Kinderkraft I-360 Bedienungsanleitung

MODEL: I-GUARD ECE.R129.03 ver. 1.2

I-360

USER GUIDE

MODEL: I-360 ECE R129.03 v.1.0

NOTE: The product graphics are for illustrative purposes only!

1.0 General information

The car seat has been designed, tested, and approved in accordance with

the requirements of UN/ECE Regulation No. 129 concerning the approval

of child restraint systems (UN/ECE R129/03).

Do not position the car seat forward-facing until the child is 15 months old

and 76 cm tall.

The car seat can be installed in the car in the positions indicated by the

manufacturer in the vehicle user’s manual. It is required to read the

vehicle user’s manual.

Please refer to the chart on the next page for correct installation

instructions.

Child’s height

Car seat orientation

Car seat installation

40cm–105cm

ISOFIX + support leg + internal safety

harness

76cm-105cm

ISOFIX + support leg + internal safety

harness

100cm-150cm

ISOFIX + three-point car seat belt

three-point car seat belt

2.0 Safety Instructions

Please take a few minutes to read this instruction manual to ensure

proper safety for your child.

•DO NOT install the car seat on rearward facing or side-

facing seats in the vehicle.

•DO NOT place the car seat on seats equipped with an

active front airbag.

• A car seat can be installed in the middle seat only if the

seat is equipped with a three-point car seat belt, ISOFIX

connectors and a Top Tether strap.

• If the car seat is installed in the front seat of the

vehicle, the front airbag must be deactivated.

• It is recommended to install the seat only in the rear

seats of the car.

A: Headrest part of the insert

B: Fasteners

C: Insert

D: Internal safety harness

E: Internal safety harness buckle

3.0 Securing the child

3.1 Installing the insert

Use the additional insert until the child reaches 76 cm.

1. Connect the headrest part of the insert to the rest of the insert with the

fasteners

2. Detach the safety harness

3. Move the seat belt to the sides of the car seat

4. Put the insert in place

A: Safety harness adjustment button

B: Safety harness

C: Safety harness adjuster strap

D: Safety harness

E: Safety harness buckle

3.2 Adjusting the safety harness

Loosen the safety harness by pressing the button and pulling the safety

harness all the way down at the same time.

1. Press the safety harness adjustment button while simultaneously

pulling the safety harness to the limit.

2. Unbuckle the safety harness

3. Move the safety harness to the sides of the car seat

4. Place the child in the car seat

5. Fasten the safety harness

6. Adjust the safety harness to the child by pulling the safety harness

adjuster strap

Adjust the height of the shoulder safety harness –it should enter the

backrest flat, horizontally, just above the child's shoulders.

A: headrest height adjuster strap

B: headrest

3.3 Headrest height

The headrest should be adjusted to the child's head well, the lower part of

the headrest should be positioned at the child's shoulder height.

1. Grasp the headrest height adjustment strap, which is located on the top

of the headrest, and pull it up gently

2. Adjust the headrest by selecting one of the nine options; when the

height is adjusted, let go of the adjustment strap

IMPORTANT: Make sure the seat headrest is locked in place





A: Backrest angle of incline adjustment lever

3.4 Backrest angle of incline adjustment

mechanism

1. Pull the backrest angle of incline adjustment lever

2. Adjust the seat angle of incline

3. Release the lever in the required position (one of five available options)

4. Move the seat slightly until you hear a distinct "click" sound

NOTE! It is possible to adjust the backrest angle of incline for children with

a height of 76-105 cm.

A: Car seat easy spin lever

3.5 Easy spin mechanism

Easy spin mechanism is a function that helps you comfortably place or

remove your child from the car seat.

1. Pull the car seat easy spin lever

2. Rotate the car seat to the side of your choice. You will hear a "click"

indicating that the car seat is locked in the selected position

3. Place your child in the car seat

4. Secure the child with the safety harness

IMPORTANT! For safety reasons, when the support leg is not fully

extended from the car seat base, the car seat locks, and it is not possible

to rotate it.

A: Safety harness adjustment button

B: Safety harness

C: Safety harness adjuster strap

D: Safety harness

E: Safety harness buckle

3.6 Securing the child with the internal safety

harness

1. Loosen the safety harness fully by pressing the button and pulling the

harness straps

2. Unfasten the buckle

3. Place the safety harness on the sides of the car seat

4. Place the child in the car seat

5. Adjust the headrest to the child's height

6. Fold the two buckle latches together to interlock and insert them into

the buckle until you hear a "click"

Inhaltsverzeichnis

Andere Kinderkraft Autositz Handbücher

Kinderkraft

Kinderkraft XPAND 2 i-Size Bedienungsanleitung

Kinderkraft

Kinderkraft Comfort Up Bedienungsanleitung

Kinderkraft

Kinderkraft XREDITION Bedienungsanleitung

Kinderkraft

Kinderkraft ONETO3 Bedienungsanleitung

Kinderkraft

Kinderkraft XRIDER i-SIZE Bedienungsanleitung

Kinderkraft

Kinderkraft MYWAY Bedienungsanleitung

Kinderkraft

Kinderkraft Unity Bedienungsanleitung

Kinderkraft

Kinderkraft MINK PRO i-Size Bedienungsanleitung

Kinderkraft

Kinderkraft MINK Bedienungsanleitung

Kinderkraft

Kinderkraft CAR SEAT ADAPTER EVOLUTION COCOON Bedienungsanleitung

Kinderkraft

Kinderkraft JUNIOR FIX Bedienungsanleitung

Kinderkraft

Kinderkraft SAFETY FIX Bedienungsanleitung

Kinderkraft

Kinderkraft JUNIOR FIX 2 i-Size Bedienungsanleitung

Kinderkraft

Kinderkraft SPARK Bedienungsanleitung

Kinderkraft

Kinderkraft I-BOOST i-Size Bedienungsanleitung

Kinderkraft

Kinderkraft Unity Bedienungsanleitung

Kinderkraft

Kinderkraft ONETO3 Bedienungsanleitung

Kinderkraft

Kinderkraft JUNIOR FIX 2 i-Size Bedienungsanleitung

Kinderkraft

Kinderkraft I-SPARK i-Size Bedienungsanleitung

Kinderkraft

Kinderkraft XPAND 2 i-Size Bedienungsanleitung

Kinderkraft

Kinderkraft XPAND Bedienungsanleitung

Kinderkraft

Kinderkraft I-GROW Bedienungsanleitung

Kinderkraft

Kinderkraft COMFORT UP i-Size Bedienungsanleitung

Kinderkraft

Kinderkraft I-GUARD Bedienungsanleitung

Beliebte Autositz Handbücher anderer Marken

Britax

Britax PARKWAY SGL Bedienungsanleitung

JANE

JANE nurse cruiser Bedienungsanleitung

Digicom

Digicom Tippy Pad Bedienungsanleitung

Giordani

Giordani orion 012 Bedienungsanleitung

BRIO

BRIO ZENTO Bedienungsanleitung

Combi

Combi Zeus Turn 8815 Series Bedienungsanleitung

Graco

Graco Car Booster Seat Bedienungsanleitung

Coccolle

Coccolle Atira Bedienungsanleitung

hifold

hifold HF01-GL Bedienungsanleitung

CYBEX

CYBEX SOLUTION X2-FIX Bedienungsanleitung

kiwy

kiwy SLF 123 Bedienungsanleitung

Safety 1st

Safety 1st Summit ISO 30 Bedienungsanleitung

Safety 1st

Safety 1st Grand 2-IN-1 Bedienungsanleitung

Graco

Graco NAUTILUS Bedienungsanleitung

Britax

Britax Multi-Tech BB0-702-00 Bedienungsanleitung

Grammer

Grammer MSG45/421 Betriebsanleitung

Nuna

Nuna REBL PLUS Bedienungsanleitung

Graco

Graco Child Restraint Bedienungsanleitung