Kicker PTRTP Bedienungsanleitung

select language seleccione el idioma choisir la langue sprache auswählen

KICKER PTRTP

Powered Down-Firing Thin Proﬁle

Subwoofer Enclosure with Passive Radiator

Owner’s Manual

Manual del Propietario

Manuel d’utilisation

Benutzerhandbuch

1English

Contents

Overview........................ 2

Speciﬁcations........................ 3

Installation ...................... 5

Wiring ................................... 5

Mounting............................... 8

Operation....................... 9

Remote Bass Installation ...... 11

Troubleshooting............ 12

Warranty ...................... 13

Int. Warranty

Garantía | Garantie........ 15

49PTRTP-c-23

2English

Overview

IMPORTANT SAFETY WARNING

PROLONGED CONTINUOUS OPERATION OF AN AMPLIFIER, SPEAKER, OR

SUBWOOFER IN A DISTORTED, CLIPPED OR OVER-POWERED MANNER

CAN CAUSE YOUR AUDIO SYSTEM TO OVERHEAT, POSSIBLY CATCHING

FIRE AND RESULTING IN SERIOUS DAMAGE TO YOUR COMPONENTS

AND/OR VEHICLE. AMPLIFIERS REQUIRE UP TO 4 INCHES (10CM) OPEN

VENTILATION. SUBWOOFERS SHOULD BE MOUNTED WITH AT LEAST 1

INCH (2.5CM) CLEARANCE BETWEEN THE FRONT OF THE SPEAKER AND

ANY SURFACE. KICKER PRODUCTS ARE CAPABLE OF PRODUCING SOUND

LEVELS THAT CAN PERMANENTLY DAMAGE YOUR HEARING! TURNING UP A

SYSTEM TO A LEVEL THAT HAS AUDIBLE DISTORTION IS MORE DAMAGING

TO YOUR EARS THAN LISTENING TO AN UNDISTORTED SYSTEM AT THE

SAME VOLUME LEVEL. THE THRESHOLD OF PAIN IS ALWAYS AN INDICATOR

THAT THE SOUND LEVEL IS TOO LOUD AND MAY PERMANENTLY DAMAGE

YOUR HEARING. PLEASE USE COMMON SENSE WHEN CONTROLLING

VOLUME.

TO AVOID POTENTIAL INJURY OR POSSIBLE DEATH FROM FORWARD

MOVEMENT OF THE ENCLOSURE DURING ABRUPT STOPS OR ACCIDENTS,

THE ENCLOSURE MUST BE PROPERLY INSTALLED AND SECURELY

FASTENED TO YOUR VEHICLE. YOU ARE SOLELY RESPONSIBLE FOR

SECURELY FASTENING THE ENCLOSURE IN YOUR VEHICLE. MAKE SURE

THE MOUNTING SCREWS WILL NOT PUNCTURE THE GAS TANK/BRAKE

LINES/WIRING OR INTERFERE WITH ANY MECHANICAL PARTS ON THE

UNDERSIDE OF THE MOUNTING SURFACE.

The PTRTP builds on the overwhelming success

of our down-ﬁring, thin-proﬁle subwoofer enclosure

by adding a signature KICKER ampliﬁer to power it.

Sporting a passive radiator and KICKER ampliﬁcation,

this box has been perfectly tuned and engineered

from all angles, acoustic and electric, to be the

absolute best-sounding, most-efﬁcient, and loudest

enclosure possible. Complete your system with a

pair of KICKER coaxial speakers and mulit-channel

ampliﬁer for an uncompromising audio experience.

Use this manual to install and operate your PTRTP

Enclosure.

3English

Model: PTRTP10 PTRTP12

Woofer [in, cm] 10, 25 12, 30

Height [in, cm] 5-5/8, 14.2 6-1/8, 15.6

Width [in, cm] 25-5/8, 65 27-1/2, 70

Depth [in, cm] 13-1/4, 33.5 14-5/8, 37

RMS Power @ 14.4V 400 500

Speciﬁcations Common to All Models

Frequency response [Hz] 25–120

Electronic Crossover 12dB/octave Lowpass 50–120Hz;

12dB/octave Highpass @ 25Hz

Phase Switch 0° / 180°

Input Sensitivity Low Level 125mV-5V, Hi Level 1V-40V

KickEQ™ Bass Boost Variable to +6dB @ 40Hz

Signal-to-Noise ratio [dB] >90dB, A-weighted, re: rated power

Remote Bass Control Included

Speciﬁcations

4English

PTRTP10

PTRTP12

5English

Installation

Wiring

Disconnect the vehicle’s battery to avoid an electrical

short.

1. Make the ground wire as short as possible, 24”

(60cm) or less, and connect the ground wire to a

paint-and-corrosion-free, solid, metal area of the

vehicle’s chassis.

2. Connect the ground wire to the Quick-Connect

Power Plug.

3. Run power wire to the battery.

4. Install a fuse holder in-line with the power wire as

close as possible to the battery (withing 18”), making

sure there is no fuse installed in the fuse holder.

5. Connect the power wire to the Quick-Connect

Power Plug.

6. Connect remote wire to the Quick-Connect Power

Plug (See Automatic Turn-On section to learn more).

7. Connect the Quick-Connect Power Plug to the

ampliﬁer.

8. Install the recommended fuse into the in-line fuse

holder.

9. If you ever need to remove the enclosure from

the vehicle after it has been installed, please make

sure to remove the fuse from the fuse holder on the

power wire ﬁrst before unplugging the quick-connect

power plug. The ground wire should be the last

wire disconnected – just the opposite as when you

installed it.

