypass mode True Bypass
Dimensions 120 x 65 x 40 mm deep (Width x Depth x Height)
Input Connector Type Standard ¼” jack – mono/TS
Output Connector Type Standard ¼” jack – mono/TS
Power Input Standard 9V Battery or 9V DC (center negative) power supply.
SUPPORT
For any questions or comments please drop us a message at support@khdkelectronics.com
SPECIFICATIONS
WWW.KHDKELECTRONICS.COM
1
2
5
3
4
6
