Kichler Lighting 34832 Bedienungsanleitung

Français p. 9

Español p. 17

ITEM #0810289, 31885173

MODEL #34832

5-LIGHT PENDANT

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-554-6504, 8 a.m. - 4:30 p.m, EST, Monday - Friday.

kichler.com/customer-care/contact-us

PACKAGE CONTENTS

1 3

Canopy

Mounting Bracket

Threaded Nipple

Hex Nut

Socket

Coupling

Threaded Pipe

Screw Collar Ring

Screw Collar Loop

Fixture Loop

Chain

PART DESCRIPTION QTY.

Decorative Ring

Support Pipe

Glass Panel

Socket Assembly

Support Pipe Cover

Sub-Canopy Top

Glass Bracket

Glass Bracket Screw

Fixture Cage

Sub-Canopy

Threaded Chain Link

PART DESCRIPTION QTY.

2 43

HARDWARE CONTENTS

Wire

Connector

Short

Machine

Screw

Qty: 3

Qty: 2

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or

install the product.

WARNING

• CAUTION – RISK OF SHOCK –

Disconnect Power at the main circuit breaker panel or main fusebox before starting and

during the installation.

• WARNING:

This fixture is intended for installation in accordance with the National Electrical Code

(NEC) and all local code specifications. If you are not familiar with code requirements,

installation by a certified electrician is recommended.

• Do not use bulbs with wattage greater than specified on this fixture.

• California Proposition 65

WARNING: This product can expose you to chemicals including lead, which is known to

the State of California to cause cancer, birth defects, or other reproductive harm.

For more information, go to http://www.P65Warnings.ca.gov

CAUTION

• If you have any doubts about how to install this lighting fixture, or if the fixture fails to

operate completely, please contact a licensed electrical contractor.

• All parts must be used as indicated in these instructions. Do not substitute any parts,

leave parts out, or use any parts that are worn out or broken. Failure to obey this

instruction could invalidate ETL listing and/or C.S.A. certification of this fixture.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to

assemble the product.

Estimated assembly time: 30 minutes to 1 hour

Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers,

electrical tape, ladder, safety glasses.

4 53

ASSEMBLY INSTRUCTIONS

1. Place glass panel (N) inside the fixture cage (T)

so it rests inside.

2. Screw support pipe (M) onto fixture cage (T).

Next, lower support pipe cover (P) over the

support pipe (M).

Place the glass bracket (R) up against the glass

panel (N) and secure in place with a glass

bracket screw (S).

Repeat for remaining glass panels.

Note: The electrical cable will need to get pulled

through the individual parts as they are installed

on this and later steps.

ASSEMBLY INSTRUCTIONS

456

5. Position threaded nipple (C) in mounting bracket

(B) so when mounted:

• The threaded nipple (C) will protrude a

minimum of 1/4 inch beyond the raised center

portion of the mounting bracket (B).

• The threaded nipple (C) height is

positioned so 1/2 the exterior threads of

the screw collar loop (I) will extend past the

canopy (A) when it is mounted.

Note: Canopy is only needed to

determine the position of the threaded nipple

and fixture loop. It will be installed later.

1/4 Inch

4. Screw fixture loop (J) onto threaded pipe (G).

Screw the threaded pipe (G) onto coupling (F).

3. Lower decorative ring (L), sub-canopy (U), and

sub-canopy top (Q) over support pipe (M) and

secure with coupling (F).

ASSEMBLY INSTRUCTIONS

5 6 7

61/4 Inch

6. Once the proper position of the threaded nipple

determined, secure with hex nuts (D) as follows:

• Screw one hex nut (D) onto the threaded

nipple (C) and tighten against the raised

portion of the mounting bracket (B).

• Screw another hex nut (D) onto the threaded

nipple (C) and tighten against the flat portion

of the mounting bracket (B).

• Screw the remaining hex nut (D) onto

threaded nipple (C) and tighten against the

screw collar loop (I).

Hardware Used

Short Machine

Screw

x 2

7. Connect mounting bracket (B) to the outlet box

with short machine screws (BB).

8. Using the threaded chain links (V) on chain (K),

attach one end to screw collar loop (I) and the other

end to fixture loop (J). Weave the fixture electrical

and ground wires through every other chain link and

pass through threaded nipple (C) into outlet box.

Lower the screw collar ring (H) and canopy (A) over

the chain (K).

Outlet Box

ASSEMBLY INSTRUCTIONS

6 7 8

Hardware Used

x 3Wire Connector

9.Wire connection guide:

Ground wire:

•For installation in the United States: Wrap

ground wire from outlet box around ground

screw preassembled on mounting bracket

(B) no less than 2 in. from wire end. Tighten

ground screw. If fixture is supplied with a

ground wire, connect to outlet ground wire

with a wire connector (AA).

