KIESELMANN ASi-Bus ES/ABSL 5630 010-000 Series Bedienungsanleitung

Operating instructions - Translation of the original -

25.4.12

KIESELMANN GmbH

Paul-Kieselmann-Str.4-10

D - 75438 Knittlingen



+49 (0) 7043 371-0Fax: +49 (0) 7043 371-125

www.kieselmann.desales@kieselmann.de

Control head ASi-Bus ES/ABSL

5630 xxx 010-000

with platine V4.x

for Double seat valve

Single seat valve

Butterfly valve

Ball valve

25.4.12

Operation instructions: Control head 5630xxx010-000

ASi-Bus ES/ABSL

1. List of contents ..............................................................................................................2

2. Information for your safety............................................................................................. 3

3. Marking of safety instructions in the operating manual ................................................. 3

4. Variants of control heads ASi-Bus ES/ABSL................................................................. 4

4.1 Double seat valve (pneum. Lifting valve) ............................................................ 4

4.2 Single seat valve (pneum. Lifting valve).............................................................. 4

4.3 Butterfly valve / Ball valve (pneum. Rotary valve).............................................. 4

5. Safety instructions........................................................................................................ 5

5.1 Field of application .............................................................................................. 5

5.2 General safety instructions.................................................................................. 5

5.3 General notes ..................................................................................................... 5

6. Function ........................................................................................................................ 5

6.1 Description of function ........................................................................................ 5

7. Maintenance.................................................................................................................. 5

8. Installation informations................................................................................................. 5

8.1 Installation instructions........................................................................................ 5

9. Initial operation .............................................................................................................. 6

10. Power supply / valve control.......................................................................................... 6

10.1 Standard variant.................................................................................................. 6

10.2 ES variant (plug P5)........................................................................................... 6

10.3 Switch-over Standard / ES (selector switch E).................................................... 6

10.4 JTAG Interface (plug P1) ................................................................................... 6

10.5 External inputs 1 (plug P4) and 2 (plug P3) ........................................................ 6

10.6 Valve interface (plug F)..................................................................................... 6

11. Electrical installation......................................................................................................7

11.1 Electrical connection of the control head ............................................................ 7

11.2 Terminal pin assignment ..................................................................................... 7

11.3 LED Indication of slave status / Selector switch (D)........................................... 7

11.4 Electrical connection design of control head ASi-Bus ES/ABSL......................... 8

12. Position control and position indication ......................................................................... 9

12.1 Lifting valve ......................................................................................................... 9

12.2 Rotary valve ...................................................................................................... 10

13. Electrical and pneumatical piloting ASi-Bus ES/ABSL................................................ 11

13.1 Valve piloting - Double seat valve ..................................................................... 11

13.2 Valve piloting - Lifting valve............................................................................... 12

13.3 Valve piloting - Rotary valve.............................................................................. 13

13.4 Bit-assignment external input............................................................................ 13

14. Demontage und Montage............................................................................................ 14

14.1 Disassembly...................................................................................................... 14

14.2 Assembly .......................................................................................................... 14

15. Spare parts list ............................................................................................................ 15

16. Technical data ............................................................................................................. 16

17. Fault clearance............................................................................................................ 16

1. List of contents

25.4.12

Operation instructions: Control head 5630xxx010-000

ASi-Bus ES/ABSL

2. Information for your safety

We are pleased that you have decided for a high-class KIESELMANN product. With correct application

and adequate maintenance, our products provide long time and reliable operation.

Before installation and initiation, please carefully read this instruction manual and the security advices

contained in it. This guarantees reliable and safe operation of this product and your plant respectively.

Please note that an incorrect application of the process components may lead to great material damages

and personal injury.

In case of damages caused by non observance of this instruction manual, incorrect initiation,

handling or external interference, guarantee and warranty will lapse!

Our products are produced, mounted and tested with high diligence. However, if there is still a reason

for complaint, we will naturally try to give you entire satisfaction within the scope of our warranty. We will

be at your disposal also after expiration of the warranty. In addition, you will also find all necessary instruc-

tions and spare part data for maintenance in this instruction manual. If you don't want to carry out the main-

tenance by yourself, our KIESELMANN service team will naturally be at your disposal.

3. Marking of safety instructions in the operating manual

Hintsareavailableinthechapter"safetyinstructions"ordirectlybeforetherespectiveoperationinstruction.

The hints are highlighted with a danger symbol and a signal word. Texts beside these symbols have to

be read and adhered to by all means. Please continue with the text and with the handling at the valve only

afterwards.

Symbol Signal word Meaning

DANGER Imminent danger which may cause

severe personal injury or death.

ATTENTION

Dangerous situation which may

cause slight personal injury or

material damages.

NOTE

Marks application hints and other

information which is particularly

useful.