Model External Fuse (sold separately) Power/Ground Wire KICKER Wiring Kit

PTRTP10 1 x 40 Ampere 4 Gauge KMPK4, PK4, CK4

PTRTP12 1 x 60 Ampere 4 Gauge KMPK4, PK4, CK4

6English

fuse

quick-connect

power plug

Ground

Remote Turn-On

(see page 8)

≤18”

(45cm)

7English

Connect the wiring pigtail to the ampliﬁer’s audio

inputs, then connect the audio output from your

source unit to the RCA inputs.

If needed, cut off the RCA connections to use hi-

level input, or use the KICKER KISL Speaker-RCA

Converter.

quick-connect wiring

harness audio inputs:

White Left +

White/Black Left –

Grey Right +

Grey/Black Right –

8English

Mounting

Choose a structurally sound location to mount your

KICKER powered subwoofer enclosure. Make sure

the mounting screws will not puncture the gas tank/

brake lines/wiring or interfere with any mechanical

parts on the underside of the mounting surface.

Choose a location that allows at least 4” (10cm) of

open ventilation for the ampliﬁer. If possible, mount

the enclosure in the climate-controlled passenger

compartment. A ﬂat surface is required.

If the supplied mounting hardware is not applicable

to your installation, some other means of securely

attaching the enclosure to the vehicle must be used.

Mount the brackets to the

bottom of the enclosure

using the supplied smaller

screws. Securely attach

the enclosure to the

vehicle with the supplied

larger screws.

9English

Operation

Automatic Turn-On: KICKER powered enclosures

offer two different automatic turn-on modes; +12V

and DC Offset.

• Remote Turn-On: Run 18 gauge wire from the

Remote Turn-On Lead on your source unit to the

Remote Turn-On input of the Terminal Adapter.

• DC Offset Turn-On: The DC Offset mode detects

a >2.5V DC offset from the HI-Level speaker outputs

when the source unit has been turned on.

Input Level: The inputs on KICKER powered

enclosures are capable of receiving either Hi

(speaker-level) or Low-level (RCA) signals from your

source unit. Set the Input Level switch on the side

panel to match the outputs of your source unit.

Input Gain Control: The input gain control is not a

volume control. It matches the output of the source

unit to the input level of the ampliﬁer. Maximum power

out of the ampliﬁer is possible with the gain in the

Inhaltsverzeichnis

Andere Kicker Subwoofer Handbücher

Kicker

Kicker Soundgate SWRA406 Bedienungsanleitung

Kicker

Kicker L7T8 Bedienungsanleitung

Kicker

Kicker KICKER CompVT CVT10 Bedienungsanleitung

Kicker

Kicker CompVR C18d Bedienungsanleitung

Kicker

Kicker SOLO-BARIC S15L7 Bedienungsanleitung

Kicker

Kicker Solo-Baric L7 S15L7 Bedienungsanleitung

Kicker

Kicker CompVR CVR10 Bedienungsanleitung

Kicker

Kicker PTRTP10 Bedienungsanleitung

Kicker

Kicker SOLO-BARIC L7S12 Bedienungsanleitung

Kicker

Kicker Solo-Baric L7-Series Bedienungsanleitung

Kicker

Kicker SOLO-BARIC S10L3 Bedienungsanleitung

Kicker

Kicker PSON13MY Bedienungsanleitung

Kicker

Kicker KMW10 Bedienungsanleitung

Kicker

Kicker PRAMCQ09 Bedienungsanleitung

Kicker

Kicker S12L5 Bedienungsanleitung

Kicker

Kicker PSUTA15 Bedienungsanleitung

Kicker

Kicker 8L7 Bedienungsanleitung

Kicker

Kicker SOLO-BARIC S15L7 Bedienungsanleitung

Kicker

Kicker BassStation PT8 Bedienungsanleitung

Kicker

Kicker SoloX 49L7X151 Bedienungsanleitung

Kicker

Kicker CompVR C8vr Bedienungsanleitung

Kicker

Kicker KMW10 Bedienungsanleitung

Kicker

Kicker CompVT CVT12 Bedienungsanleitung

Kicker

Kicker CompVR CVR10 Bedienungsanleitung

Beliebte Subwoofer Handbücher anderer Marken

Sony

Sony XS-AW8 Bedienungsanleitung

Sony

Sony XS-L836 Bedienungsanleitung

B&C Speakers

B&C Speakers 15 HPL 76W Bedienungsanleitung

Velodyne

Velodyne DD-18+ Bedienungsanleitung

Sonance

Sonance Cinema Series SUB 10-150 Bedienungsanleitung

Hifonics

Hifonics HW-12 Kurzanleitung

Magnat Audio

Magnat Audio ADR 130 BP Bedienungsanleitung

Blitz

Blitz BZP106 Bedienungsanleitung

Technics

Technics SB-AS500 Bedienungsanleitung

Lyngdorf

Lyngdorf BW-2 Bedienungsanleitung

Lyngdorf

Lyngdorf BW-3 Bedienungsanleitung

Pyle Pro

Pyle Pro PYLE PRO PDW15125 Bedienungsanleitung

REL Acoustics

REL Acoustics Q Series Bedienungsanleitung

Pioneer

Pioneer Elite S-W1EX Bedienungsanleitung

L-Acoustics

L-Acoustics KIVA SB15M Kurzanleitung

B&C Speakers

B&C Speakers Woofer 12 HPL 76 Bedienungsanleitung

KEF

KEF KUBE 200 Bedienungsanleitung

Yamaha

Yamaha SW500 Bedienungsanleitung