• For installation in Canada: If fixture is

supplied with ground wire, wrap ground wire

around ground screw on mounting bracket

(B). Tighten ground screw. Connect fixture

ground wire to outlet ground wire with the

wire connector (AA).

Supply wires:

• Connect the Neutral (White) supply wire from

the outlet box to the Neutral fixture wire

(White or Parallel Cord “D” shaped and

ribbed).

• Connect the Hot (Black) supply wire from the

outlet box to the Hot fixture wire (Black or

Parallel Cord round and smooth).

NOTE:

Fixture wires will either be:

• Black and White.

• Parallel Cord SPT-1 lamp wire with one

round smooth wire and one “D” shaped

ribbed wire.

BARE COPPER,

OR GREEN

GROUND

SUPPLY WIRE

BARE COPPER,

OR GREEN

GROUND

FIXTURE

WIRE

BLACK FIXTURE

WIRE

WHITE FIXTURE

WIRE

BLACK SUPPLY

WIRE

BLACK SUPPLY

WIRE

PARALLEL

FIXTURE CORD

(ROUND AND

SMOOTH)

PARALLEL FIXTURE

CORD (“D” SHAPED

AND RIDGED

)

WHITE SUPPLY

WIRE

WHITE SUPPLY

WIRE

10.Pass canopy (A) over the screw collar loop (I).

Attach screw collar ring (H) to screw collar loop

(I) to secure canopy (A).

ASSEMBLY INSTRUCTIONS

CARE AND MAINTENANCE

7 8 9

TROUBLESHOOTING

Fixture does not light. 1. Fixture may be wired incorrectly.

1. Check wiring.

2. Worn or broken bulb. 2. Replace bulb.

1. Check wiring.

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

• Always be certain that electric current is turned off before cleaning this item.

• Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on

fixture, as it will damage the metal finish.

• All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not

wash shades in an automatic dishwasher.

11. Insert 60-watt max. candelabra-base bulb (not

included) into socket (E).

Repeat for remaining sockets.

REV 29-SEP-2021 Printed in China

Distributed by:

Kichler Lighting LLC

7711 E. Pleasant Valley Rd.

Cleveland, OH 44131

ARTICLE #0810289, 31885173

MODÈLE #34832

LUMINAIRE SUSPENDU

À 5 LUMIÈRES

Des questions, des problèmes, des pièces manquantes? Avant de retourner le produit à

votre détaillant, appelez notre service à la clientèle au 1-800-554-6504, entre 8 h et 16 h 30

(HNE) du lundi au vendredi. kichler.com/customer-care/contact-us

JOIGNEZ VOTRE REÇU ICI

Numéro de série Date d’achat

CONTENU DE L’EMBALLAGE

10 11

Pavillon

Support de fixation

Raccord fileté

Écrou hexagonal

Douille

Raccord

Tube fileté

Bague de l’anneau du pavillon

Anneau de suspension du pavillon

Anneau de suspension du luminaire

Chaîne

Bague décoratif

Tube de soutien

Panneau en verre

Assemblage douille

Plaque de finition du tube de soutien

Plaque de finition du sous-pavillon

Support du verre

Vis pour support du verre

Cage du luminaire

Sous-pavillon

Maillons de chaîne fileté

PIÈCE DESCRIPTION QTÉ PIÈCE DESCRIPTION QTÉ

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kichler Lighting Telefonzubehör Handbücher

Kichler Lighting

Kichler Lighting 82352 Bedienungsanleitung

Beliebte Telefonzubehör Handbücher anderer Marken

BT DIVERSE 5400 Bedienungsanleitung

Tadiran Telecom

Tadiran Telecom EMERALD ICE Bedienungsanleitung

Musicam

Musicam FieldFone II Bedienungsanleitung

Polycom

Polycom KIRK KIRK 4040 Technisches Datenblatt

TIPTEL

TIPTEL DECT Set 50 Bedienungsanleitung

Panasonic

Panasonic KX-UDS124 Bedienungsanleitung

BT BT7600 Technisches Datenblatt

View

View VP-PC Bedienungsanleitung

Baldwin Boxall

Baldwin Boxall BT8 Bedienungsanleitung

SMC Networks

SMC Networks SMCDPCR-AP Bedienungsanleitung

SkyLink

SkyLink SD-001 Bedienungsanleitung

Nera

Nera ISDN Bedienungsanleitung

MCheeta

MCheeta CT-CID803 Plus Bedienungsanleitung

YASKAWA

YASKAWA YRC1000 Bedienungsanleitung

Intellitouch

Intellitouch MOH-500E Bedienungsanleitung

Viking

Viking SQRG-12 Gebrauchsanweisung

Clarity

Clarity CE225 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen beocom 1401 Bedienungsanleitung