25.4.12

Operation instructions: Control head 5630xxx010-000

ASi-Bus ES/ABSL

4. Variants of control heads ASi-Bus ES/ABSL

4.1 Double seat valve (pneum. Lifting valve)

4.2 Single seat valve (pneum. Lifting valve)

4.3 Butterfly valve / Ball valve (pneum. Rotary valve)

Valve function Electrical connection Solenoid valves Article No.

without lifts

Plug M12 4-pin

Socket plug M12 5-pin

1 solenoid valve 5630 201 010–000

with upper seat lift 2 solenoid valves 5630 202 010–000

with lower seat lift 2 solenoid valves 5630 206 010–000

with upper + lower seat lift 3 solenoid valves 5630 203 010–000

Valve function Electrical connection Solenoid valves Article No.

air open / spring closed

air closed / spring open

Plug M12 4-pin

Socket plug M12 5-pin

1 solenoid valve 5630 501 010–000

air closed / air open 2 solenoid valves 5630 502 010–000

Valve function Electrical connection Solenoid valves Article No.

air open / spring closed

air closed / spring open

Plug M12 4-pin

Socket plug M12 5-pin

1 solenoid valve 5630 801 010–000

air closed / air open 2 solenoid valves 5630 802 010–000

25.4.12

Operation instructions: Control head 5630xxx010-000

ASi-Bus ES/ABSL

5. Safety instructions

5.1 Field of application

The control heads are used to pilot valves of production systems of the beverage and foodstuff industry,

pharmaceutical industry, bio-technology, and chemical industry.

They contain the complete actuator, sensory, and electronic technology for connection and integration

to up-dated and efficient control systems.

5.2 General safety instructions

5.3 General notes

6. Function

The control head has been constructed in a modular system. Depending on the performance the pneu-

matic (three solenoid valves at maximum) and the electric control module with 2 position response syn-

chros (hall sensors on the board) have been integrated into the control head.

6.1 Description of function

The valve positions are displayed electrically (DUO - LED) and directly at the control head. The valve

positions "OPEN" and "CLOSED" are in addition displayed mechanically.

For robust operating conditions we recommend the use of the option stainless cab.

A pressure relieve valve serves as a pressure reduction in case of air leakages. The electric connection

is carried out via a electrical connection plug or a flat cable adapter at the control head. As a protection

against external influences, the cab can be leaded (only possible in the version - plastic cab)

7. Maintenance

The control head is maintenance-free. However, it is recommended to check the density of the air con-

nections at fixed intervals, The air pressure escapes at air leakages through a pressure control valve

into the open air.

8. Installation informations

8.1 Installation instructions

Generally the assembly and disassembly of the control head must occur de-energized.

ATTENTION

• To avoid danger and damage, the fitting must be used in accordance with the safety instructions

and technical data contained in the operating instructions.

DANGER

• The personnel responsible for the service and maintenance is instructed to carefully read and follow

this operating manual and to maintain the prescribed technical data.

The manufacturer will not be liable for any damages caused by improper use or handling.

• Make sure that the prevailing requirements of accident prevention and safety for electrical appli-

ances are complied with during the maintenance and repair works.

•

Never carry out electrical connections while the system is under energized.

ATTENTION

• Danger of injury by destruction of the housing cap, if the spindle cap is screwed in into the pulse generator

not completely (see Fig.2 /Page9). The spindle cap must be screwed in up to metallic limit stop on the

pulse generator.

NOTE

•

All data are in line with the current state of development. Subject to change as a result of technical

progress.

25.4.12

Operation instructions: Control head 5630xxx010-000

ASi-Bus ES/ABSL

9. Initial operation

•

Adjust the valve functions at the valve selector switch (D).

(Tab. 2, page 7)

•

Connect power supply.

(see “Electrical installation” on page 7)

•

Connect the control air pipe Ø 6x1 to the connection (17).

(Fig.7 /Page14)

•

Connect the compressed-air pipe Ø 6x1 to the connection (11).

(Fig.7 /Page14)

•

Check the pneumatic components for air leakages.

•

Check the valve functions by activating manually the solenoid valves (20a). The manual activator is

provided as slide switch at the front side of the solenoid valves (20a).

10. Power supply / valve control

10.1 Standard variant

The power supply to the control board is taken from the 30V supply that lies close to the bus. All extra

components that can be switched on the control board are supplied directly via the bus and/or internally

generated voltage 24V DC. The valves are also controlled directly on the control board. Transient

diodes protect the electronics against voltages that are too high and peak voltages.

10.2 ES variant (plug P5)

In the ES variant, an additional 24V power supply for the solenoid valve is required. This voltage is fed

into the control board via a separate plug (P5). The internal power supply of the solenoid valves is then

cut off over the switch (E).

10.3 Switch-over Standard / ES (selector switch E)

In the back of the committee there is a counter with 2 positions. With this counter can be put whether

the committee should be pursued in the standard way or in the ES way. Encoding takes place from the

Kieselmann society. The counter is sealed after the choice. A suitable mark of the type of the manage-

ment is indicated on the frame.

10.4 JTAG Interface (plug P1)

The control board is equipped with a JTAG interface that allows the processor to be equipped with new

firmware at any time. Via this interface, the firmware on the control board can be changed easily and

at any time with a handheld programmer. Other solutions with the existing hardware are then easier to

realise.

