Kidde KN-COP-DP-10YL Bedienungsanleitung

P/N 2547-7201-01 EN Rev. A

ATTE TIO : Please take a few minutes to thoroughly read this

user guide which should be saved for future reference and passed

on to any subsequent owner.

C rbon Monoxide Al rm

User G ide

Model: KN-COP-DP-10YL (900-0280)

AC Plug-in Operated with Sealed Lithium Battery Backup

2547-7201-01_EN.qxp__ 15-6-1 上午11:56 页 1

Carbon Monoxide Alarm Procedure

If alarm sounds 4 quick beeps, 5 seconds off:

1) Immediately move to fresh air - outdoors or by an open

door/window. Do a head count to check that all persons are

accounted for. Do not re-enter the premises nor move away

from the open door/window until the emergency services

responders have arrived, the premises have been aired out, and

your alarm remains in its normal condition.

2) Call your emergency services ( ire Department or 911);

ever restart the source of a CO problem until it has been

corrected. ever ignore the sound of the alarm!

If the alarm is sounding, pressing the Test/Hush button will

terminate the alarm. If the CO condition that caused the alert

in the first place continues, the alarm will reactivate. If the

unit alarms again within six minutes, it is sensing high levels

of CO which can quickly become a dangerous situation.

WARNING:

Activation of the CO

Alarm indicates the presence of Carbon

Monoxide (CO) which can kill you.

PHONE NUMBER:

Wh t to do When the Al rm Sounds!

2547-7201-01_EN.qxp__ 15-6-1 上午11:56 页 2

Welcome

ote: Many times throughout this User Guide, we will refer to

Carbon Monoxide as “CO”.

This Kidde carbon monoxide (CO) alarm is an important part of your

family’s home safety plan. This alarm has been designed and tested to

detect CO buildup in a residential environment. Your alarm is for use

specifically in the home, but not for use in a boat or recreational vehicle.

As an owner of a CO alarm, there are some basic facts you should know

about for your protection.

Many people think that CO alarms operate like smoke alarms. Like

smoke alarms, CO alarms monitor the air in your home and sound a

loud alarm to warn you of trouble. The way you respond to a CO alarm

is quite different than a smoke alarm. That’s because a house fire and a

CO problem are two distinctly different situations. If your smoke alarm

were to alarm, you would quickly be able to judge the level of danger

you were in with your senses. You can see and smell the smoke, feel the

heat, see, and possibly hear the fire burning. You can also readily see if

your smoke alarm is alarming in a non-emergency situation. Because

your sense of sight, smell, hearing and touch give you information, you

can almost instantly judge what action to take if you hear your smoke

alarm.

CO is an invisible, odorless, tasteless and non-irritating gas – completely

undetectable to your senses. That’s why it is important to your safety

that you have a CO alarm.

Important Warning Statements

IMPORTA T: This carbon monoxide alarm is designed to detect

carbon monoxide from A Y source of combustion. It is OT

designed to detect smoke, fire, or any other gas.

WAR I G: Carbon monoxide alarms are not smoke alarms.

This carbon monoxide alarm is not a substitute for installing and

maintaining an appropriate number of smoke alarms in your

home.

This carbon monoxide alarm will not sense smoke, fire, or any

poisonous gas other than carbon monoxide even though carbon

monoxide can be generated by fire. For this reason you must

install smoke alarms to provide early warning of fire and to

protect you and your family from fire and its related hazards.

CAUTIO : This alarm will only indicate the presence of carbon

monoxide at the sensor. Carbon monoxide may be present in

other areas.

2547-7201-01_EN.qxp__ 15-6-1 上午11:56 页 3

Important Warning Statements

WAR I G: This product is intended for use in ordinary indoor

locations of family living units, not for use in boats or

recreational vehicles. It is not designed to measure compliance

with commercial or industrial standards. It is not suitable for

installation in hazardous locations as defined in your local

building code.

The installation of this device should not be used as a substitute

for proper installation, use and maintenance of fuel burning

appliances, including appropriate ventilation and exhaust

systems. It does not prevent CO from occurring, nor can it solve

an existing CO problem.

WAR I G: This device is designed to protect individuals from

acute effects of carbon monoxide exposure. It may not fully

safeguard individuals with specific medical conditions. If in doubt,

consult a medical practitioner.

Individuals with medical problems may consider using warning

devices which provide audible and visual signals for carbon

monoxide concentrations under 30 PPM.

This carbon monoxide alarm requires a continuous supply of

electrical power – it will not work without power. Models

without battery backup will not operate during power failure.

This alarm has not been investigated for carbon monoxide

detection below 70 PPM.

Contents of This User Guide

1. Information About Carbon Monoxide

2. Product Features and Specifications

3. Installation Locations

4. Installation Instructions

5. Alarm Characteristics

6. Operating Characteristics

7. Maintenance

8. Limited Warranty

2547-7201-01_EN.qxp__ 15-6-1 上午11:56 页 4

1. Information About Carbon Monoxide

Gener l C rbon Monoxide Inform tion

Carbon monoxide is a colorless, odorless and tasteless poison gas that

can be fatal when inhaled. CO inhibits the blood’s capacity to carry

oxygen.

Periodically review this alarm user guide and discuss your CO alarm

emergency procedure with all the members of your family. Never ignore

a CO alarm. A true alarm is an indication of potentially dangerous levels

of CO. CO alarms are designed to alert you to the presence of CO

before an emergency – before most people would experience symptoms

of CO poisoning, giving you time to resolve the problem calmly.

Determine if anyone in the household is experiencing symptoms of CO

poisoning. Many cases of reported CO poisoning indicate that while

victims are aware they are not well, they become so disoriented they are

unable to save themselves by either exiting the building or calling for

assistance. Also, young children and household pets may be the first

affected. You should take extra precautions to protect high-risk persons

from CO exposure because they may experience ill effects from CO at

levels that would not ordinarily affect a healthy adult.

Symptoms of CO Poisoning

The following common symptoms are related to CO poisoning and

should be discussed with ALL members of the household.

Mild Exposure:

Slight headache, nausea, vomiting, fatigue (often described as “flu-like”

symptoms).

Medium Exposure:

Severe throbbing headache, drowsiness, confusion, fast heart rate.

Extreme Exposure:

Unconsciousness, convulsions, cardio-respiratory failure, death.

If you experience even mild symptoms of CO poisoning, consult your

doctor immediately!

2547-7201-01_EN.qxp__ 15-6-1 上午11:56 页 5

1. Information About Carbon Monoxide

C rbon Monoxide PPM Levels

Model KN-COP-DP-10YL is equipped with a digital display that shows

levels of CO (displayed in PPM – parts per million). Learn the difference

between dangerous, high, mid and low levels.

Dangerous Levels:

When someone is experiencing symptoms of CO poisoning and CO

readings are generally above 100 PPM. Anytime someone is experiencing

the symptoms of CO poisoning this should be treated as an emergency.

See “What to do When the Alarm Sounds” (inside front cover).

High Levels:

Generally above 100 PPM, with no one experiencing symptoms. This

should be treated as an urgent situation. See “What to do When the

Alarm Sounds” (inside front cover).

Mid Levels:

Generally between 50 PPM to 100 PPM. This should be cause for

concern and should not be ignored or dismissed. See “What to do

When the Alarm Sounds” (inside front cover).

Low Levels:

Generally below 50 PPM. Kidde recommends you take action to

eliminate the source of CO. See “What to do When the Alarm Sounds”

(inside front cover).

Possible Sources of C rbon Monoxide

Inside your home, appliances used for heating and cooking are the most

likely sources of CO. Vehicles running in attached garages can also

produce dangerous levels of CO.

CO can be produced when burning any fossil fuel, such as gasoline,

propane, natural gas, oil and wood. It can be produced by any fuel-

burning appliance that is malfunctioning, improperly installed, or not

ventilated correctly, such as:

• Automobiles, furnaces, gas ranges/stoves, gas clothes dryers, water

heaters, portable fuel burning space heaters and generators,

fireplaces, wood-burning stoves and certain swimming pool heaters.

• Blocked chimneys or flues, back drafts and changes in air pressure,

corroded or disconnected vent pipes, loose or cracked furnace

exchangers.

• Vehicles and other combustion engines running in an open or closed

garage, attached or near a home.

• Burning charcoal or fuel in grills and hibachis in an enclosed area.

2547-7201-01_EN.qxp__ 15-6-1 上午11:56 页 6

1. Information About Carbon Monoxide

Conditions Th t C n Produce C rbon Monoxide

The following conditions can result in transient CO situations:

• Excessive spillage or reverse venting of fuel-burning appliances caused

by outdoor ambient conditions, such as, wind direction and/or

velocity, including high gusts of wind, heavy air in the vent pipes

(cold/humid air with extended periods between cycles).

• Negative pressure resulting from the use of exhaust fans.

• Simultaneous operation of several fuel-burning appliances competing

for limited internal air.

• Vent pipe connections vibrating loose from clothes dryers, furnaces, or

water heaters.

• Obstructions in, or unconventional, vent pipe designs which can

amplify the above situations.

• Extended operation of unvented fuel-burning devices (range, oven,

fireplace, etc.).

• Temperature inversions which can trap exhaust gases near the ground.

• Vehicle idling in an open or closed garage, or near a home.

To be safe, know the possible sources of CO in your home. Keep fuel-

burning appliances and their chimneys and vents in good working

condition. Learn the early symptoms of exposure, and if you suspect CO

poisoning, move outside to fresh air and get emergency help. Your first

line of defense is an annual inspection and regular maintenance of your

appliances. Contact a licensed contractor or call your local utility

company for assistance.

Inform tion About C rbon Monoxide Al rms –

Wh t They C n nd C nnot Do:

CO alarms provide early warning of the presence of CO, usually before a

healthy adult would experience symptoms. This early warning is possible,

however, only if your CO alarm is located, installed and maintained as

described in this guide.

Because carbon monoxide is a cumulative poison, long-term exposures to low

levels may cause symptoms, as well as short-term exposures to high levels.

This Kidde unit has a time-weighted alarm – the higher the level of CO

present, the sooner the alarm will be triggered.

2547-7201-01_EN.qxp__ 15-6-1 上午11:56 页 7

1. Information About Carbon Monoxide

This CO alarm can only warn you of the presence of CO. It does not prevent

CO from occurring, nor can it solve an existing CO problem. If your unit has

alarmed and you’ve provided ventilation by leaving your windows and doors

open, the CO buildup may have dissipated by the time help responds.

Although your problem may appear to be temporarily solved, it’s crucial that

the source of the CO is determined and that the appropriate repairs are made.

This CO alarm is designed to act as a monitor; it is not designed for use as a

short-term testing device to perform a quick check for the presence of CO.

CO alarms have limitations. Like any other electronic device, CO alarms are

not fool-proof. CO alarms have a limited operational life. You must test your

CO alarm weekly, because it could fail to operate at any time.

If your CO alarm fails to test properly, or if its self-diagnostic test reveals a

malfunction, immediately have the unit replaced. This alarm will not monitor

CO levels while in an error condition.

CO alarms can only sense CO that reaches the unit’s sensor. It’s possible that

CO may be present in other areas without reaching the alarm. The rate and

ability that which CO reaches the alarm may be affected by:

• Doors or other obstructions.

• resh air from a vent, an open window or other source.

• CO being present on one level of the home and not reach a CO alarm

installed on a different level. ( or example, CO in the basement may not

reach an alarm on the second level, near the bedrooms).

or these reasons, we recommend you provide complete coverage by placing

a CO alarm on every level of the home. Please carefully read all information

on properly installing this CO alarm.

CO alarms should not be used to detect the presence of natural gas

(methane), propane, butane, or other combustible fuels.

2547-7201-01_EN.qxp__ 15-6-1 上午11:56 页 8

2. Product Features and Specifications

Model K -COP-DP-10YL

Alarm

So nder

Test/H sh

Btton

Red Alarm

Light

Digital

Display

Low B ttery W rning

If the battery power is low, the unit will chirp every 60 seconds,

and the display will show "Lb" to indicate the alarm must be

replaced. THE ALARM MUST BE REPLACED IMMEDIATELY!

Low B ttery HUSH®CONTROL

When the unit produces a low battery warning, the Low Battery

HUSH®feature allows you to press the Test/Hush button on the alarm

and disable the “chirp” for a period of approximately 10 hours. This

gives you a chance to replace the alarm at a more convenient time

without sacrificing your safety by disconnecting the alarm from

power. During this Low Battery HUSH®period, your alarm is

monitoring for CO.

If the alarm does not go into Low Battery Hush, the battery power is

below the Low Battery Hush threshold. REPLACE THE ALARM

IMMEDIATELY!

Ambient Light Sensor

This alarm includes a feature to determine dark or light conditions.

This feature will:

1. Help prevent low battery chirping at night, (when ambient

conditions are dark).

2. Dim the display in low light conditions, (night time and darker

rooms), and brighten the display in bright light conditions.

Green Operate

Light / Ambient

Light Sensor

Peak

Level

Deactivation /

Discharge Switch

Deactivation /

Discharge Switch Cover

Rotating AC Pl g

2547-7201-01_EN.qxp__ 15-6-1 上午11:56 页 9

2. Product Features and Specifications

End of unit life W rning

IMPORTA T: Ten (10) years after the initial power up, this alarm

will “beep” two times every 30 seconds to indicate that it is time

to replace the alarm. Display will show "End".

To help identify the date to replace the alarm, a label has been affixed to

the side of the alarm. Write the “replace by” date (ten years from power

up) in a permanent marker on this label.

End of unit life Hush Control

The End of unit Life Hush feature allows you to silence End of Unit life

chirping, for a period of 3 days, by pressing the Test/Hush button. This

feature can be used 10 times within 30 days, allowing you to replace

the alarm at a more convenient time. After 30 days, the alarm will no

longer detect CO. REPLACE ALARM IMMEDIATELY!"

Temperature:

Operating Range: 4.4°C (40° ) to 37.8°C (100° )

Humidity:

Operating range: 10-95% relative humidity (RH), non-condensing

Audible Alarm:

85+ dB at 10’ @ 3.4±0.5 KHz pulsing alarm

Sensor:

Electrochemical

Power:

120 volts AC, 60 Hz, 90 mA max, 3 volt sealed lithium battery backup

Alarm Response Times:

70 PPM = 60-240 min., 150 PPM = 10-50 min., 400 PPM = 4-15 min.

2547-7201-01_EN.qxp__ 15-6-1 上午11:56 页 10

Andere Handbücher für KN-COP-DP-10YL

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kidde Kohlenmonoxid-Alarm Handbücher

Kidde

Kidde KN-COB-IC Bedienungsanleitung

Kidde

Kidde K10LLCO Bedienungsanleitung

Kidde

Kidde C3010-CA Bedienungsanleitung

Kidde

Kidde KN-COPP-3-RC Bedienungsanleitung

Kidde

Kidde P4010ACSCO-WF Bedienungsanleitung

Kidde

Kidde CO120X Bedienungsanleitung

Kidde

Kidde KN-COSMXTR-BA Bedienungsanleitung

Kidde

Kidde 900-0213CA Bedienungsanleitung

Kidde

Kidde KN-COPP-B Bedienungsanleitung

Kidde

Kidde KN-COP-DP Bedienungsanleitung

Kidde

Kidde KN-COEG-3 (900-01 13) Bedienungsanleitung

Kidde

Kidde C3010 Bedienungsanleitung

Kidde

Kidde KN-COB-B-LP Bedienungsanleitung

Kidde

Kidde KN-COB-IC Bedienungsanleitung

Kidde

Kidde KN-COB-B-LS Bedienungsanleitung

Kidde

Kidde C3010 Bedienungsanleitung

Kidde

Kidde Nighthawk Bedienungsanleitung

Kidde

Kidde KN-COSM-IBA Bedienungsanleitung

Kidde

Kidde KN-COB-B-LS (900-0233) Bedienungsanleitung

Kidde

Kidde K7CO Bedienungsanleitung

Kidde

Kidde KN-COPP-3 Bedienungsanleitung

Kidde

Kidde KN-COB-DP2 Bedienungsanleitung

Kidde

Kidde 900-0235 Bedienungsanleitung

Kidde

Kidde KN-COB-LCB-A Bedienungsanleitung

Beliebte Kohlenmonoxid-Alarm Handbücher anderer Marken

Honeywell

Honeywell H450EN Bedienungsanleitung

First Alert

First Alert FCD2B Bedienungsanleitung

Honeywell

Honeywell SF350RVUL Bedienungsanleitung

Poolguard

Poolguard DAPT-2 Bedienungsanleitung

Ei Electronics

Ei Electronics Ei 261D Handbuch

Bacharach

Bacharach Model 105 Handbuch

Firex

Firex COZ-1 Bedienungsanleitung

Costar

Costar 12RV-D Bedienungsanleitung

First Alert

First Alert CO410 Bedienungsanleitung

FireAngel

FireAngel CO-9X Bedienungsanleitung

Costar

Costar 12-24SIR Bedienungsanleitung

System Sensor

System Sensor CO1224T Bedienungsanleitung

Deltronic Security

Deltronic Security CN-1231 Bedienungsanleitung

GE Interlogix

GE Interlogix 240 COE - Carbon Monoxide Alarm Bedienungsanleitung

Sygonix

Sygonix 2377794 Bedienungsanleitung

Convoy Tech

Convoy Tech CO311 Bedienungsanleitung

nest

nest PROTECT Bedienungsanleitung

Bosch

Bosch CRS-WLCD-TA869 Bedienungsanleitung