10.5 External inputs 1 (plug P4) and 2 (plug P3)

There are two input channels for processing external signals that can be brought onto the control board

by inductive or capacitive sensors. The connectable sensors are also supplied via the control board

with 24V.

10.6 Valve interface (plug F)

The interface for the connection of a maximum of 3 solenoid valves is integrated on the control board.

The solenoid valves are inserted with the air distribution block onto the control board and screwed as

one complete unit within the TOP.

25.4.12

Operation instructions: Control head 5630xxx010-000

ASi-Bus ES/ABSL

11. Electrical installation

11.1 Electrical connection of the control head

➣Plug 4-pin (14A)

•

The electrical connection of the ASI-Bus control head occurs through a plug 4-pin

(LUMBERG PRSFM4). (see Tab.1 Pin assignment)

➣Socket plug 5-pin (14C)

•

The electrical connection of the ASI-Bus control head occurs through a plug socket 5-pin (LUMBERG

PRKFM5). (see Tab.1 Pin assignment)

➣Electrical connection on the board

•

The installation of power cables from the plugs to the board is carried out by the manufacturer.

11.2 Terminal pin assignment

Tab. 1

11.3 LED Indication of slave status / Selector switch (D)

Tab. 2

Plug

(14A)

Pin No. Colour code Assignment Plug

P2 P5

1braun

brown Inputsignal Bus ASI (+)

2weiß

white ext. voltage ES 24 Volt (-)

3blau

blue Inputsignal Bus ASI (-)

4schwarz

black ext. voltage ES 24 Volt (+)

Socket plug Pin No. Colour code Assignment Plug

(14C) P3 P4

1braun

brown 24 Volt (+)

2weiß

white Sensor control line 2

3blau

blue GND

4schwarz

black Sensor control line 1

5grün/gelb

green/yellow -

LED 1Green LED 2 Red Descriptions Selector switch (D) functions

off off No main voltage present

0 = Double seat valve with both lifts

1 = Double seat valve without lifts

2 = Double seat valve with upper lift only

3 = Not used

4 = Single seat valve air open/spring closed

air closed/spring open

5 = Single seat valve air open/air close

6 = Not used

7 = Double seat valve with inverse both lift

8 = Butterfly / Ball valve air open/spring closed

9 = Butterfly / Ball valve air open/air closed

A = Butterfly / Ball valve air closed/spring open

C = reserved KIESELMANN

D = reserved KIESELMANN

E-F = Not used

on off Correct operation

off on No data exchange

Flashing on Incorrect slave address

Flashing Alternating flash

with LED1 Hardware error actuator/sensor

off Flashing Overload

LED3 - LED 6

LED 3 Green External input 2

LED 4 Green External input 1

LED 5 Red Valve closed

LED 6 Green Valve open

LED 5 / LED 6 Flashing alternately indicates

Valve in motion / error

25.4.12

Operation instructions: Control head 5630xxx010-000

ASi-Bus ES/ABSL

11.4 Electrical connection design of control head ASi-Bus ES/ABSL

D = Valve selector switch for valve type

see Tab.1

E = Selector switch: Position 1 Standard

Position 2 ES-mode

F=Plug

electrical connection for solenoid valve (MV)

P1 = JTAG Interface (Onbord programming)

P2 = Plug ASi-Bus

24V (+) braun/brown

GND (-) blau/blue

P3 = Plug - External input 2

Sensor control line weiß/white

P4 = Plug - External input 1schwarz/black

24V (+) braun/brown

GND (-) blau/blue

P5 = Plug - External voltage for solenoid valve

(ES)

24V (+) schwarz/black

24V (-) weiß/white

LED1= ASi-Bus Status

LED2= ASi-Bus Status

LED3= External input 2

LED4= External input 1

LED5= Actuator Status closed

LED6= Actuator Status open

7=Housing

14A = Plug M12 4-pin

14B = Compression gland M12

14C = M12Plug M12 5-pin

15 = Seal

16 = Signboard (optional)

Fig. 1

25.4.12

Operation instructions: Control head 5630xxx010-000

ASi-Bus ES/ABSL

12. Position control and position indication

12.1 Lifting valve

The repeat signal message ‘valve opened‘ or ‘valve closed‘ occurs contactless through the magnet field

of the pulse initiator‘s toric magnets at coverage of the Hall sensors on the board.

Valve Position Indicator

➣ELECTRICAL - through the DUO - LED on the board

• valve ’’OPEN’’ = Signal DUO-LED GREEN

• valve ’’CLOSED’’ = Signal DUO-LED RED

➣MECHANICAL - Lifting position of spindle

• valve ’’OPEN’’ = Valve position indicator - green

•

valve ’’CLOSED’’ = Valve position indicator - red

NOTE

The installation position of the pulse generator is characterized by a marking in the spindle.

The distances of the measures " A" and " B" are valve-specifically and adjusted by the factory. These

must not be adjusted.

Puls generator Fig. 2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere KIESELMANN Industrieanlagen Handbücher

KIESELMANN

KIESELMANN DN 25 Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung